Author

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 600. (Read 1260354 times)

legendary
Activity: 1274
Merit: 1000
Personal text my ass....
Just noticed that on the WebHostingTalk forum the price is only $50/month and here it is $150/month. I know I'm missing something.


It's a matter of power usage and from the lack of info on the WebHostingTalk forum. There the power isn't mentioned and typical 1U servers need just around 300W-400W to run. Quotes from DataCenters include only a limited amount of power per U space. Bitcoin miners are unusual when it comes to this because they need A LOT of power compared to regular servers.

So in short, it  was just a mistake?
Thanks!
full member
Activity: 154
Merit: 100
Can someone please recommend a good noise-cancelling server rack, which will be able to handle the heat and power for SP10? I am considering to buy some, need to figure out, how to handle that noise Smiley

Thanks in advance!

Cheers.
legendary
Activity: 1904
Merit: 1007
Just noticed that on the WebHostingTalk forum the price is only $50/month and here it is $150/month. I know I'm missing something.


It's a matter of power usage and from the lack of info on the WebHostingTalk forum. There the power isn't mentioned and typical 1U servers need just around 300W-400W to run. Quotes from DataCenters include only a limited amount of power per U space. Bitcoin miners are unusual when it comes to this because they need A LOT of power compared to regular servers.
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
2 Spondoolie SP10's for sale in NJ

If you live in or around NJ and want a couple SP10's let me know. Dad and I are selling ours that we just received this week. Both work perfectly, are built like tanks but just a little too noisy for us in our homes. My girlfriend rules my world I guess. We just don't have the accommodations and setup like some of you have at home so that's why we are selling them. And it kills me as I write this because bitcoin is now over $600.

We paid $2795+$193 shipping = $2988

We are selling both for $5200, which is $2600 for each one. Gives you almost $400 off each one. Please, the price is firm.

If you are interested please message me here on the forums and I'll give you my contact information. I would need to drive my SP10 to my Dad's place, which is a couple hours away so if you are interested please contact me as soon as you can. I'll check the forums as much as I can today.

Thank you,

Michael

just added this:
=====================
URL: http://www.michigan-colocation.com/index.php/server-colocation/bitcoin-miner-hosting
Price: SP10-~$150/mth, S2-$150/mth, Cointerra $330/mth, mth to mth, no setup fee
Location: Troy, MI 48083
Comment:
Thread: http://www.webhostingtalk.com/showthread.php?t=1379980
=====================


Why not colocate them here?

Just noticed that on the WebHostingTalk forum the price is only $50/month and here it is $150/month. I know I'm missing something.
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
For some reason after multiple successful fedex deliveries... my next order was shipped DHL?

I did read they were going to try different delivery companies. I think FedEx is the best, but DHL works Saturdays, and maybe that's what their looking for.

full member
Activity: 627
Merit: 103
Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?

Please email again to sales@

We're overwhelmed with requests, so might have missed your email. My apologies.
No problem to fulfill that or much larger quantity
If you'll purchase with BTC, we'll ship on Monday
If you'll purchase with wire transfer, we'll ship after confirming the funds in our account

Guy
done
member
Activity: 99
Merit: 10
Received a unit today - very thoughtful design and packaging (my unit came from a skid holding several) The noise at startup with 100% fans is hilariously highpitched and loud.

currently running at 1.25TH  with 40% fans and 84C at the exhaust. At 40% fans the PSU is distinctly a bit louder. I might tweak it down aiming for 80C soon


edit: got this thing up on the windowsill and built a nice housing for it out of the carboard box/form it shipped in. does a very good job bringing noise down by about 50%. However, while the miner webpage says I have a speed of 1.295TH my eligius pool is only reporting ~1.1TH http://eligius.st/~wizkid057/newstats/userstats.php/1Kt7LQ2MgGmyAWVFr8L8qQzwPhubK2QtCM.  Input/exhaust temps are 30C/66C  (inlet is more like 23C in reality).

is this issue just related to needing a better 3hr sample or is something in need of tweaking?



Yes, wait for your 3 hour sampling that's what it uses for your estimates.

Regards,

~Blaise
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
Received a unit today - very thoughtful design and packaging (my unit came from a skid holding several) The noise at startup with 100% fans is hilariously highpitched and loud.

currently running at 1.25TH  with 40% fans and 84C at the exhaust. At 40% fans the PSU is distinctly a bit louder. I might tweak it down aiming for 80C soon


edit: got this thing up on the windowsill and built a nice housing for it out of the carboard box/form it shipped in. does a very good job bringing noise down by about 50%. However, while the miner webpage says I have a speed of 1.295TH my eligius pool is only reporting ~1.1TH http://eligius.st/~wizkid057/newstats/userstats.php/1Kt7LQ2MgGmyAWVFr8L8qQzwPhubK2QtCM.  Input/exhaust temps are 30C/66C  (inlet is more like 23C in reality).

is this issue just related to needing a better 3hr sample or is something in need of tweaking?

hero member
Activity: 728
Merit: 500
Does firmware update not update image? How do you check your version?
hero member
Activity: 560
Merit: 500
After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57


my miner stopped hashing today  Sad

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.
late update, up and running again.
the psu was orange. Unit cold / frozen but fan blown cold. I re-image firmware (ty for instructions) and upgraded unit. 1.5th/s on pools now amazing !

Yes, latest image has slightly better rate in pool - that is also because of the new interface with cgminer allowing 2 shares per job. 
full member
Activity: 627
Merit: 103
They might be on holidays...

Due to Shavuot ("Feast of Weeks", Pentecost) holiday, shipments will be done on Saturday night, Monday and Thursday.

They can do larger orders and better rates I am pretty sure. Talk to Roadstress in PM he can help you.

Thanks for that. You lot are very helpful!
member
Activity: 119
Merit: 100
noobie
After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57


my miner stopped hashing today  Sad

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.
late update, up and running again.
the psu was orange. Unit cold / frozen but fan blown cold. I re-image firmware (ty for instructions) and upgraded unit. 1.5th/s on pools now amazing !
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?

Please email again to sales@

We're overwhelmed with requests, so might have missed your email. My apologies.
No problem to fulfill that or much larger quantity
If you'll purchase with BTC, we'll ship on Monday
If you'll purchase with wire transfer, we'll ship after confirming the funds in our account

Guy
full member
Activity: 627
Merit: 103
Are the SP10 units still shipping???

SP10 DAWSON - IMMEDIATE DELIVERY

$2,795.00
We accept payment in Bitcoin, Dollars, or Euro. Prices given in dollars.

http://www.spondoolies-tech.com/products/sp10-dawson-may-second-batch

According to the website they are...

Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?
hero member
Activity: 756
Merit: 502
Sorry i should have included more info. I have emailed them regarding a large bulk purchase and havnt got a reply. Anyone know where to get 20 - 40 of them?

Please re-send again to [email protected].

Thanks.
hero member
Activity: 924
Merit: 1000
They might be on holidays...

Due to Shavuot ("Feast of Weeks", Pentecost) holiday, shipments will be done on Saturday night, Monday and Thursday.

They can do larger orders and better rates I am pretty sure. Talk to Roadstress in PM he can help you.

Thanks for that. You lot are very helpful!

You are welcome. I hope to be.
hero member
Activity: 924
Merit: 1000
They might be on holidays...

Due to Shavuot ("Feast of Weeks", Pentecost) holiday, shipments will be done on Saturday night, Monday and Thursday.

They can do larger orders and better rates I am pretty sure. Talk to Roadstress in PM he can help you track down the STech guys... if they are even available at this time.
hero member
Activity: 924
Merit: 1000
Are the SP10 units still shipping???

SP10 DAWSON - IMMEDIATE DELIVERY

$2,795.00
We accept payment in Bitcoin, Dollars, or Euro. Prices given in dollars.

http://www.spondoolies-tech.com/products/sp10-dawson-may-second-batch

According to the website they are...
full member
Activity: 627
Merit: 103
Are the SP10 units still shipping???
member
Activity: 119
Merit: 100
noobie
After some rest it works again!

I reduced the power consumtion to 1180 and the
DC2DC Current Limit to 57


my miner stopped hashing today  Sad

ASIC STATS is empty

DCR says

DC2DC DCR inductor flag loop 0 (0xD0) = -1
i2c write 0x71 = 0x2 error2
i2c write 0x72 = 0x0 error2

Post in the thread in my sig. You tried all the restart types?

same issue but mine is not responding anymore after I downgrade the firmware... in add of, the minergate process was rebooting all the time...
i go to the datacenter to re-image it.

btw my others SP10 doesn't have any issue.
Jump to: