Pages:
Author

Topic: [CLOSED]***Spondoolies Tech SP10 - 1.4-1.45Th/s - $2,795 + shipping*** (Read 32349 times)

sr. member
Activity: 672
Merit: 250
Most Advanced Crypto Exchange on the Blockchain
Finally got mine into the co-hosting rack this week.  REALLY happy to have these back up and out
of my bedroom!!!
This way I was able to push the fans up to 90% as well.
I never got any notes from the server farm operators yet like another guy here about being the loudest
device ever.

They charged me $225 a month and $225 setup fee for them.  MUCH cheaper than my .35C per KWh power
in Japan.
Come July / August I will have my SP30 there as well at another $225 a month so Im happy with their price
and service.  They even figured out how to do an emergency recovery with the SD-Card I sent after a small
problem with the static IP settings after a move to 220V rack space.








Im getting between 22 and 25 degree air.  Was hoping for 18 to 20 degree but they are running well so far.
Both SP10s are above 1.4GH/s with the latest firmware and custom settings from
Zvisha.  Im SOO impressed with the staff at SP-Tech.  Always improving and helping us.

sr. member
Activity: 434
Merit: 250
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?

Yes but everyone loves Road Smiley

Murdof, your sig is fabulous, please keep posting all over the forum, clicking that link saves me from having to visit my mother (my SP10's are in her garage!)  Cheesy

The best place for this machine is in your mother-in-law house.

I call her the monster-in-law.  Cheesy
hero member
Activity: 784
Merit: 1000
Live Stars - Adult Streaming Platform
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?

Yes but everyone loves Road Smiley

Murdof, your sig is fabulous, please keep posting all over the forum, clicking that link saves me from having to visit my mother (my SP10's are in her garage!)  Cheesy

The best place for this machine is in your mother-in-law house.
full member
Activity: 196
Merit: 100
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?

Yes but everyone loves Road Smiley

Murdof, your sig is fabulous, please keep posting all over the forum, clicking that link saves me from having to visit my mother (my SP10's are in her garage!)  Cheesy

Don't you love the part with the air blowing in the mic? :p
sr. member
Activity: 434
Merit: 250
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?

Yes but everyone loves Road Smiley

Murdof, your sig is fabulous, please keep posting all over the forum, clicking that link saves me from having to visit my mother (my SP10's are in her garage!)  Cheesy
full member
Activity: 196
Merit: 100
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?

Yes but everyone loves Road Smiley
hero member
Activity: 630
Merit: 500
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
you do know that anyone can open a thread right?
full member
Activity: 196
Merit: 100
I think Road should open up a new thread where people will post their voltage, overclock settings and THs they get.

That way we might find faster the most efficient settings for 240V/110V
legendary
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
jpass022, have you worked with the SP-Tech guys to tweak your settings?  I don't know enough about the settings to recommend something to you.  I used the settings that Zvi put on the tech blog on spondoolies site and played around to get where I am now.  By increasing my max voltage to 0.75 - which I did after sending that initial screenshot, I am now getting about 1.34TH/s, so a bit of an increase there.

As you can see, I'm still playing around with settings to try to find the best values for my setup Smiley

As you increase the voltage your efficiency drops. I wonder what you are pulling at the wall to get your hashrate, I'm sure it is higher than the .7 figure  that Roadstress uses.
If I set it to the "slow fans, medium rate" settings, I get a pretty rock solid 1.23TH/s at just about 915 watts (I don't have a Kill-a-Watt or any other meter, so I'm relying on the ASIC stats page here).  Increasing my voltage to get the 1.34TH/s pushes me up to 1100 watts (again based on the ASICS stats page).  Also, the hash rate fluctuates from 1.28TH/s - 1.34TH/s, so it's not as consistent.

RoadStress' numbers are based upon setting up the voltages to get you a 1TH/s hash rate to get the 700W.  I believe those numbers are certainly achievable based on the efficiency I'm seeing, but I don't have the proper voltage settings to test it out.

Also, I'm on US residential power at 120V, so I'm capped at 1100W from the PSU.
hero member
Activity: 728
Merit: 500
jpass022, have you worked with the SP-Tech guys to tweak your settings?  I don't know enough about the settings to recommend something to you.  I used the settings that Zvi put on the tech blog on spondoolies site and played around to get where I am now.  By increasing my max voltage to 0.75 - which I did after sending that initial screenshot, I am now getting about 1.34TH/s, so a bit of an increase there.

As you can see, I'm still playing around with settings to try to find the best values for my setup Smiley

As you increase the voltage your efficiency drops. I wonder what you are pulling at the wall to get your hashrate, I'm sure it is higher than the .7 figure  that Roadstress uses.
sr. member
Activity: 434
Merit: 250

All in stock SP10 were ordered.
Next production run is mid June.

If there will be cancellation or non paying, we'll open "immediate delivery" stock.

Closing this GB since items are out of stock! Thank you everyone!.


Donations:
Quote





When are you starting the new GB for the June batch? Come up with a good price man!

June batch is already a good price  Wink
full member
Activity: 346
Merit: 100

All in stock SP10 were ordered.
Next production run is mid June.

If there will be cancellation or non paying, we'll open "immediate delivery" stock.

Closing this GB since items are out of stock! Thank you everyone!.


Donations:
Quote





When are you starting the new GB for the June batch? Come up with a good price man!
legendary
Activity: 1253
Merit: 1203
thanks for posting screen shots of your guys' settings. Im up to 1.33TH/s on both and pretty happy with that, considering im running about 35 degrees in the front.
legendary
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
jpass022, have you worked with the SP-Tech guys to tweak your settings?  I don't know enough about the settings to recommend something to you.  I used the settings that Zvi put on the tech blog on spondoolies site and played around to get where I am now.  By increasing my max voltage to 0.75 - which I did after sending that initial screenshot, I am now getting about 1.34TH/s, so a bit of an increase there.

As you can see, I'm still playing around with settings to try to find the best values for my setup Smiley
member
Activity: 65
Merit: 10
I ran mine with 120V and 15A plugins for a week while I was waiting for my 208V 30A plugins installed.. not much changed since I plugged them in to the 208.
My first machine gets close to 1.32TH/s while my second machine has been near 1.18TH/s with slight jumps into the 1.2's every once in awhile.
 
What are you guys' settings that are getting close to 1.4TH/s? I'm usually running about 30 degrees in the front so I'm fine losing a little bit of hash power.. but the 1.18 could definitely use some tweaking.

Here are the settings I use:

Gets me solid 1.32TH/s at 22C/75C

Here are the settings I'm using...


legendary
Activity: 1904
Merit: 1007

All in stock SP10 were ordered.
Next production run is mid June.

If there will be cancellation or non paying, we'll open "immediate delivery" stock.

Closing this GB since items are out of stock! Thank you everyone!.


Donations:
Quote

Minepeon's donation address is 12Ui8w9q6eq6TxZmow8H9VHbZdfEnsLDsB see http://minepeon.com/index.php/Donate

Thank you!

https://blockchain.info/tx/0c2b1669b756db5e91feadc816e37100325e36f3a4f01b67139cd4c25dfd5bf7
sr. member
Activity: 420
Merit: 250

All in stock SP10 were ordered.
Next production run is mid June.

If there will be cancellation or non paying, we'll open "immediate delivery" stock.

Closing this GB since items are out of stock! Thank you everyone!.


Donations:
Quote




Minepeon's donation address is 12Ui8w9q6eq6TxZmow8H9VHbZdfEnsLDsB see http://minepeon.com/index.php/Donate
legendary
Activity: 1904
Merit: 1007

All in stock SP10 were ordered.
Next production run is mid June.

If there will be cancellation or non paying, we'll open "immediate delivery" stock.

Closing this GB since items are out of stock! Thank you everyone!.


Donations:
Quote


legendary
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
I ran mine with 120V and 15A plugins for a week while I was waiting for my 208V 30A plugins installed.. not much changed since I plugged them in to the 208.
My first machine gets close to 1.32TH/s while my second machine has been near 1.18TH/s with slight jumps into the 1.2's every once in awhile.
 
What are you guys' settings that are getting close to 1.4TH/s? I'm usually running about 30 degrees in the front so I'm fine losing a little bit of hash power.. but the 1.18 could definitely use some tweaking.

Here are the settings I use:

Gets me solid 1.32TH/s at 22C/75C
legendary
Activity: 1904
Merit: 1007
Do you know the tax/duty on imports to germany ?

best regards

Hektek

No idea. Usually computers are tax free, but you have to pay VAT.

You have updated the speed to 1.4-1.45 Thash. Is the June batch going to consist of faster ASICS? I have yet to break 1.35 with my SP10 even with 18 degree intake temps.

Always take specs with +-10%. Being on 110V will always bring you less hashrate when dealing with SP10. The miner is able to hash with 1.4-1.45Th/s, but with proper power (220V). If you really miss the hashrate then just colocate the miner. https://bitcointalksearch.org/topic/hw-hosting-directory-reputation-622998 plenty to choose from


@teeGUMES drop an e-mail to support@ and they will help you.
Pages:
Jump to: