Pages:
Author

Topic: [ANN] Technobit HEX16B(Bitfury based) 16 chip board design - page 31. (Read 56527 times)

legendary
Activity: 1190
Merit: 1000
Be carefull when tighten or loosen the terminal screw since there is 1 capacitor closed.


legendary
Activity: 1190
Merit: 1000
just got mine.... problem though it doesnt have an molex atx power slot

That's weird, i believe marto said that molex will be default.
Try Wire Terminal Connection for power wiring
member
Activity: 61
Merit: 10
just got mine.... problem though it doesnt have an molex atx power slot
legendary
Activity: 1190
Merit: 1000
Speedy :-(
I went for the fast delivery on purpos(air)

The last i know if you are in EU then it's fine but if outside EU then it's no good. But lately many people in EU received late too.
newbie
Activity: 17
Merit: 0
Speedy :-(
I went for the fast delivery on purpos(air)
legendary
Activity: 1190
Merit: 1000
@Marto74, Any idea why the package is still in Sofia, now for a couple of days?
Is it stuck there?

Hi cbrboot, what is the courier?
legendary
Activity: 1190
Merit: 1000
Hi martin,
Where can I track my shipment with tracking number??

I have number but when I'm on DPD Bulgaria ((  http://www.dpd.com/bg_en/home  ))    
tracking number you provide is fault;  
  Give me some news please.


If your tracking is 6XXXXXXXXXX then try Speedy
Thanks Zich it's Good for my tracking Wink

No problem dude. But speedy tracking is like no other, they are useless. Even tracking by post is better. They only display item received by courier & delivered.

newbie
Activity: 17
Merit: 0
@Marto74, Any idea why the package is still in Sofia, now for a couple of days?
Is it stuck there?
hero member
Activity: 746
Merit: 502
Looking for advertising deal
2 weeks late...3rd week November delivery just arrived at my door...;/
newbie
Activity: 58
Merit: 0

Yes that should be enough and it uses cgminer. No worries you will not regret


Thanks guys - so when I get this TP Link router thing, does it connect into my miner then both these gets connected to my PSU?

It is working as a lower power computer running cgminer on linux.
It can be powered by the mains (like a USB phone charger) or a powered USB hub.
Connect it to the miners via a USB hub. Then connect it to your Internet router via a network cable (you may need to connect to your PC one time to set the correct IP/subnet/gateway if it's different than the default).


I remember seeing a screen grab somewhere of Marto testing 6 x HEX16B 40GH/s boards at the same time on his CGminer TP-Link - so whatever the CPU/network/USB limitations of the TP-Link are - I certainly won't be getting close anytime soon  Smiley...

Melb
hero member
Activity: 490
Merit: 500

Yes that should be enough and it uses cgminer. No worries you will not regret


Thanks guys - so when I get this TP Link router thing, does it connect into my miner then both these gets connected to my PSU?

It is working as a lower power computer running cgminer on linux.
It can be powered by the mains (like a USB phone charger) or a powered USB hub.
Connect it to the miners via a USB hub. Then connect it to your Internet router via a network cable (you may need to connect to your PC one time to set the correct IP/subnet/gateway if it's different than the default).
full member
Activity: 153
Merit: 100
Hi martin,
Where can I track my shipment with tracking number??

I have number but when I'm on DPD Bulgaria ((  http://www.dpd.com/bg_en/home  ))    
tracking number you provide is fault;  
  Give me some news please.


If your tracking is 6XXXXXXXXXX then try Speedy
Thanks Zich it's Good for my tracking Wink
sr. member
Activity: 364
Merit: 250

Yes that should be enough and it uses cgminer. No worries you will not regret

[/quote]

Thanks guys - so when I get this TP Link router thing, does it connect into my miner then both these gets connected to my PSU?
sr. member
Activity: 378
Merit: 250
How is this going to compete with todays difficulty?
legendary
Activity: 1610
Merit: 1000

Thanks guys - so when I get this TP Link router thing, does it connect into my miner then both these gets connected to my PSU?

If you buy TPLINK TL-MR3020 from TechnoBTCit then it's already flashed with openwrt image that include cgminer on it. If you buy TPLINK TL-MR3020 locally from your favorite computer shop then you need to flash the original firmware with linux base image openwrt which available on technoBTCit website.

Like loshia said, the TPLINK TL-MR3020 will act like "computer" with cgminer run in it. And it work standalone just like computer so you will save electricity cost. If you still had something to ask you can ask here or PM, me & loshia will happily answer your question  Grin
Yeah..And it will safe a lot of headaches, time and nerves..And finally money.. Cheesy

I bought the tplink as recommended but am not sure what it actually does Smiley I guess i will just use hexminer - is it easy to use ? Would i just type the ip in my browser to configure the miner then the miner will autoboot and start mining when it goes online?
Yes that should be enough and it uses cgminer. No worries you will not regret
sr. member
Activity: 364
Merit: 250

Thanks guys - so when I get this TP Link router thing, does it connect into my miner then both these gets connected to my PSU?

If you buy TPLINK TL-MR3020 from TechnoBTCit then it's already flashed with openwrt image that include cgminer on it. If you buy TPLINK TL-MR3020 locally from your favorite computer shop then you need to flash the original firmware with linux base image openwrt which available on technoBTCit website.

Like loshia said, the TPLINK TL-MR3020 will act like "computer" with cgminer run in it. And it work standalone just like computer so you will save electricity cost. If you still had something to ask you can ask here or PM, me & loshia will happily answer your question  Grin
Yeah..And it will safe a lot of headaches, time and nerves..And finally money.. Cheesy

I bought the tplink as recommended but am not sure what it actually does Smiley I guess i will just use hexminer - is it easy to use ? Would i just type the ip in my browser to configure the miner then the miner will autoboot and start mining when it goes online?
legendary
Activity: 1190
Merit: 1000
Hi martin,
Where can I track my shipment with tracking number??

I have number but when I'm on DPD Bulgaria ((  http://www.dpd.com/bg_en/home  ))    
tracking number you provide is fault;  
  Give me some news please.


If your tracking is 6XXXXXXXXXX then try Speedy
full member
Activity: 153
Merit: 100
Hi martin,
Where can I track my shipment with tracking number??

I have number but when I'm on DPD Bulgaria ((  http://www.dpd.com/bg_en/home  ))   
tracking number you provide is fault; 
  Give me some news please.
legendary
Activity: 1610
Merit: 1000
I bought the tplink as recommended but am not sure what it actually does Smiley I guess i will just use hexminer - is it easy to use ?


If you buy TPLINK TL-MR3020 from TechnoBTCit then it's already flashed with openwrt image that include cgminer on it. If you buy TPLINK TL-MR3020 locally from your favorite computer shop then you need to flash the original firmware with linux base image openwrt which available on technoBTCit website.

Like loshia said, the TPLINK TL-MR3020 will act like "computer" with cgminer run in it. And it work standalone just like computer so you will save electricity cost. If you still had something to ask you can ask here or PM, me & loshia will happily answer your question  Grin
Yeah..And it will safe a lot of headaches, time and nerves..And finally money.. Cheesy
legendary
Activity: 1190
Merit: 1000
I bought the tplink as recommended but am not sure what it actually does Smiley I guess i will just use hexminer - is it easy to use ?


If you buy TPLINK TL-MR3020 from TechnoBTCit then it's already flashed with openwrt image that include cgminer on it. If you buy TPLINK TL-MR3020 locally from your favorite computer shop then you need to flash the original firmware with linux base image openwrt which available on technoBTCit website.

Like loshia said, the TPLINK TL-MR3020 will act like "computer" with cgminer run in it. And it work standalone just like computer so you will save electricity cost. If you still had something to ask you can ask here or PM, me & loshia will happily answer your question  Grin
Pages:
Jump to: