[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 65.

bomberb17

hero member

Activity: 773

Merit: 528

Ok so I am thinking of building a custom rack, something like this below.
Back side in the picture (not shown) would be open for the intake side (without metal/plexiglass door). Front side would have a large, quiet 220mm 600rpm fan to exhaust heat. The noisy high-rpm exhast fans would be just behind the 220mm fan, and the whole box will contain acoustic foam (something like this )
I hope this works without becoming too hot.
Also another problem is how to draw the 12V required for the fan from the SP30 PSUs (they don't have a molex connector).
What do you think?

bomberb17

hero member

Activity: 773

Merit: 528

Check this as well
https://computerservercabinet.wordpress.com/2014/09/19/soundproof-server-cabinet-advice-advice-and-helpi-hoped-to-locate-some-advice-recommendations-and-even-hints-at-deciding-on-a-good-soundproof-server-rack/

bomberb17

hero member

Activity: 773

Merit: 528

I would imagine something like putting it into a larger wooden box using these http://www.coolerguys.com/840556090359.html

mavericklm

hero member

Activity: 742

Merit: 500

Quote from: bomberb17 on September 10, 2015, 03:30:27 PM

Is there a way to make the SP30 more silent? (apart from underclocking/setting fans at lower speed).
Something like putting it in a sound-proof box or something..?

duct several more silent fans thru it!?

at 3th i find it silent, if ambient is not very high

bomberb17

hero member

Activity: 773

Merit: 528

Is there a way to make the SP30 more silent? (apart from underclocking/setting fans at lower speed).
Something like putting it in a sound-proof box or something..?

Tigggger

legendary

Activity: 1098

Merit: 1000

Quote from: Sine(X) on September 07, 2015, 02:34:45 PM

Do you have some links about KNC 16nm miners? As far I know TSMC have not produced these chips for bitcoin miners yet. KNC are talking about these chips since the end of 2014, but it's just PR.
To my mind KNC has upgraded their 28nm miners like Bitmain, but I don't have any proofs & links.

Only from KNC themselves

http://www.kncminer.com/blog/newsarchive#changing-the-game-again

https://twitter.com/kncminer/status/640519559431233536

Sine(X)

member

Activity: 118

Merit: 10

Quote from: Searing on September 07, 2015, 04:07:26 AM

Quote from: Sine(X) on September 07, 2015, 03:43:00 AM

Quote from: Xian01 on September 05, 2015, 01:14:47 AM

Quote from: thedreamer on September 04, 2015, 11:57:52 PM

but looks liek I have ot settle for some Antminer S7's instead. Undecided

No, you don't have to settle for an S7. Do the math. You are unlikely to ROI before the block halving. Better off buying BTC and hodling while it's 1BTC < $250 USD, IMO.

+1

Bitmain and some customers calculate ROI with suggestion the difficulty will not change Huh

https://bitcoinwisdom.com/bitcoin/difficulty

heh with the current difficulty rise likely due to KNC bringing up its 16nm chip run for their large world class data hall in iceland and bitfury going to do the same in probably
2-3 months in that they've taped out their 16nm stuff...this 5% diff rise could be a pretty good constant for the next 4-6 months ....trying not to be dramatic ..but it
kinda looks ugly if my guess above is right Sad

Do you have some links about KNC 16nm miners? As far I know TSMC have not produced these chips for bitcoin miners yet. KNC are talking about these chips since the end of 2014, but it's just PR.
To my mind KNC has upgraded their 28nm miners like Bitmain, but I don't have any proofs & links.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Searing on September 07, 2015, 04:07:26 AM

Quote from: Sine(X) on September 07, 2015, 03:43:00 AM

Quote from: Xian01 on September 05, 2015, 01:14:47 AM

Quote from: thedreamer on September 04, 2015, 11:57:52 PM

but looks liek I have ot settle for some Antminer S7's instead. Undecided

No, you don't have to settle for an S7. Do the math. You are unlikely to ROI before the block halving. Better off buying BTC and hodling while it's 1BTC < $250 USD, IMO.

+1

Bitmain and some customers calculate ROI with suggestion the difficulty will not change Huh

https://bitcoinwisdom.com/bitcoin/difficulty

heh with the current difficulty rise likely due to KNC bringing up its 16nm chip run for their large world class data hall in iceland and bitfury going to do the same in probably
2-3 months in that they've taped out their 16nm stuff...this 5% diff rise could be a pretty good constant for the next 4-6 months ....trying not to be dramatic ..but it
kinda looks ugly if my guess above is right Sad

The ones that calculate with no change are dreaming. Some claim when new gear goes online old gear is going offline. But I have found old gear normally does not go offline but to a cheaper electricity area.

This week I think a min of 5. But guess we will see. We are going to have a few pumping out gear though.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Sine(X) on September 07, 2015, 03:43:00 AM

Quote from: Xian01 on September 05, 2015, 01:14:47 AM

Quote from: thedreamer on September 04, 2015, 11:57:52 PM

but looks liek I have ot settle for some Antminer S7's instead. Undecided

No, you don't have to settle for an S7. Do the math. You are unlikely to ROI before the block halving. Better off buying BTC and hodling while it's 1BTC < $250 USD, IMO.

+1

Bitmain and some customers calculate ROI with suggestion the difficulty will not change Huh

https://bitcoinwisdom.com/bitcoin/difficulty

heh with the current difficulty rise likely due to KNC bringing up its 16nm chip run for their large world class data hall in iceland and bitfury going to do the same in probably
2-3 months in that they've taped out their 16nm stuff...this 5% diff rise could be a pretty good constant for the next 4-6 months ....trying not to be dramatic ..but it
kinda looks ugly if my guess above is right Sad

Sine(X)

member

Activity: 118

Merit: 10

Quote from: Xian01 on September 05, 2015, 01:14:47 AM

Quote from: thedreamer on September 04, 2015, 11:57:52 PM

but looks liek I have ot settle for some Antminer S7's instead. Undecided

No, you don't have to settle for an S7. Do the math. You are unlikely to ROI before the block halving. Better off buying BTC and hodling while it's 1BTC < $250 USD, IMO.

+1

Bitmain and some customers calculate ROI with suggestion the difficulty will not change Huh

https://bitcoinwisdom.com/bitcoin/difficulty

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: thedreamer on September 04, 2015, 11:57:52 PM

but looks liek I have ot settle for some Antminer S7's instead. Undecided

No, you don't have to settle for an S7. Do the math. You are unlikely to ROI before the block halving. Better off buying BTC and hodling while it's 1BTC < $250 USD, IMO.

thedreamer

legendary

Activity: 1694

Merit: 1002

Go Big or Go Home.....

Too bad there is no info 'leaking'. I know I'd rather buy an SP based miner for the next gen wars coming up, but looks liek I have ot settle for some Antminer S7's instead. Undecided

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: TuffToad on September 04, 2015, 09:57:33 AM

Thank you SP.

For those not familiar with the word "EDGARizer" it refers to Electronic Data Gathering, Analysis and Retrieval a online public accessible database set up by the US SEC (United States Securities Exchange Commission) set up by the The Office of Compliance Inspections and Examinations ("OCIE") to protect investors & future investors through administering the SEC's nationwide examination and inspection that all parties have equal access to information provided by any party related to a "Public Companies" activity.

This was unexpected.

padrino

legendary

Activity: 1428

Merit: 1000

https://www.bitworks.io

Quote from: notlist3d on September 03, 2015, 11:54:04 AM

Quote from: padrino on September 02, 2015, 06:00:33 PM

Quote from: Tupsu on September 02, 2015, 02:54:35 PM

Quote from: padrino on September 02, 2015, 02:06:17 PM

What's laughable is all of the comments on them becoming KNC like with a one sided post from someone regularly bashed on the forms for having shit integrity. I am very interested in what Spondoolies has to say and am keeping an open mind given the circumstances..

If you really are open mind, then you can understand, that home miners is no longer needed from Spondoolies.

And in this fight, I'm in dogies side.
Although I does not like him at all, he is currently right.

Oops, we can not sell miners anymore, is no excuse for not complying the given promises.

I think we are talking about separate things here, you are somehow linking Spondoolies decision to offer, or not offer home miners to the fact that dogie may or may not have a claim.. About as relevant to this post as your hair color is...

To dogie's point about Spondoolies being online every day, wondering why they haven't spoken up and first thought that comes to mind is that they may be pursuing legal action against him, that is one prime reason to go silent.

We may have only heard half of the story. But what would they be going after Dogie on legal action?

Don't think we have heard that side of story unless I missed something.

That was more or less my point, we only heard one side so I continued with some conjecture..

Biodom

legendary

Activity: 3892

Merit: 4331

Few points:

1. I'd like to say that every time someone at Spondoolies said something to me, they always delivered on that promise. Errors could be made, but I NEVER seen any ill intent whatsoever. Quite to the the contrary, they were very helpful.

2. Their equipment is/was top notch.

3. it is a little sad that they were not able to raise capital to go on their own and instead pursued this reverse merger into BTCS. I am not privy to any details, but i don't think that apart from deploying Spond machines, BTCS has any substantial revenue streams.

luki19994

member

Activity: 99

Merit: 10

So what i want to say is that i don't trust sp-tech since Last year , they make a Statement what was not true.

luki19994

member

Activity: 99

Merit: 10

And then sp tech told me many customers can not reach minersource , but that is not our Problem.

luki19994

member

Activity: 99

Merit: 10

I bought an sp 31 from sp tech
Hosing they recommended minersource !!
Minersource = fuck up

luki19994

member

Activity: 99

Merit: 10

Hi sp tech
Why you need so a Long Time to answer dogie ?

Ski72

member

Activity: 84

Merit: 10

Kinex - The New Frontier

If anyone is interested, I have an SP20 ASIC board available for sale. Message me if so inclined.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 65. (Read 1260223 times)