check this https://cryptnz.com/status voya wallet on that exchange is not fully synced , thei need to sync thei wallet and then the coins will start to show on your balance
Hm... Not fully synced may create forks?
Topic: [ANN] [VOYA] Voyacoin - [PLUCK][Just Launched] The return of profitable mining! - page 4. (Read 24011 times)
February 25, 2015, 06:13:07 AM
Hm... Not fully synced may create forks?
February 25, 2015, 06:11:21 AM
It seems that blockchain doesn't work, I sent some come coins from pool to exchange and nothing happens, wallet doesn't sync to...
addnode=node.coin-miners.info
wallet works
, coins on cryptNZ still missing 
check this https://cryptnz.com/status voya wallet on that exchange is not fully synced , thei need to sync thei wallet and then the coins will start to show on your balance
February 25, 2015, 05:54:12 AM
It seems that blockchain doesn't work, I sent some come coins from pool to exchange and nothing happens, wallet doesn't sync to...
addnode=node.coin-miners.info
wallet works
, coins on cryptNZ still missing February 25, 2015, 05:53:55 AM
Dev is there any bounty for translation etc?
February 25, 2015, 05:51:48 AM
Hey guys
Here i just opened a blocks explorer for voya coin http://block-explorer.coin-miners.info:3011/ and updated the pool , the current block explorer is not showing all the tx , and for the miners do not send any coins to https://cryptnz.com/ exchange thei wallet is out of sync you can check here https://cryptnz.com/status
If you need node to sync you wallet you can use this one addnode=node.coin-miners.info
Here i just opened a blocks explorer for voya coin http://block-explorer.coin-miners.info:3011/ and updated the pool , the current block explorer is not showing all the tx , and for the miners do not send any coins to https://cryptnz.com/ exchange thei wallet is out of sync you can check here https://cryptnz.com/status
If you need node to sync you wallet you can use this one addnode=node.coin-miners.info
February 25, 2015, 04:59:38 AM
Hey!
Are you looking for a multipool?
Then head over to my thread for more info!
https://bitcointalksearch.org/topic/multipool-service-10-a-month-update-932225
PM me or reply on my thread, will NOT be looking here again.
Are you looking for a multipool?
Then head over to my thread for more info!
https://bitcointalksearch.org/topic/multipool-service-10-a-month-update-932225
PM me or reply on my thread, will NOT be looking here again.
February 25, 2015, 04:56:18 AM
It seems that blockchain doesn't work, I sent some come coins from pool to exchange and nothing happens, wallet doesn't sync to...
addnode=node.coin-miners.info
February 25, 2015, 04:06:18 AM
It seems that blockchain doesn't work, I sent some come coins from pool to exchange and nothing happens, wallet doesn't sync to...
February 25, 2015, 02:03:54 AM
no its not.
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.
And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s
How did you OC the memory?
Just tried that, but it still runs at 3000Mhz on afterburner.
install nvinspector
go to overclocking
select P2 state
select unlock max
set 4000mhz
click apply
default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia.
I'm getting a max of 3500Mhz and 3600Mhz on both of my cards, the slider on the nvinspector ends there, only in P3 it goes till 4000Mhz.
first OC mem in MSI Afterburner to max (4000mhz for me)
then apply
then go to NVinspector P2 state. Click "unlock max" the slider will go up to 4000mhz as well
Click apply
February 24, 2015, 10:41:44 PM
What website this coin?
February 24, 2015, 10:22:18 PM
We need better exchange. At least Ccex.
We have messaged the bigger and more reputable exchanges, waiting to hear back from them.
Edit: Bittrex has replied and said they will look over us soon so fingers crossed for you guys, as we know a larger reputable exchange is what you are all after!
February 24, 2015, 07:14:17 PM
no its not.
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.
And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s
How did you OC the memory?
Just tried that, but it still runs at 3000Mhz on afterburner.
install nvinspector
go to overclocking
select P2 state
select unlock max
set 4000mhz
click apply
default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia.
I'm getting a max of 3500Mhz and 3600Mhz on both of my cards, the slider on the nvinspector ends there, only in P3 it goes till 4000Mhz.
February 24, 2015, 12:34:28 PM
We need better exchange. At least Ccex.
February 24, 2015, 09:23:23 AM
I'll try to mine this. Is it worth it? Does this have a chance for better exchange and stable/rising price?
Also, doesn't Earlz mind for snatching his algo?
Also, doesn't Earlz mind for snatching his algo?
February 24, 2015, 04:41:11 AM
yep 
February 24, 2015, 03:58:32 AM
Net Hashrate: 2,843.14 KH/s
February 24, 2015, 03:21:19 AM
no its not.
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
just create a .bat file
any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.
And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s
How did you OC the memory?
Just tried that, but it still runs at 3000Mhz on afterburner.
install nvinspector
go to overclocking
select P2 state
select unlock max
set 4000mhz
click apply
default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia.
February 23, 2015, 10:25:07 PM
Have updated the main post to include the AMD Miner thanks to djm34! We would love to send djm34 and Wolf0 some VOYA for your efforts so PM us and we will send you some through as support for your work! Also you to earlz for PLUCK
sure, you can send some here: LNcbpwChYS1rHAoTmVReLEEjiTKgYPFYyfHowever, I personnally think you rushed into making that coin, you have waited
You basically repeat the same mistake which were made over and over last year...
It won't profit to your coin and will basically undermine EarlZ effort into making something new...
Will send some through, our intentions were not to undermine Earlz in anyway at all. We are greatful of the hard work and effort he put into it, and makes a perfect base for creating a project. It also makes mining more profitable therefore the network is secured by ensuring there will be miners, as the network is essentially the backbone of the project.
We appologize to Earlz if he thinks we have undermined or insulted you in anyway possible, we really do love your work.
February 23, 2015, 10:18:10 PM
Have updated the main post to include the AMD Miner thanks to djm34! We would love to send djm34 and Wolf0 some VOYA for your efforts so PM us and we will send you some through as support for your work! Also you to earlz for PLUCK
sure, you can send some here: LNcbpwChYS1rHAoTmVReLEEjiTKgYPFYyfHowever, I personnally think you rushed into making that coin, you should have waited
You basically repeat the same mistake which were made over and over last year...
It won't profit to your coin and will basically undermine EarlZ effort into making something new...
Also the only reason which pushed you to make that coin is the huge sell price at launch, hence greed,
but since you promised to send some voya, I will not complain
I hope since you doubled the premine, you will also double as well what you will send me for the miners
February 23, 2015, 09:57:30 PM
We don't have any AMD equipment to test out the new miner but hopefully it is all working for you guys!
We are nearly ready to get our own block explorer up and going just finalising some extra features and tweaking a few things.
We are nearly ready to get our own block explorer up and going just finalising some extra features and tweaking a few things.
Jump to: