[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 296.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: VeritasSapere on November 07, 2014, 01:46:54 PM

Quote from: promojo on November 07, 2014, 01:27:47 AM

Quote from: VeritasSapere on November 06, 2014, 06:46:03 PM

I have a question. would it be possible to put say 3xSP31 inside of one of these:

http://www.acoustiproducts.com/en/ucoustic_active.asp

I would have the ducting setup aswell so that i can vent the hot air out of the building, i am also in a cold climate. I am sure that there must be many people here intrested in making it easier living with these machines. Grin

Yes, this has been done with 2-3 spondoolies

Thankyou

I want the 24U one but its so heavy Sad

No way I can move that thing.

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: edgar on November 09, 2014, 02:05:51 AM

Unfortunately not.

Fan remains at 100% throughout.

G & Y leds remain unlit.

Ether/LAN leds alternate between solid, blinking and off
By SW upgrade i assume you mean SD Recoveries?

If im mistaken, please advise at your earliest convenience.

Before beginning the RMA process, would it be possible to have an SP20 exclusive SD image to try?

EDIT - after about 8 IDENTICAL 'recoveries' it has shown up again as SP30 with SP30 fw and SP30UI

After more skype-ing and correct understanding it was FW Upgrades x 2 PLUS reboot that eventually got it back in the ring.

Sorted! (1534 GH/s - fan at 90, max power at 285)

(now back to day 9 of Data Recovery...)

Glad you got it sorted edgar.

I'm still on 2.5.7 with no issues, running two 100CFM fans so noise is solved, but heat is my problem, I've got temps of 35 °C / 87,89 °C with max power set at 250W and a solid 1355 GH/s

Need to get some cool air into the room, time for some building modifications methinks.

edgar

legendary

Activity: 1848

Merit: 1001

Unfortunately not.

Fan remains at 100% throughout.

G & Y leds remain unlit.

Ether/LAN leds alternate between solid, blinking and off
By SW upgrade i assume you mean SD Recoveries?

If im mistaken, please advise at your earliest convenience.

Before beginning the RMA process, would it be possible to have an SP20 exclusive SD image to try?

EDIT - after about 8 IDENTICAL 'recoveries' it has shown up again as SP30 with SP30 fw and SP30UI

After more skype-ing and correct understanding it was FW Upgrades x 2 PLUS reboot that eventually got it back in the ring.

Sorted! (1534 GH/s - fan at 90, max power at 285)

E2A - 25 hrs downtime

Fan 90 just upped to 100, FW 2.5.6

Temp Front / Back T,B
40 °C / 86,81 °C
Fan Speed
100
Start Voltage
0.68 / 0.68 / 0.68 / 0.68
Max Voltage
0.75
Max Watts
285 / 285 / 285 / 286

Best Share
4885467
Miner time
Sun, 09 Nov 2014 13:00
System Uptime
2 hr 56 min 57 sec
CGMiner Uptime
2 hr 53 min 1 sec

i removed the add2psu adapter and just jumped the 2 cougar 700s separately.

(now back to day 9 of Data Recovery...)

zvisha

hero member

Activity: 560

Merit: 500

Quote from: edgar on November 08, 2014, 09:54:37 PM

after following zvis guidelines and attempting to recover my sp20 with an SP30 recovery SD, which failed.. Multiple times.
Then a fresh SP30 boot SD, which also failed. Multiple times.
My SP20 now claims it is an SP30 - and fails to run CGMiner (miner gate started but then stopped)
i asked numerous times if the SD cards were compatible - to which the reply was yes.
zvi has authorized it for return but that will only add to the daily losses.
...
...
...
In desperation i have opted for the factory reset button -
.......aaaaaaaand it's gone! Again!
Has anybody ACTUALLY recovered an sp20 using the sp30 recovery and/or boot SD??

Do 2 SW upgrades and it will be back to being SP20.

stan258

sr. member

Activity: 440

Merit: 250

I can upload a back up image of My SP 20 tonight. I didnt update shit after i put it back together. let me know what site is preferable. I am in Las Vegas and work till 3AM my time. Call it 330AM for me to run over to my shop.

Quote from: edgar on November 08, 2014, 09:54:37 PM

after following zvis guidelines and attempting to recover my sp20 with an SP30 recovery SD, which failed.. Multiple times.

Then a fresh SP30 boot SD, which also failed. Multiple times.

My SP20 now claims it is an SP30 - and fails to run CGMiner (miner gate started but then stopped)

i asked numerous times if the SD cards were compatible - to which the reply was yes.

zvi has authorized it for return but that will only add to the daily losses.

...

...

...

In desperation i have opted for the factory reset button -

.......aaaaaaaand it's gone!

Again!

stan258

sr. member

Activity: 440

Merit: 250

Quote from: wh00per on November 08, 2014, 05:33:04 PM

Quote from: bobsmoke on November 08, 2014, 05:25:26 PM

Quote from: wh00per on November 08, 2014, 04:25:03 PM

That's (1472) the power at the wall for that PSU. You'll fry your kill-a-watt in 240V.

so that value can be used to estimate the electricity bill .... thanks!

What you see there is the instantaneous power in watts. If you chart it over one hour, (because it's fluctuating up and down) the area under the chart line represents the energy used, and is expressed in Watt x Hour (Wh) or kWh if the numbers are big

The 4th chart HERE shows exactly what you look for.

Use a metered pdu.

edgar

legendary

Activity: 1848

Merit: 1001

after following zvis guidelines and attempting to recover my sp20 with an SP30 recovery SD, which failed.. Multiple times.

Then a fresh SP30 boot SD, which also failed. Multiple times.

My SP20 now claims it is an SP30 - and fails to run CGMiner (miner gate started but then stopped)

i asked numerous times if the SD cards were compatible - to which the reply was yes.

zvi has authorized it for return but that will only add to the daily losses.

...

...

...

In desperation i have opted for the factory reset button -

.......aaaaaaaand it's gone! Again!

Has anybody ACTUALLY recovered an sp20 using the sp30 recovery and/or boot SD??

wh00per

hero member

Activity: 572

Merit: 500

Quote from: bobsmoke on November 08, 2014, 05:25:26 PM

Quote from: wh00per on November 08, 2014, 04:25:03 PM

That's (1472) the power at the wall for that PSU. You'll fry your kill-a-watt in 240V.

so that value can be used to estimate the electricity bill .... thanks!

What you see there is the instantaneous power in watts. If you chart it over one hour, (because it's fluctuating up and down) the area under the chart line represents the energy used, and is expressed in Watt x Hour (Wh) or kWh if the numbers are big

The 4th chart HERE shows exactly what you look for.

bobsmoke

sr. member

Activity: 314

Merit: 250

Quote from: wh00per on November 08, 2014, 04:25:03 PM

That's (1472) the power at the wall for that PSU. You'll fry your kill-a-watt in 240V.

so that value can be used to estimate the electricity bill .... thanks!

wh00per

hero member

Activity: 572

Merit: 500

Quote from: bobsmoke on November 08, 2014, 01:43:32 PM

Hi, it might be a dumb question but ..... can someone tell me if I can determine the kW usage of my SP31 based on the web interface settings or do I need a device similar to Kill-a-watt?

One of the PSU shows:
PSU[EMERSON1200]: 1472->1328w[1328 1328 1328] (->1361w[1361 1361 1361]) (lim=1330) 0c cooling:0/0x10007000

thx

That's (1472) the power at the wall for that PSU. You'll fry your kill-a-watt in 240V.

WTF .. am I still in the SPT thread ?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: mavericklm on November 08, 2014, 03:52:32 PM

This is Spondoolies-Tech thread not price comparative thread.
Server grade is server grade! I got 7 s1 in my house and i don't cry!
Go buy more knc, hope you burn all your 6pins conections!!!

The SP3+ units are great

so far from my experience the sp20s are underwhelming and I thnink that is what he is talking about.

From my tests the issue seems to be somewhat power related. I think the SP20 would have been a better machine

with an included PSU that could handle those chips. The sp20 has already fried one of my PSUs ( a 1200Watt corsair)

right now I am using and 800Watt and a 1000 watt unit which should be plenty of overhead.

Sad thing is these chips are quite powerfull. when I set the voltages to .79 (max) I'm getting 1.78 TH at 1200 watts but its far too unstable.

this is my most stable settings

1652.08Ghs at 1190 Watts

Temp Front / Back T,B 27 °C / 78,76 °C Fan
Speed90
Start Voltage 0.78 / 0.75 / 0.77 / 0.75
Max Voltage0.79
Max Watts288 / 288 / 288 / 288

Code:


Uptime:18 | FPGA ver:100
-----BOARD-0-----
PSU[UNKNOWN]: 0->303w[303 0 0] (->303w[303 0 0]) (lim=288) 0c cooling:0/0x0
-----BOARD-1-----
PSU[UNKNOWN]: 0->279w[279 0 0] (->279w[279 0 0]) (lim=288) 0c cooling:0/0x0
-----BOARD-2-----
PSU[UNKNOWN]: 0->273w[273 0 0] (->273w[273 0 0]) (lim=288) 0c cooling:0/0x0
-----BOARD-3-----
PSU[UNKNOWN]: 0->287w[287 0 0] (->287w[287 0 0]) (lim=288) 0c cooling:0/0x0
LOOP[0] ON
 0: DC2DC/1/:[vlt1:748 vlt2:751(DCl:751 Tl:794 Ul:789) 115W 154A  64c] ASIC:[ 85c (125c) 1115hz(BL:1115)   11 (E:192) F:0]
 1: DC2DC/1/:[vlt1:757 vlt2:767(DCl:767 Tl:794 Ul:789) 109W 142A  82c] ASIC:[ 85c (125c) 1115hz(BL:1115)   11 (E:191) F:0]
LOOP[1] ON
 2: DC2DC/1/:[vlt1:744 vlt2:749(DCl:794 Tl:794 Ul:789) 90W 121A  89c] ASIC:[115c (125c) 1055hz(BL:1055)   10 (E:193) F:0]
 3: DC2DC/1/:[vlt1:742 vlt2:749(DCl:794 Tl:794 Ul:789) 99W 132A  94c] ASIC:[120c (125c) 1050hz(BL:1050)   18 (E:193) F:0]
LOOP[2] ON
 4: DC2DC/1/:[vlt1:744 vlt2:749(DCl:794 Tl:794 Ul:789) 107W 143A  60c] ASIC:[ 85c (125c) 1035hz(BL:1035)    8 (E:193) F:0]
 5: DC2DC/1/:[vlt1:746 vlt2:749(DCl:794 Tl:794 Ul:789) 105W 141A  76c] ASIC:[ 85c (125c) 1040hz(BL:1040)    4 (E:193) F:0]
LOOP[3] ON
 6: DC2DC/1/:[vlt1:744 vlt2:749(DCl:794 Tl:794 Ul:789) 114W 152A  84c] ASIC:[115c (125c) 1105hz(BL:1105)   11 (E:193) F:0]
 7: DC2DC/1/:[vlt1:742 vlt2:749(DCl:794 Tl:794 Ul:789) 110W 147A  90c] ASIC:[120c (125c) 1045hz(BL:1045)    4 (E:193) F:0]

[H:HW:1652Gh,W:853,L:0,A:8,MMtmp:0 TMP:(27)=>=>=>(74,72)]
Pushed 29 jobs , in HW queue 4 jobs (sw:2, hw:2)!
min:14 wins:77[this/last min:77/0] bist-fail:20, hw-err:0
leading-zeroes:37 idle promils[s/m]:57/66, rate:0gh/s asic-count:8
Fan:90, conseq:141
AC2DC BAD: 0 0
R/NR: 7/0
RTF asics: 0
 0 restarted      0 reset          0 reset2         0 fake_wins
 0 stuck_bist     0 low_power      0 stuck_pll      0 runtime_dsble
 0 purge_queue    0 read_timeouts  0 dc2dc_i2c       0 read_tmout2    0 read_crptn
 0 purge_queue3   0 bad_idle
 0 err_murata
Adapter queues: rsp=2, req=5
FET:
0:9 1:9

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: dropt on November 08, 2014, 03:55:33 PM

KnC's Neptune's are huge fire hazards... and you have five of them!

You also paid $3,000 per TH. LOL!

KnC is garbage, and the fact you're toting them as the "best miners at all" is pure comedy.

I bought my 5 Neptunes used. First for 2800 euros (Two weeks old), and I paid for the others 4.25BTC - 4.5BTC
I bought a separate the Y cables and have no fire hazards.

KNC NEPTUNE is still the best W/GHs miner.

jjdub7

hero member

Activity: 938

Merit: 502

Quote from: mavericklm on November 08, 2014, 03:52:32 PM

This is Spondoolies-Tech thread not price comparative thread.
Server grade is server grade! I got 7 s1 in my house and i don't cry!
Go buy more knc, hope you burn all your 6pins conections!!!

Better to burn your 6pins than your entire warehouse. Can't determine the cause of the Thai fire? Derp engineers derp

samsonn25

hero member

Activity: 882

Merit: 1003

I would rather buy .8 bitcoins for $270 since that is what a Neptune will mine in its lifetime, then buy one on Ebay next year for a souvenier with all the extra money saved.

dropt

legendary

Activity: 1512

Merit: 1000

Quote from: Tupsu link=topic=521520.msg9481981#msg9481981
I have 5 KNC Neptune. So far, the best miners at all.
3400Gh/s 2090W [b

0,615W/GHs[/b]
Your manufacturer of high quality Miners have not yet been reached this limit.

KnC's Neptune's are huge fire hazards... and you have five of them!

You also paid $3,000 per TH. LOL!

KnC is garbage, and the fact you're toting them as the "best miners at all" is pure comedy.

mavericklm

hero member

Activity: 742

Merit: 500

This is Spondoolies-Tech thread not price comparative thread.
Server grade is server grade! I got 7 s1 in my house and i don't cry!
Go buy more knc, hope you burn all your 6pins conections!!!

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: mavericklm on November 08, 2014, 02:15:48 PM

Overpriced? Really? Then go buy knc! Are they asking 10000$/th/s?
Compare quality with all the other manufacturers! Quality is what you pay for!
You have 1360$ and you are crying!!! compare yourself with a starving kid with no parents, who lives on the streets! Hypocrite!
You are one of those pricks driving S class benz and crying that you got no money for gas!
You got compensation in btc, you moron! not like bitmain in coupons! or better yet:
GO BUY FROM BFL!!!!!!!!!

Yes, Overpriced, Compared to the Antminer S4, which is also In Stock hardware.
S4 with shipping 1381 USD 2000GH/s. 0,69 USD/GHs
SP20 with shipping 1360USD 1700GH/s 0,8 USD/GHs
Home mining is back:Home mining with the best technology available.

How can something that is same loud as a Avalon Patch1 miner, meant to be for home mining?
Would they have been deaf to all from their previous miners? If this is not the buyer's cheating...
or that it is

Quote from: mavericklm on November 08, 2014, 12:42:36 PM

...
I see top hardware, good communication, best user support, nice ethics!!!
....

Quote from: mavericklm on November 08, 2014, 02:15:48 PM

.... Then go buy knc! ....
...

I have 5 KNC Neptune. So far, the best miners at all.
3400Gh/s 2090W 0,615W/GHs
Your manufacturer of high quality Miners have not yet been reached this limit.

mavericklm

hero member

Activity: 742

Merit: 500

yes mama!

seriouscoin

hero member

Activity: 658

Merit: 500

Quote from: mavericklm on November 08, 2014, 02:15:48 PM

Overpriced? Really? Then go buy knc! Are they asking 10000$/th/s?
Compare quality with all the other manufacturers! Quality is what you pay for!
You have 1360$ and you are crying!!! compare yourself with a starving kid with no parents, who lives on the streets! Hypocrite!
You are one of those pricks driving S class benz and crying that you got no money for gas!
You got compensation in btc, you moron! not like bitmain in coupons! or better yet:
GO BUY FROM BFL!!!!!!!!!

Where is your mom? how did you get on the internet?

Stupid kid, go clean your room.

mavericklm

hero member

Activity: 742

Merit: 500

Overpriced? Really? Then go buy knc! Are they asking 10000$/th/s?
Compare quality with all the other manufacturers! Quality is what you pay for!
You have 1360$ and you are crying!!! compare yourself with a starving kid with no parents, who lives on the streets! Hypocrite!
You are one of those pricks driving S class benz and crying that you got no money for gas!
You got compensation in btc, you moron! not like bitmain in coupons! or better yet:
GO BUY FROM BFL!!!!!!!!!

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 296. (Read 1260290 times)