[ANN] Technobit HEX16B(Bitfury based) 16 chip board design - page 37.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: spegelius on November 20, 2013, 01:21:14 PM

Ah, it seems i need the specific git commit for the patch to work. And to run autocon, autogen etc. Retry #37...

You may go a couple of commits forward some small memleaks fixed patch will be OK I guess. Look for rejects fuzz is ok

Make sure you red the change log espesialy usbpoll stuff. In general you are OK for hex but mixing cgminer build with other miners may not be a good idea because they might not work.

spegelius

newbie

Activity: 52

Merit: 0

Quote from: loshia on November 20, 2013, 01:56:26 PM

Quote from: spegelius on November 20, 2013, 12:46:11 PM

Yeah, i downloaded the latest patch from that url for cgminer 3.8.1 source. The patch seems to go through without skipping any chunks, but configure doesn't seems to recognize --enable-hexminerb. I modified config.h and added #define USE_HEXMINERB 1 manually, now he build seems to compile more stuff.

I downloaded the windows sw, but i would need to reboot with driver signature check off to install the hex16 driver. Also i would very much like to use rpi to control the miner.

You are doing OK but start with ./autogen.sh --enable- whatever you want

Yes that was it, got it running

. Now it's mining a tad below 40GH/s on average, the 5s average goes up and down a bit. I think i'll let it run for a while and see how it work. Maybe some voltage tuning later on...

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: spegelius on November 20, 2013, 12:46:11 PM

Yeah, i downloaded the latest patch from that url for cgminer 3.8.1 source. The patch seems to go through without skipping any chunks, but configure doesn't seems to recognize --enable-hexminerb. I modified config.h and added #define USE_HEXMINERB 1 manually, now he build seems to compile more stuff.

I downloaded the windows sw, but i would need to reboot with driver signature check off to install the hex16 driver. Also i would very much like to use rpi to control the miner.

You are doing OK but start with ./autogen.sh --enable- whatever you want

Gator-hex

hero member

Activity: 490

Merit: 500

Quote from: marto74 on October 31, 2013, 11:59:23 AM

Quote from: erk on October 31, 2013, 08:03:28 AM

The shipping says 2 Euros is that applicable for Australia?

Please read carefully
This is only packing with your shipping.
To Austria shipping option is 3 day DPD road - 30 EUR

I love how people keep mixing up Australia and Austria, in the Bitcoin delivery world! Wink

spegelius

newbie

Activity: 52

Merit: 0

Ah, it seems i need the specific git commit for the patch to work. And to run autocon, autogen etc. Retry #37...

spegelius

newbie

Activity: 52

Merit: 0

Yeah, i downloaded the latest patch from that url for cgminer 3.8.1 source. The patch seems to go through without skipping any chunks, but configure doesn't seems to recognize --enable-hexminerb. I modified config.h and added #define USE_HEXMINERB 1 manually, now he build seems to compile more stuff.

I downloaded the windows sw, but i would need to reboot with driver signature check off to install the hex16 driver. Also i would very much like to use rpi to control the miner.

Gator-hex

hero member

Activity: 490

Merit: 500

Quote from: spegelius on November 20, 2013, 10:33:19 AM

Woo, courier visited today. Onto installation, need to rebuild cgminer. No Instructions with the device... configure --enable-avalon?

Quote from: spegelius on November 20, 2013, 12:31:31 PM

I seem to be stuck, cannot compile cgminer which would recognise the device... applied the latest cgminer patch for 3.8.1, but configuring with --enable-hexminerb doesn't do anything. Even edited cgminer.c to include hexminerb stuff but no dice...

Did you try the download page for the latest patches from the Technobit page?
http://technobit.eu/index.php?id_product=53&controller=product&id_lang=1#

Also take a look at this YouTube tutorial, for a different hex miner, but it might help.. they use a proxy for windows and USB serial port emulation.
http://youtu.be/l9SgoVm16Sw?t=3m34s

I personally went the extra 37euro for the TL-MR3020 router with preloaded CGminer /dd-wrt as a low power host for the HEX16 boards
http://technobit.eu/index.php?id_product=37&controller=product&id_lang=1

spegelius

newbie

Activity: 52

Merit: 0

I seem to be stuck, cannot compile cgminer which would recognise the device... applied the latest cgminer patch for 3.8.1, but configuring with --enable-hexminerb doesn't do anything. Even edited cgminer.c to include hexminerb stuff but no dice...

marto74

hero member

Activity: 728

Merit: 500

Quote from: Gator-hex on November 19, 2013, 10:00:13 PM

Some feedback..

The window of opportunity is closing on 55nm. You gotta build this ASAP! I have a pending order. Wink

Quote from: marto74 on November 18, 2013, 08:55:09 AM

Quote from: asyring on November 18, 2013, 08:49:26 AM

Is this board with or without chips?
The question is not answered yet.

with chips

Remove those two messages saying..
"Shipment up to 4 weeks after reciept chips"
"Shipment up to 4 weeks after reciept of your chips"
It's got to be confusing buyers into thinking they got to send chips and hurting your sales!

Your 2euro packing fee is also going to confuse people into thinking it's a delivery service.
Just add 2 euro to the final price. Everything's going to get boxed anyway?

Add the Bitpay logo near the PayPal/CC logos so people know they can buy with Bitcoins before going through the ordering process!

Don't e-mail people their password! LOL, or at least obscure it! The NSA knows it now! Shocked

10x for the input

spegelius

newbie

Activity: 52

Merit: 0

Woo, courier visited today. Onto installation, need to rebuild cgminer. No Instructions with the device... configure --enable-avalon?

Gator-hex

hero member

Activity: 490

Merit: 500

Some feedback..

The window of opportunity is closing on 55nm. You gotta build this ASAP! I have a pending order. Wink

Quote from: marto74 on November 18, 2013, 08:55:09 AM

Quote from: asyring on November 18, 2013, 08:49:26 AM

Is this board with or without chips?
The question is not answered yet.

with chips

Remove those two messages saying..
"Shipment up to 4 weeks after reciept chips"
"Shipment up to 4 weeks after reciept of your chips"
It's got to be confusing buyers into thinking they got to send chips and hurting your sales!

Your 2euro packing fee is also going to confuse people into thinking it's a delivery service.
Just add 2 euro to the final price. Everything's going to get boxed anyway?

Add the Bitpay logo near the PayPal/CC logos so people know they can buy with Bitcoins before going through the ordering process!

Don't e-mail people their password! LOL, or at least obscure it! The NSA knows it now! Shocked

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Any update on my 1/2 NOV? order ID 291. We have 3/4 NOV.....

Tracking Number?

spegelius

newbie

Activity: 52

Merit: 0

Quote from: Digi128pci on November 18, 2013, 03:28:46 PM

Quote from: spegelius on November 18, 2013, 12:48:05 PM

Hrmm, is the tracking number on the account page supposed to work? DPD can't find such tracking code...

Speedy.bg ...

Sigh, so much for the Express delivery. The one (and propably the last) time i opt for one... Roll Eyes

.

Edit: still, it's only second work day after it has been dispatched so i guess i should be more patient...

Digi128pci

newbie

Activity: 55

Merit: 0

Quote from: spegelius on November 18, 2013, 12:48:05 PM

Hrmm, is the tracking number on the account page supposed to work? DPD can't find such tracking code...

Speedy.bg ...

spegelius

newbie

Activity: 52

Merit: 0

Hrmm, is the tracking number on the account page supposed to work? DPD can't find such tracking code...

plb

newbie

Activity: 6

Merit: 0

and also an estimated delivery for the order of "3-rd Week NOVEMBER Delivery" please

vanycon

sr. member

Activity: 317

Merit: 252

In Rarity I trust!

Can you give us an estimate delivery time for a bitfury order december shipping?

*edit: when ordering today*

marto74

hero member

Activity: 728

Merit: 500

Quote from: asyring on November 18, 2013, 08:49:26 AM

Is this board with or without chips?

The question is not answered yet.

with chips

asyring

newbie

Activity: 29

Merit: 0

Is this board with or without chips?

The question is not answered yet.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: AbiTxGroup on November 18, 2013, 08:25:28 AM

Quote from: loshia on November 18, 2013, 08:20:18 AM

Quote from: AbiTxGroup on November 18, 2013, 08:19:09 AM

I would like to see some actual customer screens while mining.

This is the first ASIC chips that I have seen without any hardware errors at all.

Read the Changelog dude
In current code they are not counted. Hash rate is real though.

The changelog. Is that on this page anywhere. If so, then I missed it. If not, then it was a good question....."dude".

Excuse me Miss/Mister "AbiTxGroup". I have to work on my manners obviously.
The changelog:

http://technobit.eu/index.php?controller=attachment&id_attachment=24

Actually i am mistaken this is not written inside but if you want please check:

http://technobit.eu/index.php?controller=attachment&id_attachment=23

Especially around line 1015

Have a nice day Miss/Mister "AbiTxGroup"

PS: In fact i am paying for HASH rate and i do not care about HW error rate as long as i get what i have paid for. What about you AbiTxGroup?
And more over with little bit overvoltage - about 910 Mv it is working at 45GH stable with Unknown/0% error rate

Topic: [ANN] Technobit HEX16B(Bitfury based) 16 chip board design - page 37. (Read 56539 times)