Topic: [ANN] TagCoin - Multi Token Wallet and Trading Platform - page 76. (Read 301292 times)
Tag ID 14821
So, I should sell at 100, and buy at 80. And you (tag business platform) will also sell at 100 and buy at 80. What might happen is all the miners will sell to you at 80, and the merchants will buy from you at 100, unless you run out of TAG, and then the merchants buy from the miners at 100.
In any case, I think we can work out a deal where I buy some of your P35k miners outright, and I can get the rest for your proposed TAG-back arrangement.
The problem is, I don't know where to put them. I can only keep one unit at home. I have a friend who's got a server, so I can stick another there.
In any case, I think we can work out a deal where I buy some of your P35k miners outright, and I can get the rest for your proposed TAG-back arrangement.
The problem is, I don't know where to put them. I can only keep one unit at home. I have a friend who's got a server, so I can stick another there.
Installed and booted BAMT 1.2 on 8GB stick...but no networking, tried to add from right hand menu, tried to set manually via /etc/network and resolv.conf but no luck. Does BAMT need configuring of network cards?
I tested the cards, seems 1.2 needs updating of drivers, will try the v12 drivers before beta 13...
UPDATE: seems the mobo needs an update of the lan driver..
http://rumorscity.com/2013/12/14/bamt-why-gigabyte-intel-z87-chipset-could-not-connect-to-the-internet/
will try that later and see if it works..
I tested the cards, seems 1.2 needs updating of drivers, will try the v12 drivers before beta 13...
UPDATE: seems the mobo needs an update of the lan driver..
http://rumorscity.com/2013/12/14/bamt-why-gigabyte-intel-z87-chipset-could-not-connect-to-the-internet/
will try that later and see if it works..
waiting to buy...
tagbond, post back your results or if you need help. I can post up what I do to bamt if you need.
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
How are you getting intensity of 20? I can nothing over 13 to work... the hardware errors just go through the roof.
I think it has to do with your "--gpu-threads 2" setting. If you set it to 1, then you can go above intensity 13. But for the 280x, you run at 2 gpu threads. For 290x, you run with 1.
https://litecoin.info/Mining_hardware_comparison
-tb-
I need risers badly... not available for any price here.
I just brought another veggie crate miner online today... took me most of the day... this unit is abit more professional... a few less zip ties!!!
I still need to figure out how the whole TAG thing works... will be trying to get my account set-up and move some TAG to the exchange tonight.
I just brought another veggie crate miner online today... took me most of the day... this unit is abit more professional... a few less zip ties!!!
I still need to figure out how the whole TAG thing works... will be trying to get my account set-up and move some TAG to the exchange tonight.
@nmak - keep safe, need you back home in one piece so we can talk more about how we can push TAG into Africa...
@Dabs - Not going to sell rigs at a future price of PHP...that's the price I will be selling it for, not buying at..lol... but perhaps we can do a deal so you can pay me back in TAG while you mine it - ..
- Let me get BAMT working to get the cards up to 750khs.
to the miners: I have 2 GPUs per mobo, and they are close together, so one is always hotter than the other..they are on a shelving rack, so will re arrange it so there is room for a PSU connected fan to blow straight through the cards - I cannot get PCI risers here so not an option just yet to separate them - will buy some in from china, as they are about $3 and no doubt people will want them as more miners come online here in Philippines. As for the horror stories, I guess I have gone through those problems and using latest beta drivers so that's why I can't get them higher than 600 at most. High temps don't help either.
@Dabs - Not going to sell rigs at a future price of PHP...that's the price I will be selling it for, not buying at..lol... but perhaps we can do a deal so you can pay me back in TAG while you mine it - ..
- Let me get BAMT working to get the cards up to 750khs.to the miners: I have 2 GPUs per mobo, and they are close together, so one is always hotter than the other..they are on a shelving rack, so will re arrange it so there is room for a PSU connected fan to blow straight through the cards - I cannot get PCI risers here so not an option just yet to separate them - will buy some in from china, as they are about $3 and no doubt people will want them as more miners come online here in Philippines. As for the horror stories, I guess I have gone through those problems and using latest beta drivers so that's why I can't get them higher than 600 at most. High temps don't help either.
Mark, see if you can get these on the cheap: http://www.alibaba.com/product-gs/1021325751/1x_to_1X_4x_8x_16x.html. I've been eyeing this style for a few days now. I just got a regular 1x to 1x powered riser and it ended up being bad. I'll scoop up a half dozen or so of these via a tag transaction if you can get them cheap.
-Fuse
makes no sense to have the spread that slim - sell price at 100, and buy price at 80 - means that merchants can buy from 80 upwards, especially larger blocks at 100 - customers that earn TAG that want to cash in can sell them to merchants on the exchange or directly in person, probably in exchange for goods and services tho. The idea will be be to create a stable price - this was the original idea we had when first starting Tagbond, before we knew of Crypto. The idea then was to create our own centralized currency with a cap on how many there were, and then sell for a certain price, and pay back at 80% of value. So now with crypto, we can approximate that by controlling the supply at least for the Philippines market. We will see how that goes..
Okay. Hmmm... Yah, you should be selling them for 100.01, and buy them for 99.99.
I got a few TAG which I will put on your exchange for sale for 100.01 PHP, over the weekend, see if that gets things moving. I don't think anyone from here will buy, but your merchants might.
Everyone else who got TAG, you might want to do the same. (don't price it at 99, that would defeat the point, but hey, free market.)
A deal is fine with me. You have my email, let me know. (or PM).
I got a few TAG which I will put on your exchange for sale for 100.01 PHP, over the weekend, see if that gets things moving. I don't think anyone from here will buy, but your merchants might.
Everyone else who got TAG, you might want to do the same. (don't price it at 99, that would defeat the point, but hey, free market.)
A deal is fine with me. You have my email, let me know. (or PM).
@nmak - keep safe, need you back home in one piece so we can talk more about how we can push TAG into Africa...
@Dabs - Not going to sell rigs at a future price of PHP...that's the price I will be selling it for, not buying at..lol... but perhaps we can do a deal so you can pay me back in TAG while you mine it - .. - Let me get BAMT working to get the cards up to 750khs.
to the miners: I have 2 GPUs per mobo, and they are close together, so one is always hotter than the other..they are on a shelving rack, so will re arrange it so there is room for a PSU connected fan to blow straight through the cards - I cannot get PCI risers here so not an option just yet to separate them - will buy some in from china, as they are about $3 and no doubt people will want them as more miners come online here in Philippines. As for the horror stories, I guess I have gone through those problems and using latest beta drivers so that's why I can't get them higher than 600 at most. High temps don't help either.
@Dabs - Not going to sell rigs at a future price of PHP...that's the price I will be selling it for, not buying at..lol... but perhaps we can do a deal so you can pay me back in TAG while you mine it - ..
- Let me get BAMT working to get the cards up to 750khs.to the miners: I have 2 GPUs per mobo, and they are close together, so one is always hotter than the other..they are on a shelving rack, so will re arrange it so there is room for a PSU connected fan to blow straight through the cards - I cannot get PCI risers here so not an option just yet to separate them - will buy some in from china, as they are about $3 and no doubt people will want them as more miners come online here in Philippines. As for the horror stories, I guess I have gone through those problems and using latest beta drivers so that's why I can't get them higher than 600 at most. High temps don't help either.
@24kilo - regarding charges, we are dependent on the banks for the wire transfer charges - Standard Chartered charges $10 to receive and $20 to send, and we add on $5 to each. Within the Philippines, in PHP there are no charges dealing in Pesos. If we were to open a bank account in USA, that would require me creating a company there, which is not an option right now due to regulatory concerns in USA. So we are stuck with the charges for wire transfers.
Paypal have recently made positive comments about Bitcoin, so we have decided to take in up to $200 ($50, $100 and $200 payments), with a 5% fee taken off each before depositing to the Tagbond account (they charge us 4.4% plus transaction fee). For payouts we can pay out with a $5 fee. However, we can only pay out from the Paypal account as much as in there - we will display the Paypal balance publicly so people know how much is available. With our Philippines Paypal account, we cannot deposit USD from a bank, we have to depend on USD coming in from customers, so no choice on that. We would also require KYC stuff done (govt ID and utility bill, same as for wire transfers) and display a message stating that if any chargeback was to take place, the user would be permanently banned from Tagbond. We have to do this to make sure we are protected. China now has KYC regulations for people trading crypto currency, and even though we don't have it yet, I think it is not far off where exchanges in the West are also required to do the same.
We will work on other emoney systems to get money into Tagbond, but that's what we have at the moment. If anyone has better ideas let me know - it' a problem for all businesses like ours - cannot imagine what Cryptsy will have to do to satisfy banks and regulators in USA...
hey mark I had to cancel that transfer of aud450 that we agreed since I wrongly sent it in php instead. I that I will get time to resend when I got to south Sudan but am currently caught up in the coup attempt in juba. Can't wait to get back to Australia. Three days of gun fight is more then I wanted on my holiday. Been holed up in my hotel for 4 days now.using my mobile to access internet. Paypal have recently made positive comments about Bitcoin, so we have decided to take in up to $200 ($50, $100 and $200 payments), with a 5% fee taken off each before depositing to the Tagbond account (they charge us 4.4% plus transaction fee). For payouts we can pay out with a $5 fee. However, we can only pay out from the Paypal account as much as in there - we will display the Paypal balance publicly so people know how much is available. With our Philippines Paypal account, we cannot deposit USD from a bank, we have to depend on USD coming in from customers, so no choice on that. We would also require KYC stuff done (govt ID and utility bill, same as for wire transfers) and display a message stating that if any chargeback was to take place, the user would be permanently banned from Tagbond. We have to do this to make sure we are protected. China now has KYC regulations for people trading crypto currency, and even though we don't have it yet, I think it is not far off where exchanges in the West are also required to do the same.
We will work on other emoney systems to get money into Tagbond, but that's what we have at the moment. If anyone has better ideas let me know - it' a problem for all businesses like ours - cannot imagine what Cryptsy will have to do to satisfy banks and regulators in USA...
tagbond, post back your results or if you need help. I can post up what I do to bamt if you need.
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
How are you getting intensity of 20? I can nothing over 13 to work... the hardware errors just go through the roof.
It's probably OS and/or driver related. You're running 13x drivers. I heard horror stories about folks under linux trying to use those with the 79xx series cards, so I never updated BAMT from the 12x drivers. I would say to start there, go back to whatever the latest 12x drivers were.
If that doesn't fix it, I'd say it might be Windows, but that's just a maybe. I'm thinking more driver related.
I'm using BAMT 1.1 modified (a debian OS) with 12x drivers on cgminer 3.4.2/3.
tagbond, post back your results or if you need help. I can post up what I do to bamt if you need.
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
...try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers)...
How are you getting intensity of 20? I can nothing over 13 to work... the hardware errors just go through the roof.
Mark, Can I pay you 350 TAG for each rig? (350 TAG * 100 PHP = 35000 PHP).
tagbond, post back your results or if you need help. I can post up what I do to bamt if you need.
24kilo & tagbond, try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers).
I'm on cgminer 3.4.3, will try a newer version when I get a chance. Maybe tonight.
Here's a quick snapshot of the rig with the R9's. GPU0 needs to be spaced out more:
And one of several rigs using MSI 7950's, this is the the one with the normal hottest temps. GPU1 is too close to GPU0:
24kilo & tagbond, try 1080/1500 i-20 powertune-20 on the MSI 280x's, it's what I'm running. I tried variations on engine clock from 950-1100 with 1080 being about the best so far. Everytime I twiddled with memoryclock it funked out. I get some variation in the hash, I'm not sure if it's cgminer or driver related (using old 12x drivers).
I'm on cgminer 3.4.3, will try a newer version when I get a chance. Maybe tonight.
Here's a quick snapshot of the rig with the R9's. GPU0 needs to be spaced out more:
And one of several rigs using MSI 7950's, this is the the one with the normal hottest temps. GPU1 is too close to GPU0:
thanks for the info...I set cards to 1000/1500, but haven't undervolted them yet..i should be able to take them down to 1.137 - I also need to get some computer fans run from the psu to move the air off the cards...will be playing with Bamt tomorrow to see how that works..
OK, my TAG ID is my signature... not sure if I qualify for techbytes give away.
I wish I had coins to give away, but I have just hit 350 coins today. I started mining on TAGmining about the 5th or 6th block and have been pretty persistent ever since, in fact other than mining other coins to turn into TAG, I have been mining TAG and focused on TAG since its release.
I am also concerned about the slump in TAG price, is getting to close to being unprofitable to mine TAG for me. I was going to bring another miner online this week, not sure now.
Thanks!
I wish I had coins to give away, but I have just hit 350 coins today. I started mining on TAGmining about the 5th or 6th block and have been pretty persistent ever since, in fact other than mining other coins to turn into TAG, I have been mining TAG and focused on TAG since its release.
I am also concerned about the slump in TAG price, is getting to close to being unprofitable to mine TAG for me. I was going to bring another miner online this week, not sure now.
Thanks!
5 TAG sent. Four more TAG ID to get 5 TAG each... C'mon, I know you want em...
-tb-
Many thanks!!!
Going to spend the bulk of today trying to figure how the whole TAG system works... exchange, wallet, ID, etc and etc, it is huge and confusing. I want to post 50TAG to the exchange to trade or least figure how to do that.
So far I have used 4 different 280X cards...
All are running cgminer 3.6.6 with Windows 7 and AMD 13.9 or 13.11 drivers with 4GB of RAM and Intel Celeron 2.7 core on a Gigabyte GA-B75M-D3H powered by an Antec 750W True Power Classic PSU -
Sapphire Dual-X - 750Kh/s - easily with little no tweaking, like to run hot, ~80C, noisy, undervolted to 1.180 and stable at 1080/1500
Gigabyte GV-R928XOC-3GD Rev 1.0 - 725Kh/s - took some tweaking, runs cooler 76C, can be noisy if fans hit 100%, undervolted to 1.160, 1036/1500, very fussy with GPU speed
Gigabyte GV-R928XOC-3GD-GA Rev. 2.0 - 725Kh/s - pretty much identical to older card, runs about 4C cooler, undervolted to 1.160, 1036/1500, the build quality of this card is in a league of its own.
MSI Twin Frozr Gaming Series - 710Kh/s - runs the coolest, ~71C, runs the quietest, most difficult card to get to 700kh/s, very, very fussy with speeds, 1032/1500, built quality is the lowest of the 4 cards and it is the most expensive and has the least hardware level access. I will not buy any more unless it is the only card available.
My preferred card is the Dual-X since straight from the box it tears along at 750Kh/s and is the least expensive of the lot.
My favorite card is the Gigabyte Rev 2.0, runs cool and quiet and is built like a tank.
All are running cgminer 3.6.6 with Windows 7 and AMD 13.9 or 13.11 drivers with 4GB of RAM and Intel Celeron 2.7 core on a Gigabyte GA-B75M-D3H powered by an Antec 750W True Power Classic PSU -
Sapphire Dual-X - 750Kh/s - easily with little no tweaking, like to run hot, ~80C, noisy, undervolted to 1.180 and stable at 1080/1500
Gigabyte GV-R928XOC-3GD Rev 1.0 - 725Kh/s - took some tweaking, runs cooler 76C, can be noisy if fans hit 100%, undervolted to 1.160, 1036/1500, very fussy with GPU speed
Gigabyte GV-R928XOC-3GD-GA Rev. 2.0 - 725Kh/s - pretty much identical to older card, runs about 4C cooler, undervolted to 1.160, 1036/1500, the build quality of this card is in a league of its own.
MSI Twin Frozr Gaming Series - 710Kh/s - runs the coolest, ~71C, runs the quietest, most difficult card to get to 700kh/s, very, very fussy with speeds, 1032/1500, built quality is the lowest of the 4 cards and it is the most expensive and has the least hardware level access. I will not buy any more unless it is the only card available.
My preferred card is the Dual-X since straight from the box it tears along at 750Kh/s and is the least expensive of the lot.
My favorite card is the Gigabyte Rev 2.0, runs cool and quiet and is built like a tank.
OK..will try that out..spent quite a bit of time getting the xubuntu to work, so might as well do something with this..I take it you updated it manually since the current version needs latest drivers etc.. Once i Have it up and running, then I can sell individual mining rigs to people here to mine TAG (or whatever else they want, but TAG will be the primary one I will push..)
I took the bamt1.1 litecoin image, burned it to USB, and the updating I did was to cgminer, the scrypt kernel and some scripts to my liking. Didn't touch the AMD drivers, since 7950/7970 drivers work for the R9 series (270/280/290).
Out of the box bamt1.1 will run the cards, just not as fast as I'm at right now (3.4.3). I'm about to move to a newer version of cgminer to see how it does.
OK, my TAG ID is my signature... not sure if I qualify for techbytes give away.
I wish I had coins to give away, but I have just hit 350 coins today. I started mining on TAGmining about the 5th or 6th block and have been pretty persistent ever since, in fact other than mining other coins to turn into TAG, I have been mining TAG and focused on TAG since its release.
I am also concerned about the slump in TAG price, is getting to close to being unprofitable to mine TAG for me. I was going to bring another miner online this week, not sure now.
Thanks!
I wish I had coins to give away, but I have just hit 350 coins today. I started mining on TAGmining about the 5th or 6th block and have been pretty persistent ever since, in fact other than mining other coins to turn into TAG, I have been mining TAG and focused on TAG since its release.
I am also concerned about the slump in TAG price, is getting to close to being unprofitable to mine TAG for me. I was going to bring another miner online this week, not sure now.
Thanks!
5 TAG sent. Four more TAG ID to get 5 TAG each... C'mon, I know you want em...
-tb-
Jump to: