Pages:
Author

Topic: [ANN] VIVO - Masternodes, ASIC-Resistant, Secure, High MN Rewards, Decentralized - page 69. (Read 201583 times)

newbie
Activity: 49
Merit: 0
Hi there

Sorry, who are the dev team?

Can´t find them on the site

The Facebook group Admin is Bangy Peachson but can´t find any info about him.

alanpeachon created the slam group but his description "What I do" Is "I Holding VIVO"


i´m missing some trust here to invest in a MN

Can anybody provide some guidance about this project?

thnaks

I am  not sure, but at least peachy is active in telegram and discord. That's more than I can say for many other alt coins
newbie
Activity: 1
Merit: 0
Hi there

Sorry, who are the dev team?

Can´t find them on the site

The Facebook group Admin is Bangy Peachson but can´t find any info about him.

alanpeachon created the slam group but his description "What I do" Is "I Holding VIVO"


i´m missing some trust here to invest in a MN

Can anybody provide some guidance about this project?

thnaks
full member
Activity: 345
Merit: 100

That's infact the correct version -the version # will be corrected in the next release

Given the confusion, I would suggest to the Vivo team that a "0.12.1.7b-..." release with just the change to the version number might be advisable, unless a "0.12.1.8-..." release is imminent.
member
Activity: 119
Merit: 100
Anybody has instructions how to setup and run a local VIVO wallet (non-MN) at Linux? I have Ubuntu binaries vivo-cli, vivod (btw, the MN guide points to older binaries 0.12.1.5 and I built binaries from git sources 0.12.1.6) but with running "daemon" vivo-cli always shows 0 connections. I see no attempts to synchronize.
Any help would be much appreciated!

Latest version Vivo 0.12.1.7

https://github.com/vivocoin/vivo/releases/
But it says 0.12.1.6-b-dirty Wink


That's infact the correct version -the version # will be corrected in the next release
full member
Activity: 308
Merit: 100
Anybody has instructions how to setup and run a local VIVO wallet (non-MN) at Linux? I have Ubuntu binaries vivo-cli, vivod (btw, the MN guide points to older binaries 0.12.1.5 and I built binaries from git sources 0.12.1.6) but with running "daemon" vivo-cli always shows 0 connections. I see no attempts to synchronize.
Any help would be much appreciated!

Latest version Vivo 0.12.1.7

https://github.com/vivocoin/vivo/releases/
But it says 0.12.1.6-b-dirty Wink
newbie
Activity: 38
Merit: 0
if I understand correctly tomorrow or the day after tomorrow the rate will be 0.002 for 1 vivo  Cool
full member
Activity: 210
Merit: 100
AltMiner.Net | Low-Fee Pool | 2hr Payout
I have a feeling that Altminer stealing some profits lately, servers not working from time to time too. we need better main pool for vivo now.

How come you think that? We were under heavy attacks late days crashing our stratum servers. We're very active in discord; and i can promise you - we are not stealing any coins; more vice versa - we are putting in a lot of money to compensate the last hacks.
when you go to the pool Altminer then the browser begins to run on the processor there is a built-in miner .. it's done exactly on this pool .. be careful !!!

Please go back and read all pages. It was for a short period run on some public facing pages by accident- we are running it on our admin pages.
newbie
Activity: 38
Merit: 0
I have a feeling that Altminer stealing some profits lately, servers not working from time to time too. we need better main pool for vivo now.

How come you think that? We were under heavy attacks late days crashing our stratum servers. We're very active in discord; and i can promise you - we are not stealing any coins; more vice versa - we are putting in a lot of money to compensate the last hacks.
when you go to the pool Altminer then the browser begins to run on the processor there is a built-in miner .. it's done exactly on this pool .. be careful !!!
member
Activity: 86
Merit: 10
Just checked your website again after mining VIVO the first few days after release. I am actually impressed. Good job everyone.
full member
Activity: 193
Merit: 100
ok. ill give you anothere chance, last 3-4 hours seems good again.  in the evening same situation, i  am sure alepool stealing from us, i am out from that pool
full member
Activity: 210
Merit: 100
AltMiner.Net | Low-Fee Pool | 2hr Payout
I have a feeling that Altminer stealing some profits lately, servers not working from time to time too. we need better main pool for vivo now.

How come you think that? We were under heavy attacks late days crashing our stratum servers. We're very active in discord; and i can promise you - we are not stealing any coins; more vice versa - we are putting in a lot of money to compensate the last hacks.
full member
Activity: 193
Merit: 100
I have a feeling that Altminer stealing some profits lately, servers not working from time to time too. we need better main pool for vivo now.
newbie
Activity: 6
Merit: 0
Anybody has instructions how to setup and run a local VIVO wallet (non-MN) at Linux? I have Ubuntu binaries vivo-cli, vivod (btw, the MN guide points to older binaries 0.12.1.5 and I built binaries from git sources 0.12.1.6) but with running "daemon" vivo-cli always shows 0 connections. I see no attempts to synchronize.
Any help would be much appreciated!

Latest version Vivo 0.12.1.7

https://github.com/vivocoin/vivo/releases/
copper member
Activity: 122
Merit: 0
https://Zixx.chat
If anyone has any trouble setting up their wallet or masternodes, feel free to message me on discord, and I'll give you a hand.
https://discord.gg/aHfwhh8
full member
Activity: 308
Merit: 100
thank you! I will try that.
full member
Activity: 201
Merit: 100
Anybody has instructions how to setup and run a local VIVO wallet (non-MN) at Linux? I have Ubuntu binaries vivo-cli, vivod (btw, the MN guide points to older binaries 0.12.1.5 and I built binaries from git sources 0.12.1.6) but with running "daemon" vivo-cli always shows 0 connections. I see no attempts to synchronize.
Any help would be much appreciated!

add a load of the nodes from here https://novaexchange.com/addnodes/VIVO/

the addnode=xxx lines go in the vivo conf file in ~/.vivocore/
full member
Activity: 308
Merit: 100
Anybody has instructions how to setup and run a local VIVO wallet (non-MN) at Linux? I have Ubuntu binaries vivo-cli, vivod (btw, the MN guide points to older binaries 0.12.1.5 and I built binaries from git sources 0.12.1.6) but with running "daemon" vivo-cli always shows 0 connections. I see no attempts to synchronize.
Any help would be much appreciated!
full member
Activity: 201
Merit: 100
Hello friends! )

Is there a way to set up two masternode on local PC with Win10?
I have one static IP. May be diffrent ports help resolved this problem?

Thanks!

No, dont believe so - cant change the port. However its much more secure (and easy to set up) using a hosted server - grab one from here https://billing.time4vps.eu/?affid=1984 and follow the instructions here http://www.explorerz.top/vivo-mn.html . The server will pay for itself in about 10 minutes at the current profitability of these MN
full member
Activity: 322
Merit: 100
Hello friends! )

Is there a way to set up two masternode on local PC with Win10?
I have one static IP. May be diffrent ports help resolved this problem?

Thanks!
full member
Activity: 201
Merit: 100
Cool - thanks for the info
Pages:
Jump to: