Pages:
Author

Topic: [ANN] The Nibble (NBL) Trade On Cryptsy.com **Update Your Conf File*** - page 45. (Read 84065 times)

sr. member
Activity: 448
Merit: 250
POOL IS HERE:  http://nibble.scryptmining.com   Check us out, finally starting to see some blocks roll in.  Bit rough around the edges, was thrown together in the first 5-10min of coin launch.   PM me if you notice serious problems!

Thanks for the pool. Hashrate seems to be off. I have ~27,500KH pointed at it and it's showing up as 56,765KH currently. Wish I had that much! Smiley

Indeed, sorry.  Haven't had a chance to look into the required tweaks for the hashrate display.
sr. member
Activity: 462
Merit: 250
POOL IS HERE:  http://nibble.scryptmining.com   Check us out, finally starting to see some blocks roll in.  Bit rough around the edges, was thrown together in the first 5-10min of coin launch.   PM me if you notice serious problems!

Thanks for the pool. Hashrate seems to be off. I have ~27,500KH pointed at it and it's showing up as 56,765KH currently. Wish I had that much! Smiley
sr. member
Activity: 448
Merit: 250
yep.  Its display only, but fixing up now.  Due to the big backlog of found but unconfirmed (120 confirms) blocks.
sr. member
Activity: 294
Merit: 250
trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 

Host should be:  198.245.60.126 (not nibble.scryptmining.com)
why is pool Round Shares   -123,457

Looking at it now (though pool valid unpaid looks okish)

Current Round Shares [Total shares since last found block]
Pool Valid: -171399  now
full member
Activity: 147
Merit: 100
thanks! Smiley  connected now

trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 

Host should be:  198.245.60.126 (not nibble.scryptmining.com)
sr. member
Activity: 448
Merit: 250
trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 

Host should be:  198.245.60.126 (not nibble.scryptmining.com)
why is pool Round Shares   -123,457

Looking at it now (though pool valid unpaid looks okish)
legendary
Activity: 980
Merit: 1000
Historically, every currency without "coin" at the end has died out. Tenebrix, GeistGeld, etc
sr. member
Activity: 294
Merit: 250
trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 

Host should be:  198.245.60.126 (not nibble.scryptmining.com)
why is pool Round Shares   -123,457
legendary
Activity: 1050
Merit: 1000
I've added a new p2pool. With the difficulty increase, it will be useful.

Here are the parameters:

cgminer --scrypt -o next.afraid.org:8118 -u yourNIBaddress -p .

statistics available here: http://next.afraid.org:8118

----------------
2% fee.


Gave up on this - almost 40% rejects.

Also no payout yet but I guess that takes time.
hero member
Activity: 798
Merit: 1000
‘Try to be nice’
put -s 1 on at the end of my cmd - seemed to help a little

still more rejects than accepts
sr. member
Activity: 448
Merit: 250
trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 

Host should be:  198.245.60.126 (not nibble.scryptmining.com)
full member
Activity: 122
Merit: 100

I am on this pool - if the owner can help me even shave down the oh.....1429 Rejects i have , i will donate to the pool !

i have a sad and moderate 2.4 M# to put towards. "hey it all helps"
Yeah I'm having the same problem anything higher than 12 intensity give me almost 100% rejects, at 12 intensity I'm getting about 30% rejects
full member
Activity: 147
Merit: 100
trying to connect to nibble.scryptmining.com with this command (after registering) and cgminer just timing out....


cgminer.exe --scrypt -u [redacted] -p [redacted] -o stratum+tcp://nibble.scryptmining.com:8080 -s 5 -E 5   


what I am missing? 
sr. member
Activity: 305
Merit: 250
what is your latency to the pool node by chance?  With such quick blocks being solved by the pool its likely the block is solved (and job removed) before you end up submitting the share.   I'll keep looking into it though, I may bring up a 2nd server in another location.  I'll keep an eye on whether the complaints get more wide-spread.

I'm in WA state, here is a trace to the last hop that will respond:

Tracing route to can.aaaservers.com [198.245.60.126]
over a maximum of 30 hops:

  1     1 ms     1 ms    <1 ms  [192.168.0.1]
  2     2 ms     2 ms     1 ms  65-61-116-97.ptr.tierpoint.com [65.61.116.97]
  3     2 ms     2 ms     2 ms  br2-20g-po6.spkn.tierpoint.com [65.61.96.117]
  4     9 ms     9 ms     9 ms  209.119.202.9
  5    12 ms    11 ms    11 ms  216.156.0.209.ptr.us.xo.net [216.156.0.209]
  6    45 ms     9 ms     9 ms  ae0d0.cir1.seattle7-wa.us.xo.net [207.88.13.141]

  7    49 ms    32 ms    32 ms  4.59.232.53
  8    29 ms    29 ms    28 ms  ae-31-51.ebr1.seattle1.level3.net [4.69.147.150]

  9    29 ms    31 ms    29 ms  ae-7-7.ebr2.sanjose1.level3.net [4.69.132.49]
 10    29 ms    28 ms    40 ms  ae-72-72.csw2.sanjose1.level3.net [4.69.153.22]

 11    28 ms    28 ms    28 ms  ae-2-70.edge1.sanjose3.level3.net [4.69.152.80]

 12   209 ms   203 ms   219 ms  snj-1-6k.ca.us [178.32.135.21]
 13     *        *        *     Request timed out.

Also, I am using scantime of 1.
hero member
Activity: 798
Merit: 1000
‘Try to be nice’

I am on this pool - if the owner can help me even shave down the oh.....1429 Rejects i have , i will donate to the pool !

i have a sad and moderate 2.4 M# to put towards. "hey it all helps"

Whats your worker name?   Have you adjust scan time?  I suspect by the time your client returns the work the block is already solved, but can look a bit more by worker name.

digitalindustry.digi

I have expiry in the conf - but that's about it - don't know how to add scan time .
sr. member
Activity: 448
Merit: 250
what is your latency to the pool node by chance?  With such quick blocks being solved by the pool its likely the block is solved (and job removed) before you end up submitting the share.   I'll keep looking into it though, I may bring up a 2nd server in another location.  I'll keep an eye on whether the complaints get more wide-spread.
sr. member
Activity: 305
Merit: 250

I am on this pool - if the owner can help me even shave down the oh.....1429 Rejects i have , i will donate to the pool !

i have a sad and moderate 2.4 M# to put towards. "hey it all helps"

I have the same problem, my worker name is vsjensen.0 and vsjensen.7, both are getting about 1/3 accepted and 2/3 rejected with messages of (job 'xxx' not found)
newbie
Activity: 22
Merit: 0
Rejects/orphans starting to stabilize. Confirmations are about 50% for me now.
sr. member
Activity: 266
Merit: 250
"difficulty" : 0.06250000,"

Just after block 8064.
sr. member
Activity: 448
Merit: 250

I am on this pool - if the owner can help me even shave down the oh.....1429 Rejects i have , i will donate to the pool !

i have a sad and moderate 2.4 M# to put towards. "hey it all helps"

Whats your worker name?   Have you adjust scan time?  I suspect by the time your client returns the work the block is already solved, but can look a bit more by worker name.
Pages:
Jump to: