[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 83.

xZork

hero member

Activity: 1249

Merit: 506

Quote from: dropt on May 14, 2015, 12:54:19 AM

Quote from: xZork on May 14, 2015, 12:39:13 AM

As many suppliers as there is today for just about anything you wouldn't think it would be that much trouble. However it seems that it is so application specific there is no need for anyone to supply it to the public. I wasn't planing on salvaging anything to get a fix, and the time to do it all.

Anyway, I do appreciate the replies. It looks like I need to get more aggressive and try to clean out the melted plastic with more than a paper clip.

I believe I have some of these on hand. If you want, and I still have some, I can dig one out for you.

If you don't mind, shoot me a PM if you have one. Thanks.

I am still open for trade on this unit. 1:1 shipped in US.

dropt

legendary

Activity: 1512

Merit: 1000

Quote from: xZork on May 14, 2015, 12:39:13 AM

As many suppliers as there is today for just about anything you wouldn't think it would be that much trouble. However it seems that it is so application specific there is no need for anyone to supply it to the public. I wasn't planing on salvaging anything to get a fix, and the time to do it all.

Anyway, I do appreciate the replies. It looks like I need to get more aggressive and try to clean out the melted plastic with more than a paper clip.

I believe I have some of these on hand. If you want, and I still have some, I can dig one out for you.

xZork

hero member

Activity: 1249

Merit: 506

Quote from: quakefiend420 on May 14, 2015, 12:47:31 AM

Quote from: xZork on May 14, 2015, 12:39:13 AM

As many suppliers as there is today for just about anything you wouldn't think it would be that much trouble. However it seems that it is so application specific there is no need for anyone to supply it to the public. I wasn't planing on salvaging anything to get a fix, and the time to do it all.

Anyway, I do appreciate the replies. It looks like I need to get more aggressive and try to clean out the melted plastic with more than a paper clip.

PM me if you don't find a way to fix it and you'd like to sell it on the cheap.

Would you consider a trade?

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: xZork on May 14, 2015, 12:39:13 AM

As many suppliers as there is today for just about anything you wouldn't think it would be that much trouble. However it seems that it is so application specific there is no need for anyone to supply it to the public. I wasn't planing on salvaging anything to get a fix, and the time to do it all.

Anyway, I do appreciate the replies. It looks like I need to get more aggressive and try to clean out the melted plastic with more than a paper clip.

PM me if you don't find a way to fix it and you'd like to sell it on the cheap.

xZork

hero member

Activity: 1249

Merit: 506

As many suppliers as there is today for just about anything you wouldn't think it would be that much trouble. However it seems that it is so application specific there is no need for anyone to supply it to the public. I wasn't planing on salvaging anything to get a fix, and the time to do it all.

Anyway, I do appreciate the replies. It looks like I need to get more aggressive and try to clean out the melted plastic with more than a paper clip.

pinhead666

sr. member

Activity: 280

Merit: 253

You're right about new GPU's but there are also "old" cards which have practically no value and are thrown away.At least here where I live (Finland).

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: pinhead666 on May 13, 2015, 11:42:29 PM

Ask local computer-store or recycling centre broken gpu cards.I think they have a lot of them.

I'm not sure about that on local computer store. GPU's have a amazingly long RMA period. Most go to RMA's that are broken. I would guess most that go there get sent in for replacement.

If you had a recycle center I guess it's possible.

pinhead666

sr. member

Activity: 280

Merit: 253

Ask local computer-store or recycling centre broken gpu cards.I think they have a lot of them.

xZork

hero member

Activity: 1249

Merit: 506

Quote from: Tupsu on May 13, 2015, 07:31:13 PM

Quote from: xZork on May 13, 2015, 05:41:39 PM

Does anyone know where I could get a replacement Female PCI-E connector for an SP20?

Thanks!

Buy Antminer S2 board, and you can get them 6pc or buy some (broken) Block Erupter Cube 30-38 GH/s and get 2 pcs, only in black color.

Both are bent @ 90 Deg? I'll have to look into that. Thanks for the reply!

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: xZork on May 13, 2015, 05:41:39 PM

Does anyone know where I could get a replacement Female PCI-E connector for an SP20?

Thanks!

Buy Antminer S2 board, and you can get them 6pc or buy some (broken) Block Erupter Cube 30-38 GH/s and get 2 pcs, only in black color.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: techgeek on May 13, 2015, 05:56:15 PM

Someone made a thread recently they are on a bidding ward to buy spoondoolies?

Is this true?

or am I just reading more troll stuff, and if its true, then why would spoondoolies sell their company?

Probably just random noise and per the announcement it would appear that they've merging / been bought by another company already. As to the final legal structure Guy will have to go into that.

techgeek

hero member

Activity: 826

Merit: 1000

Someone made a thread recently they are on a bidding ward to buy spoondoolies?

Is this true?

or am I just reading more troll stuff, and if its true, then why would spoondoolies sell their company?

xZork

hero member

Activity: 1249

Merit: 506

Does anyone know where I could get a replacement Female PCI-E connector for an SP20?

Thanks!

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

Quote from: Bicknellski on May 10, 2015, 01:43:37 AM

Overmoderation again. Especially in a SELF MODDED thread. Someone doesn't want STech thread bumped but they tend to ignore that in Bitmaintech or Avalon threads that predominate this section of the forum.

what are you talking about? The hardware forum has this thread and an SP20 thread, both of which are not very busy, and with no real news out of SP-T. If you want more threads, make one front-page worthy.

TracerX

hero member

Activity: 918

Merit: 1002

Quote from: Biomech on May 13, 2015, 12:43:01 PM

Quote from: cathoderay on May 11, 2015, 08:37:34 PM

Quote from: Biomech on May 10, 2015, 01:00:37 PM

...I'm no part of the "hate on dogie" crowd.

It is not a "hate on dogie" crowd. It is an ever increasing number of forum members who have legitimate grievances. The reason you are not amongst them is probably because you have not yet:

been neg rep'd by him for having a different or correct point of view,
or been neg rep'd by one of his aliases for no reason,
or been fraudulently charged VAT by him,
or been publicly wrongfully accused of something by him,
or had your thread spammed with BS by him,
or been given false reports & bad reviews by him,
or been insulted & bullied off the forum by him,
or had your posts reported & deleted by him because he doesn't like what you say,
etc, etc.....

Spondoolies themselves have been a victim of his slurs. Don't worry - you'll soon get to be a member of this "crowd" when he gets round to you..... Wink

I doubt it. He's been nothing but cool to me in our few interactions. But anyway, I'll just leave it at that. As I said, I'm slightly positive, and overall neutral towards the man. His guides have been very helpful to me, and whether or not the above holds true, he and I have never crossed swords.

I'm going to take some time out of my afternoon to second this. Dogie has done a ton of work for this community--even if he's a dick (which I've never experienced in dealing directly with him) he's still brought a ton of value to newbs and pros alike. No one is perfect, but I don't believe the pitchforks are merited.

Biomech

legendary

Activity: 1372

Merit: 1022

Anarchy is not chaos.

Quote from: cathoderay on May 11, 2015, 08:37:34 PM

Quote from: Biomech on May 10, 2015, 01:00:37 PM

...I'm no part of the "hate on dogie" crowd.

It is not a "hate on dogie" crowd. It is an ever increasing number of forum members who have legitimate grievances. The reason you are not amongst them is probably because you have not yet:

been neg rep'd by him for having a different or correct point of view,
or been neg rep'd by one of his aliases for no reason,
or been fraudulently charged VAT by him,
or been publicly wrongfully accused of something by him,
or had your thread spammed with BS by him,
or been given false reports & bad reviews by him,
or been insulted & bullied off the forum by him,
or had your posts reported & deleted by him because he doesn't like what you say,
etc, etc.....

Spondoolies themselves have been a victim of his slurs. Don't worry - you'll soon get to be a member of this "crowd" when he gets round to you..... Wink

I doubt it. He's been nothing but cool to me in our few interactions. But anyway, I'll just leave it at that. As I said, I'm slightly positive, and overall neutral towards the man. His guides have been very helpful to me, and whether or not the above holds true, he and I have never crossed swords.

gallery2000

hero member

Activity: 784

Merit: 1000

Live Stars - Adult Streaming Platform

Hi,

I heard that Bitcoin Shop (btcs) just bought Spondoolies-Tech? I would like to start a hostile bid to take over Spondoolies. How do I do it. I will hostilely bid $10000 to take over. Would you consider it?

jtoomim

hero member

Activity: 818

Merit: 1006

Quote from: edgar on May 12, 2015, 09:00:48 PM

not only that but wouldnt Toomim Bros be the best buyer for these?

We're trying to scrape enough money together to do a 1.5 MW expansion. Our current capacity is basically full. Spending money on miners means we have less money available for expansion and less capacity for other customers.

Sorry for the thread hijack; I just replied where btcgnome made the post. Marketplace -> Goods -> Computer Hardware would definitely be the more appropriate forum.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: edgar on May 12, 2015, 09:00:48 PM

not only that but wouldnt Toomim Bros be the best buyer for these?

Spare parts etc...

That or try to sell them still there. Normally hosting centers try to sell to people who want them hosted there, that way they don't loose any hosting incomes and they don't have to ship them out.

So it is a little odd they are not trying to find buyers for them who want to keep hosting with them.

edgar

legendary

Activity: 1859

Merit: 1001

not only that but wouldnt Toomim Bros be the best buyer for these?

Spare parts etc...

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 83. (Read 1260395 times)