[ANN] [VOYA] Voyacoin - [PLUCK][Just Launched] The return of profitable mining! - page 5.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: AliMan on February 23, 2015, 07:40:41 PM

Quote from: Vann on February 23, 2015, 07:27:37 PM

Quote from: AliMan on February 23, 2015, 05:45:03 PM

Quote from: DES_MX on February 23, 2015, 12:58:28 PM

no its not.

just create a .bat file
any type in:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

if fail change -I from 13 to 12

Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.

And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s

How did you OC the memory?

Try --gpu-memclock 1500

Just tried that, but it still runs at 3000Mhz on afterburner.

On some systems i.e. like my Dell, you have to enable overclocking in the Bios before you can adjust the settings.

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

Quote from: Vann on February 23, 2015, 07:27:37 PM

Quote from: AliMan on February 23, 2015, 05:45:03 PM

Quote from: DES_MX on February 23, 2015, 12:58:28 PM

no its not.

just create a .bat file
any type in:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

if fail change -I from 13 to 12

Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.

And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s

How did you OC the memory?

Try --gpu-memclock 1500

Just tried that, but it still runs at 3000Mhz on afterburner.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: AliMan on February 23, 2015, 05:45:03 PM

Quote from: DES_MX on February 23, 2015, 12:58:28 PM

no its not.

just create a .bat file
any type in:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

if fail change -I from 13 to 12

Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.

And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s

How did you OC the memory?

Try --gpu-memclock 1500

Vann

hero member

Activity: 1036

Merit: 606

Quote from: Raskal on February 23, 2015, 03:38:22 PM

Quote from: Clminer on February 23, 2015, 02:10:50 PM

can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

he keeps saying "libcurl.ddl" is missing?

Huh

If you have a previous sgminer5 just copy the files you need from that directory and paste them into the new sgminer directory. Also you may wanna drop the no-submit-stale I get a shit load of stales with that but without it they are almost all accepted.

That probably means your share expiry time is set too low. If you are mining on a pool try --expiry 20.

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

Quote from: DES_MX on February 23, 2015, 12:58:28 PM

no its not.

just create a .bat file
any type in:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

if fail change -I from 13 to 12

Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0.

And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s

How did you OC the memory?

Raskal

member

Activity: 67

Merit: 10

A Fools Paradise Is A Wise Man's Hell

Quote from: Clminer on February 23, 2015, 02:10:50 PM

can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

he keeps saying "libcurl.ddl" is missing?

Huh

If you have a previous sgminer5 just copy the files you need from that directory and paste them into the new sgminer directory. Also you may wanna drop the no-submit-stale I get a shit load of stales with that but without it they are almost all accepted.

Clminer

full member

Activity: 154

Merit: 100

can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

he keeps saying "libcurl.ddl" is missing?

Huh

Voya

newbie

Activity: 14

Merit: 0

Quote from: beks1 on February 23, 2015, 06:57:00 AM

Promotion coin
maybe poloniex giveaway?

We are looking at doing a promotion giveaway shortly to gain more interest, unsure if poloniex would do it as we aren't listed there?

DES_MX

member

Activity: 216

Merit: 13

no its not.

just create a .bat file
any type in:

sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13

if fail change -I from 13 to 12

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

Quote from: DES_MX on February 23, 2015, 08:55:15 AM

Quote from: nenadubica on February 23, 2015, 07:00:42 AM

Yeah,the algo is realy nice and cold Wink

I can already see some space for optimization since the card are hovering at really low temps
and can be put on torchering a bit more.
But,nothing a bit of optimization with the kernels and settings cannot do.

Are you mining with nvidia? in that case you should try the sgminer (no joke) you just need to change GPU platform flag to "1"
setting for GTX980 is -w 4 -i 13 netting 10,5 Khash +
Also check your mem frequency. its using P2 state, so it doens't overclock when miner is active. you need to enable OC in P2 state manually.

GPU Usage will jump to 88%

For someone that hasn't used amd miners before, well its a real pain in the ass to set it up. Still don't have it running.

DES_MX

member

Activity: 216

Merit: 13

Quote from: nenadubica on February 23, 2015, 07:00:42 AM

Yeah,the algo is realy nice and cold Wink

I can already see some space for optimization since the card are hovering at really low temps
and can be put on torchering a bit more.
But,nothing a bit of optimization with the kernels and settings cannot do.

Are you mining with nvidia? in that case you should try the sgminer (no joke) you just need to change GPU platform flag to "1"
setting for GTX980 is -w 4 -i 13 netting 10,5 Khash +
Also check your mem frequency. its using P2 state, so it doens't overclock when miner is active. you need to enable OC in P2 state manually.

GPU Usage will jump to 88%

Nthused

legendary

Activity: 1554

Merit: 1001

I guess I must of overlooked this coin, I didn't even notice it on the ANN page lol

nenadubica

member

Activity: 76

Merit: 10

Yeah,the algo is realy nice and cold Wink

I can already see some space for optimization since the card are hovering at really low temps
and can be put on torchering a bit more.
But,nothing a bit of optimization with the kernels and settings cannot do.

beks1

newbie

Activity: 50

Merit: 0

Promotion coin
maybe poloniex giveaway?

DES_MX

member

Activity: 216

Merit: 13

Really looking forward to seeing this coin develop.
The algorithm is really nice, very promising.

We must ensure that more people get on board, why don't you initiate give-aways like it was done with the SpreadCoin?
e.g. people can send screenshots of first 10 coins mined (for example) and you reimburse them with additional 10 coins?

Just a suggestion.

beks1

newbie

Activity: 50

Merit: 0

contacting poloniex?
I love poloniex voya first pluck coin on poloniex Wink

Voya

newbie

Activity: 14

Merit: 0

Quote from: nenadubica on February 23, 2015, 02:08:09 AM

Greetings.
Congratulations for a very decent coin and a nice start.
I am contributing with a nice share of the total amount of hashing speed.
Can you tell me which exchanges have you contacted?
I think this is the point we should be working on..

We are in the process of contacting the main exchanges, but the community should show them the demand too.

On top of the we are trying to get our next push to github out for Version 1.0.1

nenadubica

member

Activity: 76

Merit: 10

Greetings.
Congratulations for a very decent coin and a nice start.
I am contributing with a nice share of the total amount of hashing speed.
Can you tell me which exchanges have you contacted?
I think this is the point we should be working on..

Voya

newbie

Activity: 14

Merit: 0

Have updated the main post to include the AMD Miner thanks to djm34! We would love to send djm34 and Wolf0 some VOYA for your efforts so PM us and we will send you some through as support for your work! Also you to earlz for PLUCK

AliMan

hero member

Activity: 1974

Merit: 502

Vave.com - Crypto Casino

Quote from: Shadow_Runner on February 22, 2015, 02:33:26 PM

Quote from: AliMan on February 22, 2015, 02:29:57 PM

What do you have in your conf?

Code:

maxconnections=100
rpcuser=solo
rpcpassword=pass
rpcport=7755
gen=0
server=1
daemon=1

Thanks buddy.

Topic: [ANN] [VOYA] Voyacoin - [PLUCK][Just Launched] The return of profitable mining! - page 5. (Read 24011 times)