[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 639.

DevonMiner

sr. member

Activity: 471

Merit: 250

Quote from: zvisha on May 07, 2014, 04:00:42 AM

Quote from: seriouscoin on May 06, 2014, 08:54:33 PM

Spondoolies, does the SP10 firmware check fans activity?

I'm about to test my air chamber and i'm ready to remove the fans (PSU fan is still intact)

Let me know if its a problem with the FW.

Thanks

No, we monitor the temperature of ASICs/on board, not the fan activity.
Good luck!

Is this something you might look at in the future? I have read the fans run fulltime 24/7 ... can you update the firmware so they are PWM regulated? I'm sure this was mentioned way back in the thread, sorry if I missed something ... two SP10's arriving soon, so I'm interested if the noise can be 'contained'.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: gallery2000 on May 07, 2014, 10:36:56 AM

Quote from: wanna4fun on May 07, 2014, 09:02:47 AM

Quote from: Biodom on May 06, 2014, 07:49:27 PM

Quote from: wanna4fun on May 06, 2014, 02:54:38 AM

I can't imagine letting one SP10 running around me. If you put it on your balcony, the neighborhood will hate you.

can anybody post decibel reading of SP-10 at 1.4-1.5 th/s within a feet or so? There are free android and apple apps that do it.
I am just trying to see how noisy (or not) it is in comparison with S1.

What ambient temperature would Sp-10 tolerate?
i have an extra room, but when i put 3 S1 there and closed the door, temp rose to ~35 degree celsius, so I had to open the door. obviously, if SP10 is like a rock band, it would be difficult.
I figure that heat-wise 1 SP10=3 S1 (with much higher productivity for Sp-10, of course)

it's max 35°C ans as said by SP-Tech it can run with ambiant air @45°C (they said it worked for them). Don't go to hot or you will lose a lot of hashrate. Plus, I want to say that if air go in @ 22-23°C it comes out @45-46°C. You must evacuate all of this hot air. I bet you can do something fancy with this hot air like powering a Stirling engine Cheesy

The noise is about 70 dB within 3 feets. It's like 3/4 vacuum cleaner at the same time and I underestimate the reality. It's a high pitch fan noise.

Are they going to to cover your hearing aides if you go deaf?

here's the plan, send em to your mothers and fathers garages where you'll get pensioners rates on leccy. they are deaf already, right? job jobbed. Cool

gallery2000

hero member

Activity: 784

Merit: 1000

Live Stars - Adult Streaming Platform

Quote from: wanna4fun on May 07, 2014, 09:02:47 AM

Quote from: Biodom on May 06, 2014, 07:49:27 PM

Quote from: wanna4fun on May 06, 2014, 02:54:38 AM

I can't imagine letting one SP10 running around me. If you put it on your balcony, the neighborhood will hate you.

can anybody post decibel reading of SP-10 at 1.4-1.5 th/s within a feet or so? There are free android and apple apps that do it.
I am just trying to see how noisy (or not) it is in comparison with S1.

What ambient temperature would Sp-10 tolerate?
i have an extra room, but when i put 3 S1 there and closed the door, temp rose to ~35 degree celsius, so I had to open the door. obviously, if SP10 is like a rock band, it would be difficult.
I figure that heat-wise 1 SP10=3 S1 (with much higher productivity for Sp-10, of course)

it's max 35°C ans as said by SP-Tech it can run with ambiant air @45°C (they said it worked for them). Don't go to hot or you will lose a lot of hashrate. Plus, I want to say that if air go in @ 22-23°C it comes out @45-46°C. You must evacuate all of this hot air. I bet you can do something fancy with this hot air like powering a Stirling engine Cheesy

The noise is about 70 dB within 3 feets. It's like 3/4 vacuum cleaner at the same time and I underestimate the reality. It's a high pitch fan noise.

Are they going to to cover your hearing aides if you go deaf?

tzortz

hero member

Activity: 728

Merit: 500

I love this!

wanna4fun

member

Activity: 119

Merit: 100

noobie

Quote from: Biodom on May 06, 2014, 07:49:27 PM

Quote from: wanna4fun on May 06, 2014, 02:54:38 AM

I can't imagine letting one SP10 running around me. If you put it on your balcony, the neighborhood will hate you.

can anybody post decibel reading of SP-10 at 1.4-1.5 th/s within a feet or so? There are free android and apple apps that do it.
I am just trying to see how noisy (or not) it is in comparison with S1.

What ambient temperature would Sp-10 tolerate?
i have an extra room, but when i put 3 S1 there and closed the door, temp rose to ~35 degree celsius, so I had to open the door. obviously, if SP10 is like a rock band, it would be difficult.
I figure that heat-wise 1 SP10=3 S1 (with much higher productivity for Sp-10, of course)

it's max 35°C ans as said by SP-Tech it can run with ambiant air @45°C (they said it worked for them). Don't go to hot or you will lose a lot of hashrate. Plus, I want to say that if air go in @ 22-23°C it comes out @45-46°C. You must evacuate all of this hot air. I bet you can do something fancy with this hot air like powering a Stirling engine Cheesy

The noise is about 70 dB within 3 feets. It's like 3/4 vacuum cleaner at the same time and I underestimate the reality. It's a high pitch fan noise.

seriouscoin

hero member

Activity: 658

Merit: 500

Quote from: murdof on May 07, 2014, 07:03:12 AM

Quote from: zvisha on May 07, 2014, 04:00:42 AM

No, we monitor the temperature of ASICs/on board, not the fan activity.
Good luck!

What happens if the temperature in the room goes higher than that? I have an airconditioner that sometimes decides to turn off on its own (yes it needs replacement).
In that case your device will stop mining/shutdown?

yes

murdof

full member

Activity: 196

Merit: 100

Quote from: zvisha on May 07, 2014, 04:00:42 AM

No, we monitor the temperature of ASICs/on board, not the fan activity.
Good luck!

What happens if the temperature in the room goes higher than that? I have an airconditioner that sometimes decides to turn off on its own (yes it needs replacement).
In that case your device will stop mining/shutdown?

zvisha

hero member

Activity: 560

Merit: 500

Quote from: seriouscoin on May 06, 2014, 08:54:33 PM

Spondoolies, does the SP10 firmware check fans activity?

I'm about to test my air chamber and i'm ready to remove the fans (PSU fan is still intact)

Let me know if its a problem with the FW.

Thanks

No, we monitor the temperature of ASICs/on board, not the fan activity.
Good luck!

seriouscoin

hero member

Activity: 658

Merit: 500

Spondoolies, does the SP10 firmware check fans activity?

I'm about to test my air chamber and i'm ready to remove the fans (PSU fan is still intact)

Let me know if its a problem with the FW.

Thanks

ShadesOfMarble

donator

Activity: 543

Merit: 500

Quote from: Biodom on May 06, 2014, 07:49:27 PM

What ambient temperature would Sp-10 tolerate?

Up to 35°C

Biodom

legendary

Activity: 3990

Merit: 4597

Quote from: wanna4fun on May 06, 2014, 02:54:38 AM

I can't imagine letting one SP10 running around me. If you put it on your balcony, the neighborhood will hate you.

can anybody post decibel reading of SP-10 at 1.4-1.5 th/s within a feet or so? There are free android and apple apps that do it.
I am just trying to see how noisy (or not) it is in comparison with S1.

What ambient temperature would Sp-10 tolerate?
i have an extra room, but when i put 3 S1 there and closed the door, temp rose to ~35 degree celsius, so I had to open the door. obviously, if SP10 is like a rock band, it would be difficult.
I figure that heat-wise 1 SP10=3 S1 (with much higher productivity for Sp-10, of course)

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: QuiveringGibbage on May 06, 2014, 04:06:25 PM

Hey Spondoolies,

I have funds for single SP10 but I want a pair. I noticed the May batch has an offer for a pair. Is there a similar deal for the June batch?

Additionally, if we have already pre-ordered a SP30, any chance of getting a further 10% discount?

I just need a little more motivation to withdraw more funds for a second June SP10s (on top of the SP30) and it's also a toss up between SP10 and Habanero.

Cheers,
QG

How about joining my new GB: https://bitcointalksearch.org/topic/closedspondoolies-tech-sp10-14-145ths-2795-shipping-598502 1 SP10 for $3,200!

QuiveringGibbage

hero member

Activity: 617

Merit: 543

http://idontALT.com

Hey Spondoolies,

I have funds for single SP10 but I want a pair. I noticed the May batch has an offer for a pair. Is there a similar deal for the June batch?

Additionally, if we have already pre-ordered a SP30, any chance of getting a further 10% discount?

I just need a little more motivation to withdraw more funds for a second June SP10s (on top of the SP30) and it's also a toss up between SP10 and Habanero.

Cheers,
QG

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: jedimstr on May 06, 2014, 03:12:16 PM

Quote from: ZiG on May 06, 2014, 02:59:50 PM

GPU farm is easy...put on E-bay... Grin

Not so easy... have you seen the prices for GPU's that people are willing to let them go at? Way too low compared to a few months ago... bleh.

yeah no way i am tossing 18-20 gpu's I paid $400-500 for for $300 per.

plus I am still mining alt coins with the hope one or two will blow up in the near future. I could have made a bundle on WC an AC if I had just sold after POW ended.

Back to the topic , what do you guys thing about hosting a single SP30 in a basement come august?

gallery2000

hero member

Activity: 784

Merit: 1000

Live Stars - Adult Streaming Platform

Quote from: seriouscoin on May 05, 2014, 10:40:24 PM

Quote from: tzortz on May 05, 2014, 03:40:25 PM

Quote from: seriouscoin on May 05, 2014, 08:40:33 AM

I recommend this : http://www.amazon.com/Mitsubishi-Single-Zone-Split-Conditioning-System/dp/B0060OU3DO/ref=sr_1_3?ie=UTF8&qid=1399297076&sr=8-3&keywords=mitsubishi+split+air+conditioner

It can be used for home if you no longer mining.

Always get Mitsubishi system, the best split system bar none

Easy to install, and heatpump is outside for best efficiency

It is a nice a/c, but IMHO It is useless to waste energy cooling something that is so energy efficient.
Also, those a/c's are not designed for a 100% duty cycle, as are for home use.

You either decide to send it to a DC, or build a nice polyurethane kiosk and use at least 4x 40w industrial fans with extra filters used for electrical cabinets.
http://www.brenclosures.com.au/pdfs/texa_datasheets/TX-FAN28.pdf

It will do the job and keep also a low energy consumption.

Dude, you compare 2 completely different scenarios. The whole point of using split system is because ..... you dont have ventilation !!!! Gee...

If you can vent air to exchange with the outside then, A/C doesnt help much.

I believe the poster want to use closet. Last time i check my closet doesnt have windows or balcony.

Maybe it is time for you to come out of the closet?

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: ZiG on May 06, 2014, 02:59:50 PM

GPU farm is easy...put on E-bay... Grin

Not so easy... have you seen the prices for GPU's that people are willing to let them go at? Way too low compared to a few months ago... bleh.

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: Marvell1 on May 06, 2014, 02:47:32 PM

Quote from: Searing on May 06, 2014, 06:02:26 AM

Quote from: Guy Corem on May 06, 2014, 05:23:31 AM

I wouldn't recommend anyone to do a DYI immersion cooling with 3M Novec. Too complex and too dangerous.
Arguably, it might make sense on large scale.

Find cheap hosting deal instead. There are a lot of options available online. Our miners software is suitable for remote management via HTTPS.

well i did not get any of these units...in a prev post even with the group order deal and 10 percent off due to prev knc purchases...at 440 usd coin
47% difficulty and 15c kwh elec and the 'hopeful' 6.5Th it essentially broke even...ie I'd get the same coin if I bought vs what I'd get out...not to
mention at 2500 watts likely would have to kick up the 100 amp service in the house to 200 amp..er again this would have been at a $4495 usd price
including shipping

my point is thou it is interesting ..that their hosting of equip is more or less exactly what I would pay (from what i can figure) in Minnesota...

electricity to run the beastie

so anyway if there is a way in the future to justify getting one of these beasts vs just getting coin I will consider it...likely it would have to be

another 'group order' which I've seen none mentioned....

anyway....hosting my equip looks like maybe a wash either way.....same $$$ assuming my 100amp could take 1 2500w 24/7..heh

(er cooling crap i forgot cooling)

still fence sitting but interested

Searing

lol another MN miner , i wish it was still winter...
I'm thinking of hosting an sp30 in my basement, seems cool right now , problem is I have to figure out where to put my GPU farm as well

GPU farm is easy...put on E-bay... Grin

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Searing on May 06, 2014, 06:02:26 AM

Quote from: Guy Corem on May 06, 2014, 05:23:31 AM

I wouldn't recommend anyone to do a DYI immersion cooling with 3M Novec. Too complex and too dangerous.
Arguably, it might make sense on large scale.

Find cheap hosting deal instead. There are a lot of options available online. Our miners software is suitable for remote management via HTTPS.

well i did not get any of these units...in a prev post even with the group order deal and 10 percent off due to prev knc purchases...at 440 usd coin
47% difficulty and 15c kwh elec and the 'hopeful' 6.5Th it essentially broke even...ie I'd get the same coin if I bought vs what I'd get out...not to
mention at 2500 watts likely would have to kick up the 100 amp service in the house to 200 amp..er again this would have been at a $4495 usd price
including shipping

my point is thou it is interesting ..that their hosting of equip is more or less exactly what I would pay (from what i can figure) in Minnesota...

electricity to run the beastie

so anyway if there is a way in the future to justify getting one of these beasts vs just getting coin I will consider it...likely it would have to be

another 'group order' which I've seen none mentioned....

anyway....hosting my equip looks like maybe a wash either way.....same $$$ assuming my 100amp could take 1 2500w 24/7..heh

(er cooling crap i forgot cooling)

still fence sitting but interested

Searing

lol another MN miner , i wish it was still winter...
I'm thinking of hosting an sp30 in my basement, seems cool right now , problem is I have to figure out where to put my GPU farm as well

s1gs3gv

legendary

Activity: 1316

Merit: 1014

ex uno plures

Did I hear somebody say EXPONENTIAL GROWTH ?

ShadesOfMarble

donator

Activity: 543

Merit: 500

It is impressive but it's a linear scale which always looks impressive if you plot exponential growth Cheesy

http://bitcoin.sipa.be/speed-ever.png

This carries much more information and is no less impressive. (Straight line with exponential axis = exponential growth)

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 639. (Read 1260389 times)