So this is a no go
I was thinking along the same lines
I like that too.
Topic: [ANN] SpreadCoin | Decentralize Everything (decentralized blockexplorer coming) - page 275. (Read 790391 times)
June 22, 2015, 08:02:30 AM
I was thinking along the same lines
I like that too.
June 22, 2015, 04:47:14 AM
So this is a no go
I was thinking along the same lines
June 22, 2015, 04:39:39 AM
..... while I look into basic first iteration of the servicenode concept.
I do have a few ideas...
I do have a few ideas...
The white paper is basically done. Just reading over to make corrections now (see sig if you want to comment)
Servicenode testing with Bitcoin incentives program as first service. Feature requests:
* Servicenode health check - I think this is already in the code and part of the plan, but a servicenode that is working as it should be.
* Payment mechanism to servicenodes running full bitcoin node
* Basic scripts that pull data out of full bitcoin nodes. Nothing that seeks to reveal the IP details of transactions being relayed by the bitcoin nodes: as far away from the elliptic.co model of tracking users as possible.
* Ability to skew payments to Bitcoin nodes being operated in developing countries. While we don't yet have a definition of developing countries, ability to skew payments to certain IP locations would be interesting. This is to encourage decentralization of VPS options, plus encourage people to get nodes closer to where there will be far more SPV wallets with few if any Bitcoin node peers close by.
* possibility of having 10,000 bitcoin nodes over the long term
June 21, 2015, 11:13:30 PM
So this is a no go
June 21, 2015, 10:46:00 PM
Thanks to the "scumbag" who sent me a donation to Scumbags7u2p6iZHfBTPW4r8MMch2v8a75
I knew it would attract the "right" people. I love you all you scumbags.
Highly motivating!
Hm... I wonder what would happen if I...
okok, enough with the vanity already...
I knew it would attract the "right" people. I love you all you scumbags.
Highly motivating!
Hm... I wonder what would happen if I...
okok, enough with the vanity already...
June 21, 2015, 10:39:45 PM
If there was a way to find the public key, keep the private key safely hidden (I know, near impossible), then you could sell these. Perhaps it would be an incentive for people to keep nodes up, running and 'mining'. The prospect of getting something that might have some value
Vanitypools exist, and they have found a way of dealing with this problem, so there is definitely a solution.
I'll look into it sometime in the future, but I do consider the in-wallet-vanitygen side project finished and am looking into the next steps to create a first testnet version of rudimentary basic servicenodes.
With the current preview wallet I'll just finish the open bugs (plus load/save feature of vangen worklist) and create the new versions for all systems, (I'll need your feedback guys)
then I will need to update the website (add Newssection) and create a blockexplorer,
all that while I look into basic first iteration of the servicenode concept.
I do have a few ideas...
June 21, 2015, 10:31:04 PM
Import button doesn't work.
Right click, import does work.
I fixed it, and added a small bonus feature:
it will tell you the amount of deletable and importable addresses when you do a right click.
New version (I am reusing the old link, so that newcomers will be uptodate):
http://www.spreadcoin.info/downloads/preview_wallet_0.zip
How do i import the privet key again?
Either with the right click on the address, or by activating auto-import (with unlocked wallet), or by downloading the newest version that has a working import-button:
http://www.spreadcoin.info/downloads/preview_wallet_0.zip
June 21, 2015, 09:07:17 PM
Can you guys post a few Hashrates, and what CPU you use... I am curious.
AMD Phenome II X6 1100T, one core at 179 kkey/s
June 21, 2015, 07:52:28 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I have the same problem.
Also i found a spelling mistake
"These canl be automatically"
Ouch, thanks for telling. Fixed it. Will be in the next version.
Awesome, it works brilliantly!
Do you know of any other crypto with vangen inside the wallet?
How do i import the privet key again?
June 21, 2015, 07:37:49 PM
Import button doesn't work.
Right click, import does work.
June 21, 2015, 07:20:33 PM
1 & 8 threads:
Intel Core i7 3615QM 2.3GHz, 8GB RAM, 1TB HDD
edit
I take it that the vangen search sessions clears when you start / stop the wallet?
edit edit
If there was a way to find the public key, keep the private key safely hidden (I know, near impossible), then you could sell these. Perhaps it would be an incentive for people to keep nodes up, running and 'mining'. The prospect of getting something that might have some value
Intel Core i7 3615QM 2.3GHz, 8GB RAM, 1TB HDD
edit
I take it that the vangen search sessions clears when you start / stop the wallet?
edit edit
If there was a way to find the public key, keep the private key safely hidden (I know, near impossible), then you could sell these. Perhaps it would be an incentive for people to keep nodes up, running and 'mining'. The prospect of getting something that might have some value
June 21, 2015, 07:00:40 PM
Didn't match case for this one:
edit
The one I really want will take 7 years....see you then
edit
The one I really want will take 7 years....see you then
7 years? Why is your hashrate so low?
Even with just one thread (215 Kkey/s) it takes me only about 50 days for a 50% chance of finding SUPERMAN with MatchCase activated.
EDIT: oh, you were probably talking about a completely different pattern then... I see...
Can you guys post a few Hashrates, and what CPU you use... I am curious.
June 21, 2015, 06:47:57 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
Only valid SPR characters are allowed.
The first letter can only be a capital S (since all SPR addresses need to start with an S), it will not allow you to type anything else.
The second letter also has a few restrictions, not all characters are allowed there (also SPR specific).... but after the 3./4. letter you can pretty much type whatever you want as long as it is a base58 character:
123456789abcdefghijkmnopqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ
Notice that 0 (Zero) and O (capital o) aren't allowed,
and I (capital i) and l (small L) are also not allowed.
The program will tell you the allowed characters based on the cursor position, see... the "Allowed @X:..." text to the right of the "Add patterns" button.
Awesome.
Thanks
Come to think of it, I will probably make it so that the first Letter S is always present, so that people don't need to type it themselves.
June 21, 2015, 06:45:40 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
Only valid SPR characters are allowed.
The first letter can only be a capital S (since all SPR addresses need to start with an S), it will not allow you to type anything else.
The second letter also has a few restrictions, not all characters are allowed there (also SPR specific).... but after the 3./4. letter you can pretty much type whatever you want as long as it is a base58 character:
123456789abcdefghijkmnopqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ
Notice that 0 (Zero) and O (capital o) aren't allowed,
and I (capital i) and l (small L) are also not allowed.
The program will tell you the allowed characters based on the cursor position, see... the "Allowed @X:..." text to the right of the "Add patterns" button.
Awesome.
Thanks
June 21, 2015, 06:41:30 PM
Didn't match case for this one:
edit
The one I really want will take 7 years....see you then
edit
The one I really want will take 7 years....see you then
i feel left out... :-/ wheres my linux wallet :-p
Soon, it will come soooooooon...
June 21, 2015, 06:39:02 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I have the same problem.
Also i found a spelling mistake
"These canl be automatically"
Ouch, thanks for telling. Fixed it. Will be in the next version.
June 21, 2015, 06:35:31 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
Only valid SPR characters are allowed.
The first letter can only be a capital S (since all SPR addresses need to start with an S), it will not allow you to type anything else.
The second letter also has a few restrictions, not all characters are allowed there (also SPR specific).... but after the 3./4. letter you can pretty much type whatever you want as long as it is a base58 character:
123456789abcdefghijkmnopqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ
Notice that 0 (Zero) and O (capital o) aren't allowed,
and I (capital i) and l (small L) are also not allowed.
The program will tell you the allowed characters based on the cursor position, see... the "Allowed @X:..." text to the right of the "Add patterns" button.
June 21, 2015, 06:31:54 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I have the same problem.
Also i found a spelling mistake
"These canl be automatically"
June 21, 2015, 05:57:27 PM
Ok. I am not the sharpest tool in the shed.
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
I can't input anything in the Add Pattern field under the Vanity Gen Tab.
Is there a trick to it?
June 21, 2015, 04:56:28 PM
Didn't match case for this one:
edit
The one I really want will take 7 years....see you then
edit
The one I really want will take 7 years....see you then
i feel left out... :-/ wheres my linux wallet :-p
Jump to: