[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 707.

Zelek Uther

hero member

Activity: 700

Merit: 504

Run a Bitcoin node.

Quote from: Guy Corem on March 25, 2014, 03:02:14 AM

Question to the community:
For SP30 it's too late (we're too deep into the design) but for future miners, is LCD with Hashrate / Temperature / IP / other status desirable ?
If so, what data to display ?

Network triggerable "identify unit" LED
Power LED
Status LED: Green = mining, Red = not mining

If LCD screen is implemented then:
IP address
Temperature
Hashrate

Anddos

sr. member

Activity: 378

Merit: 250

Cant believe people are bitching over the safety of the way there tools are placed,wtf is that all about
This company could become number 1 in the asic market,the potential is there..

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: SyRenity on March 25, 2014, 06:18:13 PM

Quote from: wanna4fun on March 25, 2014, 06:14:53 PM

this offer is very insane of you guyz !

no offense, but what the heck, that can be anyone rig here

Check the other ASIC manufacturers threads (with over 1000 posts)...

I think you guys are going down the wrong road with attacks against competitors. Better to rise above it.

That said, nice deal on the SP-10

SyRenity

hero member

Activity: 756

Merit: 502

Quote from: wanna4fun on March 25, 2014, 06:14:53 PM

this offer is very insane of you guyz !

no offense, but what the heck, that can be anyone rig here

It belongs to a very specific company.

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: Guy Corem on March 25, 2014, 06:00:09 PM

There have been some rumors

Pics or it didn't happen.

Oh wait.

wanna4fun

member

Activity: 119

Merit: 100

noobie

this offer is very insane of you guyz !

no offense, but what the heck, that can be anyone rig here

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

There have been some rumors circulating that certain vendors have decided to prioritize self-mining over commitments to their customers, increasing the difficulty and lowering the ROI for everyone.

Self mining example

In light of these news we at Spondoolies-Tech have decided to launch a super-special promotion as a service to the miners community.

Starting today we are offering a special deal on the SP10 – Dawson for delivery in May. What’s so special about it? We are now offering 2 units for as low as 7,995$. That’s 2.8 TH/s, in May, of the most efficient machine in the market for only 7,995$.

Order now on http://www.spondoolies-tech.com/products/2-units-of-sp10-dawson-may-batch

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: SyRenity on March 25, 2014, 05:33:01 PM

Just curious, any chance you are actually from ORSoc? They do have offices in Göteborg, AFAIR Wink

http://www.orsoc.se/?p=379
(Technical partner of KNC)
Pathetic.

BitchImightbe

member

Activity: 119

Merit: 10

Quote from: Guy Corem on March 25, 2014, 05:27:49 PM

Quote from: BitchImightbe on March 25, 2014, 05:25:05 PM

KnC got their HQ in Stockholm. Gothenburg is on the other side of the country, but yeah, i live in Sweden and KnC is a Swedish company.
I don´t mean to be rude, i like your products but you claim to be pro´s and then post pictures who´s out of question not up to any ESD safety standard.
As i wrote before, if you need help just shoot me a PM

(I can even go to Israel if you need a pro Wink

)

Paid Trollizm ?
KNC should take care of their thread first. Such a mess...

No, just educated and experienced professional in ESD safety Roll Eyes

If you don´t believe me, just google ESD safety then....

SyRenity: No connection, what so ever to KNC or ORSoc. I work at Apple Grin

Hey guys, seriously, i´m trying to help you out.... and you claim that i´m working for KnC/ORSoc and trying to ruin your thread.
I´m just worried since you posted the pictures with your assembly line. Undecided

SyRenity

hero member

Activity: 756

Merit: 502

Quote from: BitchImightbe on March 25, 2014, 05:25:05 PM

KnC got their HQ in Stockholm. Gothenburg is on the other side of the country, but yeah, i live in Sweden and KnC is a Swedish company.
I don´t mean to be rude, i like your products but you claim to be pro´s and then post pictures who´s out of question not up to any ESD safety standard (Remember your assembly line handle very delicate components and they should do it in a correct way, not sloppy).

Just curious, any chance you are actually from ORSoc? They do have offices in Göteborg, AFAIR Wink

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: BitchImightbe on March 25, 2014, 05:25:05 PM

KnC got their HQ in Stockholm. Gothenburg is on the other side of the country, but yeah, i live in Sweden and KnC is a Swedish company.
I don´t mean to be rude, i like your products but you claim to be pro´s and then post pictures who´s out of question not up to any ESD safety standard.
As i wrote before, if you need help just shoot me a PM

(I can even go to Israel if you need a pro Wink

)

Paid Trollizm ?
KNC should take care of their thread first. Such a mess...

BitchImightbe

member

Activity: 119

Merit: 10

Quote from: Guy Corem on March 25, 2014, 05:20:42 PM

Quote from: BitchImightbe on March 25, 2014, 05:18:31 PM

Quote from: Guy Corem on March 25, 2014, 05:13:00 PM

Quote from: BitchImightbe on March 25, 2014, 05:03:52 PM

Spondoolies-Tech: What the... you claimed to be pro´s with years of experience... why the extremely lousy ESD safety? Really, it´s embarrassing to see.

Noted. We'll check with our CM, Flextronics Israel.
Note: All the units are being tested in Flex before transporting for one day burn-in tests in our data center.

Please do so, ESD damage is very serious stuff and will cause hefty RMA cost for you as a producer. That pictures look, to be honest, like a real mess. Remember, ESD damages may not cause components to fail directly, it takes a while.

I work at a Apple service store and is responsible for the ESD precautions standard in my country so if you guys need some advice shoot me a PM

BitchImightbe, registered 4 days ago, address is Götheborg Sweden. KNC I presume ?
Nice to meet

KnC got their HQ in Stockholm. Gothenburg is on the other side of the country, but yeah, i live in Sweden and KnC is a Swedish company.
I don´t mean to be rude, i like your products but you claim to be pro´s and then post pictures who´s out of question not up to any ESD safety standard (Remember your assembly line handle very delicate components and they should do it in a correct way, not sloppy).
As i wrote before, if you need help just shoot me a PM

(I can even go to Israel if you need a pro Wink

)

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: BitchImightbe on March 25, 2014, 05:18:31 PM

Quote from: Guy Corem on March 25, 2014, 05:13:00 PM

Quote from: BitchImightbe on March 25, 2014, 05:03:52 PM

Spondoolies-Tech: What the... you claimed to be pro´s with years of experience... why the extremely lousy ESD safety? Really, it´s embarrassing to see.

Noted. We'll check with our CM, Flextronics Israel.
Note: All the units are being tested in Flex before transporting for one day burn-in tests in our data center.

Please do so, ESD damage is very serious stuff and will cause hefty RMA cost for you as a producer. That pictures look, to be honest, like a real mess. Remember, ESD damages may not cause components to fail directly, it takes a while.

I work at a Apple service store and is responsible for the ESD precautions standard in my country so if you guys need some advice shoot me a PM

BitchImightbe, registered 4 days ago, address is Götheborg Sweden. KNC I presume ?
Nice to meet

BitchImightbe

member

Activity: 119

Merit: 10

Quote from: Guy Corem on March 25, 2014, 05:13:00 PM

Quote from: BitchImightbe on March 25, 2014, 05:03:52 PM

Spondoolies-Tech: What the... you claimed to be pro´s with years of experience... why the extremely lousy ESD safety? Really, it´s embarrassing to see.

Noted. We'll check with our CM, Flextronics Israel.
Note: All the units are being tested in Flex before transporting for one day burn-in tests in our data center.

Please do so, ESD damage is very serious stuff and will cause hefty RMA cost for you as a producer. That pictures look, to be honest, like a real mess. Remember, ESD damages may not cause components to fail directly, it takes a while.

I work at a Apple service store and is responsible for the ESD precautions standard in my country so if you guys need some advice shoot me a PM

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: BitchImightbe on March 25, 2014, 05:03:52 PM

Spondoolies-Tech: What the... you claimed to be pro´s with years of experience... why the extremely lousy ESD safety? Really, it´s embarrassing to see.

Noted. We'll check with our CM, Flextronics Israel.
Note: All the units are being tested in Flex before transporting for one day burn-in tests in our data center.

BitchImightbe

member

Activity: 119

Merit: 10

Quote from: ?? on ??

Quote from: raskul on March 25, 2014, 02:53:53 PM

Quote from: RoadStress on March 25, 2014, 02:42:58 PM

Quote from: TooDumbForBitcoin on March 25, 2014, 02:21:32 PM

If that guy is trying to keep hairs out of the electronics, he's gonna need a bigger hat.

Please don't make quotes so big. Thank you.

i enjoyed seeing the pictures twice.

Lol, me too.

I noticed that you don't use conductive tabletops, antistatic straps, antistatic gloves or hairnets ... hate to see a unit die from drooling on a board and then testing it.

It doesn't take much static to fry a chip, and then the whole unit is fried prob.

They got ESD carpet and ESD coats. (The assembly people isn´t even wearing ESD straps on some pics)
The assembly line is no way near to be ESD safe. Look at the pictures, they have stashed metal tools on the benches etc! (Properly ESD safety = Tools on separate shelve and for fucks sake ABSOLUTELY NO COMPUTERS/SCREENS/ANYTHING ELECTRICAL PLUGGED IN on the work benches)

Spondoolies-Tech: What the... you claimed to be pro´s with years of experience... why the extremely lousy ESD safety? Really, it´s embarrassing to see.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: thomashrev89 on March 25, 2014, 03:55:32 PM

Amazing! You are very fast becoming one of my favorit ASIC manufacture. keep it up.

Thanks thomashrev89. Stay tuned, we're only getting started.

thomashrev89

full member

Activity: 190

Merit: 100

Quote from: Guy Corem on March 25, 2014, 02:12:46 PM

Quote from: thomashrev89 on March 25, 2014, 01:46:14 PM

Thread said "starting shipping in 7 days" It has now been 7 days. Hope you are still on track.

We are very happy to announce that the first units have rolled off the assembly line today! The units are now on their way to the burn-in tests.

Our COO, the amazing mr. Kobi Levin has taken a few photos of the assembly line. We wanted to share our excitement with you.

Congratulations to those who were quick and ordered first. We hope you enjoy the early access batch!

Amazing! You are very fast becoming one of my favorit ASIC manufacture. keep it up.

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: ?? on ??

I noticed that you don't use conductive tabletops, antistatic straps

The picture of the guy with the "hat" shows an antistatic strap connected to the tabletop. Lower right.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: RoadStress on March 25, 2014, 02:42:58 PM

Quote from: TooDumbForBitcoin on March 25, 2014, 02:21:32 PM

If that guy is trying to keep hairs out of the electronics, he's gonna need a bigger hat.

Please don't make quotes so big. Thank you.

i enjoyed seeing the pictures twice.

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 707. (Read 1260290 times)