Topic: [ANN] TeamRedMiner - Optimized Win/Linux AMD GPU Miner for lyra2z and phi2 - page 11. (Read 85791 times)

Quote from: todxx on July 07, 2019, 05:08:29 AM

Team Red Miner v0.5.5 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.5

Added cuckatoo31 algo for grin.

We've added cuckatoo31 for grin mining!
Seems we might have been a bit late as asics are might already be here for the algo Sad

.

What is average hashrate on Vega 64?

SigiSinatra

newbie

Activity: 50

Merit: 0

Quote from: ku4eto on July 07, 2019, 01:42:07 AM

Quote from: ku4eto on July 07, 2019, 01:42:07 AM

Team Red Miner v0.5.5 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.5

Added cuckatoo31 algo for grin.

We've added cuckatoo31 for grin mining!
Seems we might have been a bit late as asics are might already be here for the algo Sad

.

They have been up since the coin launched.

Maybe, but the diff has jumped significantly in the last few days. A week ago our profitability would have been quite good.

Yeah...we're a bit late but you did a great job anyway.
Thank you.

todxx

member

Activity: 176

Merit: 76

Team Red Miner v0.5.5 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.5

Added cuckatoo31 algo for grin.

We've added cuckatoo31 for grin mining!
Seems we might have been a bit late as asics are might already be here for the algo Sad

.

They have been up since the coin launched.

Maybe, but the diff has jumped significantly in the last few days. A week ago our profitability would have been quite good.

ku4eto

jr. member

Activity: 194

Merit: 4

Quote from: todxx on July 05, 2019, 06:30:19 PM

Team Red Miner v0.5.5 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.5

Added cuckatoo31 algo for grin.

We've added cuckatoo31 for grin mining!
Seems we might have been a bit late as asics are might already be here for the algo Sad

.

They have been up since the coin launched.

todxx

member

Activity: 176

Merit: 76

Team Red Miner v0.5.5 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.5

Added cuckatoo31 algo for grin.

We've added cuckatoo31 for grin mining!
Seems we might have been a bit late as asics are might already be here for the algo Sad

.

joseph32

member

Activity: 418

Merit: 21

Hey Todxx & Kerney666,

thanks for the quick fix! It runs now perfect with AwesomeMiner!

dickmo

newbie

Activity: 6

Merit: 0

Quote from: dickmo on July 05, 2019, 05:48:58 PM

hey,dude

Pool xzc.f2pool.com rpc method "mining.extranonce.subscribe" timed out after 69 seconds. Reconnecting.

could you please take a look?

Please try using the --pool_no_ensub option.

Code:

2019-07-06 02:29:36] GPU 3 - MTP scratchpad rebuilt in 1.66 secs.
[2019-07-06 02:29:40] GPU 4 - MTP scratchpad rebuilt in 1.66 secs.
[2019-07-06 02:29:41] GPU 2 - MTP scratchpad rebuilt in 1.65 secs.
[2019-07-06 02:30:06] Stats Uptime: 0 days, 00:02:33
[2019-07-06 02:30:06] GPU 0 [63C, fan 91%] mtp: 2.795Mh/s, avg 2.710Mh/s, pool 894.8kh/s a:1 r:0 hw:0
[2019-07-06 02:30:06] GPU 1 [60C, fan 95%] mtp: 3.229Mh/s, avg 3.108Mh/s, pool 1.792Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:06] GPU 2 [58C, fan 95%] mtp: 2.916Mh/s, avg 2.979Mh/s, pool 1.794Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:06] GPU 3 [50C, fan 92%] mtp: 2.996Mh/s, avg 3.095Mh/s, pool 1.797Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:06] GPU 4 [57C, fan 96%] mtp: 2.946Mh/s, avg 3.001Mh/s, pool 1.799Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:06] Total mtp: 14.88Mh/s, avg 14.89Mh/s, pool 8.077Mh/s a:9 r:0 hw:0
[2019-07-06 02:30:15] Pool xzc.f2pool.com set difficulty to 1023.984375
[2019-07-06 02:30:15] Pool xzc.f2pool.com received new job. (job_id: 02000000)
[2019-07-06 02:30:36] Stats Uptime: 0 days, 00:03:03
[2019-07-06 02:30:36] GPU 0 [64C, fan 91%] mtp: 2.815Mh/s, avg 2.727Mh/s, pool 745.6kh/s a:1 r:0 hw:0
[2019-07-06 02:30:36] GPU 1 [60C, fan 95%] mtp: 3.229Mh/s, avg 3.132Mh/s, pool 1.493Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:36] GPU 2 [58C, fan 95%] mtp: 3.086Mh/s, avg 3.001Mh/s, pool 1.495Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:36] GPU 3 [51C, fan 92%] mtp: 3.229Mh/s, avg 3.121Mh/s, pool 1.496Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:36] GPU 4 [57C, fan 96%] mtp: 3.118Mh/s, avg 3.019Mh/s, pool 1.498Mh/s a:2 r:0 hw:0
[2019-07-06 02:30:36] Total mtp: 15.48Mh/s, avg 15.00Mh/s, pool 6.727Mh/s a:9 r:0 hw:0
[2019-07-06 02:31:06] Stats Uptime: 0 days, 00:03:33
[2019-07-06 02:31:06] GPU 0 [63C, fan 91%] mtp: 2.808Mh/s, avg 2.739Mh/s, pool 639.1kh/s a:1 r:0 hw:0
[2019-07-06 02:31:06] GPU 1 [60C, fan 95%] mtp: 3.163Mh/s, avg 3.134Mh/s, pool 1.279Mh/s a:2 r:0 hw:0
[2019-07-06 02:31:06] GPU 2 [58C, fan 95%] mtp: 3.085Mh/s, avg 3.012Mh/s, pool 1.281Mh/s a:2 r:0 hw:0
[2019-07-06 02:31:06] GPU 3 [51C, fan 92%] mtp: 3.229Mh/s, avg 3.135Mh/s, pool 1.282Mh/s a:2 r:0 hw:0
[2019-07-06 02:31:06] GPU 4 [57C, fan 96%] mtp: 3.089Mh/s, avg 3.027Mh/s, pool 1.283Mh/s a:2 r:0 hw:0
[2019-07-06 02:31:06] Total mtp: 15.37Mh/s, avg 15.05Mh/s, pool 5.764Mh/s a:9 r:0 hw:0

it works ,thanks
GPU0=vega56
orthers=vega64

power per card 200w

todxx

member

Activity: 176

Merit: 76

Quote from: dickmo on July 05, 2019, 05:48:58 PM

hey,dude

Pool xzc.f2pool.com rpc method "mining.extranonce.subscribe" timed out after 69 seconds. Reconnecting.

could you please take a look?

Please try using the --pool_no_ensub option.

dickmo

newbie

Activity: 6

Merit: 0

hey,dude

Pool xzc.f2pool.com rpc method "mining.extranonce.subscribe" timed out after 69 seconds. Reconnecting.

could you please take a look?

todxx

member

Activity: 176

Merit: 76

Team Red Miner v0.5.4 released

https://github.com/todxx/teamredminer/releases

Changes in v0.5.4

Fixed API bug for MTP, crashing when using Awesome Miner.
Small MTP improvements, mostly for Polaris.

A couple small fixes and improvements for mtp.

kerney666

member

Activity: 658

Merit: 86

Quote from: joseph32 on July 05, 2019, 12:25:11 AM

Quote from: joseph32 on July 05, 2019, 12:25:11 AM

Team Red Miner v0.5.3 released

Now supporting the MTP algorithm for Zcoin

As mentioned at mintpond, the miner always exits when creating the scratchpad while being ran from awesome miner. I'll get the spinning cursor for a moment and then it will exit. If I try the diagnostic mode, it runs. If I run it using the included batch file, it works there too. So I'm not sure what is up. This is on Windows 10 with A6-3500 APU and RX 470 and RX 580 cards with 18.6.1. drivers. I've been mining with sgminer-fancyl and djm34's miner for weeks before this without problems I would think the settings/hardware should be fine to at least get the miner to start. lol.

Thanks for taking the time to add MTP support!

Hal

Already made a post in Patrik's thread about that issue: https://bitcointalksearch.org/topic/m.51710602

Edit @ Kerney: You can use just the standard setup. Its the same command line. In AM it crashs, without AM it runs. Would be great if we can sort out this bug.

Ok, the AM issues should be fixed in v0.5.4, todxx will update with the new release shortly.

KL0nLutiy1

newbie

Activity: 88

Merit: 0

@kerney666, could you please add ability to mining nimiq with your miner?

peteris-apse

jr. member

Activity: 98

Merit: 1

So Polaris is taking huge benefit from memory... Vegas not so much. Polaris rig is working great, but vegas... I am still tweaking, but now i am having like weird problem with vegas where i cant get them stable. I guess i don't really understand how memory states affect core voltage. Because when i am starting to use other memory states it appears that it changes core voltage and my overclocks are not stable anymore.

kerney666

member

Activity: 658

Merit: 86

Team Red Miner v0.5.3 released

Now supporting the MTP algorithm for Zcoin

As mentioned at mintpond, the miner always exits when creating the scratchpad while being ran from awesome miner. I'll get the spinning cursor for a moment and then it will exit. If I try the diagnostic mode, it runs. If I run it using the included batch file, it works there too. So I'm not sure what is up. This is on Windows 10 with A6-3500 APU and RX 470 and RX 580 cards with 18.6.1. drivers. I've been mining with sgminer-fancyl and djm34's miner for weeks before this without problems I would think the settings/hardware should be fine to at least get the miner to start. lol.

Thanks for taking the time to add MTP support!

Hal

Already made a post in Patrik's thread about that issue: https://bitcointalksearch.org/topic/m.51710602

Edit @ Kerney: You can use just the standard setup. Its the same command line. In AM it crashs, without AM it runs. Would be great if we can sort out this bug.

+1, I dropped a note in the AM thread as well.

joseph32

member

Activity: 418

Merit: 21

Team Red Miner v0.5.3 released

Now supporting the MTP algorithm for Zcoin

As mentioned at mintpond, the miner always exits when creating the scratchpad while being ran from awesome miner. I'll get the spinning cursor for a moment and then it will exit. If I try the diagnostic mode, it runs. If I run it using the included batch file, it works there too. So I'm not sure what is up. This is on Windows 10 with A6-3500 APU and RX 470 and RX 580 cards with 18.6.1. drivers. I've been mining with sgminer-fancyl and djm34's miner for weeks before this without problems I would think the settings/hardware should be fine to at least get the miner to start. lol.

Thanks for taking the time to add MTP support!

Hal

Already made a post in Patrik's thread about that issue: https://bitcointalksearch.org/topic/m.51710602

Edit @ Kerney: You can use just the standard setup. Its the same command line. In AM it crashs, without AM it runs. Would be great if we can sort out this bug.

kerney666

member

Activity: 658

Merit: 86

Team Red Miner v0.5.3 released

Now supporting the MTP algorithm for Zcoin

As mentioned at mintpond, the miner always exits when creating the scratchpad while being ran from awesome miner. I'll get the spinning cursor for a moment and then it will exit. If I try the diagnostic mode, it runs. If I run it using the included batch file, it works there too. So I'm not sure what is up. This is on Windows 10 with A6-3500 APU and RX 470 and RX 580 cards with 18.6.1. drivers. I've been mining with sgminer-fancyl and djm34's miner for weeks before this without problems I would think the settings/hardware should be fine to at least get the miner to start. lol.

Thanks for taking the time to add MTP support!

Hal

Well that’s odd. Of course the hardware works fine if you can run it both in diagnostic mode and outside of AM

. Not sure this is our issue (but it could very well be). Have you talked to the Awesome Miner guys? I’m traveling today but will try to test as soon as I can. I don’t have a good AM setup right now though but I’ll try to sort it out.

hbouma

newbie

Activity: 22

Merit: 0