[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 401.

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: My9bot on August 26, 2017, 06:12:21 AM

Quote from: The Frisian on August 26, 2017, 05:57:41 AM

My wallet, version 1.4.3.0 stopped synching this morning.
Worked like charm until this morning.
Does anyone knows why?

the think the main node at 104.128.225.215 its overloaded with connections

you could be right, but then nobody's wallet is working?

My9bot

full member

Activity: 239

Merit: 100

Quote from: The Frisian on August 26, 2017, 05:57:41 AM

My wallet, version 1.4.3.0 stopped synching this morning.
Worked like charm until this morning.
Does anyone knows why?

the think the main node at 104.128.225.215 its overloaded with connections

Apprentice

full member

Activity: 500

Merit: 105

Quote from: AngryWhiteWolf on August 26, 2017, 05:41:42 AM

Quote from: pmsk on August 26, 2017, 05:30:58 AM

Do you really think it's a solution? It's not question for you, but question for all. There is no problem to create 10-20-100 accounts, configure mining sw and in the end to get a perfect picture: 100 users with 40kh/s instean one with 4000kh/s.

It's a good start. Let them try, could have unpleasant surprises. Especially if the coins mined using hash rate above limit are not paid.

you can't make a min-able coin and ask people to limit their hash rate. People will fire up whatever hash rate they can find to get coins.

My9bot

full member

Activity: 239

Merit: 100

Quote from: jmik on August 26, 2017, 05:53:40 AM

Unless they use a very sophisticated setup, all those accounts would have the same IP though. That's pretty easy to detect.

Quote from: pmsk on August 26, 2017, 05:30:58 AM

Do you really think it's a solution? It's not question for you, but question for all. There is no problem to create 10-20-100 accounts, configure mining sw and in the end to get a perfect picture: 100 users with 40kh/s instean one with 4000kh/s.

than use proxys vpns ...
useless....
you can´t stop them

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

My wallet, version 1.4.3.0 stopped synching this morning.
Worked like charm until this morning.
Does anyone knows why?

jmik

newbie

Activity: 12

Merit: 0

Unless they use a very sophisticated setup, all those accounts would have the same IP though. That's pretty easy to detect.

Quote from: pmsk on August 26, 2017, 05:30:58 AM

Do you really think it's a solution? It's not question for you, but question for all. There is no problem to create 10-20-100 accounts, configure mining sw and in the end to get a perfect picture: 100 users with 40kh/s instean one with 4000kh/s.

AngryWhiteWolf

full member

Activity: 616

Merit: 100

Quote from: pmsk on August 26, 2017, 05:30:58 AM

Do you really think it's a solution? It's not question for you, but question for all. There is no problem to create 10-20-100 accounts, configure mining sw and in the end to get a perfect picture: 100 users with 40kh/s instean one with 4000kh/s.

It's a good start. Let them try, could have unpleasant surprises. Especially if the coins mined using hash rate above limit are not paid.

tommyrsk

newbie

Activity: 52

Merit: 0

Quote from: akuci on August 25, 2017, 03:51:00 PM

@TrasMaMod owner

Please fix your pools dashboard. It just stops refreshing after a while.

There is none known issues with the dashboard. I'm using it by my self and has no issue. It could be some browser related.

Code:

Refresh interval: 5 seconds, worker and account 5 seconds. Hashrate based on shares submitted in the past 5 minutes.

pmsk

newbie

Activity: 73

Merit: 0

Quote from: tommyrsk on August 26, 2017, 04:51:33 AM

Quote from: vervetech on August 25, 2017, 11:33:15 PM

Can someone clearly confirm that we should only be mining at 300 KH/s per person or per mining rig? I just have some i7 machines that lay around doing nothing so i sent them off mining XMG.

The max speed of 300KH/s per user is a limit that is set by us on our pool TrasMaMod. That means persons who mine over 300KH/s must reduce their mining speed, if not, they are miners we dont want on the pool, and will be banned.

This limit has nothing to do with the general mining in the network.
BUT: we encourages every pool owners to do similar as us.

Do you really think it's a solution? It's not question for you, but question for all. There is no problem to create 10-20-100 accounts, configure mining sw and in the end to get a perfect picture: 100 users with 40kh/s instean one with 4000kh/s.

starmman

legendary

Activity: 1484

Merit: 1029

Quote from: tommyrsk on August 26, 2017, 05:16:18 AM

Quote from: Boocha466 on August 26, 2017, 04:58:45 AM

LoL - http://prntscr.com/gd8ahi 678 kh/s

User has been warned. If there is no improvements in short time. He will be banned.
(we warn first before blocking)

Great that action is being taken - hopefully the chain will keep up... tons of posts on the thread today - its difficult to keep up - dont think I've ever seen so much activity on here. Great that lots more people are starting to take notice of Magi =D

gunka

full member

Activity: 378

Merit: 101

Quote from: Boocha466 on August 26, 2017, 04:58:45 AM

Quote from: tommyrsk on August 26, 2017, 04:51:33 AM

Quote from: vervetech on August 25, 2017, 11:33:15 PM

Can someone clearly confirm that we should only be mining at 300 KH/s per person or per mining rig? I just have some i7 machines that lay around doing nothing so i sent them off mining XMG.

The max speed of 300KH/s per user is a limit that is set by us on our pool TrasMaMod. That means persons who mine over 300KH/s must reduce their mining speed, if not, they are miners we dont want on the pool, and will be banned.

This limit has nothing to do with the general mining in the network.
BUT: we encourages every pool owners to do similar as us.

LoL - http://prntscr.com/gd8ahi 678 kh/s

LOL

xmg.minerclaim.net
The Max Hashrate per User is 250KH/s
https://xmg.minerclaim.net/index.php?page=statistics&action=pool
Everyone has more than 250 kh/s Cheesy

)))))

tommyrsk

newbie

Activity: 52

Merit: 0

Quote from: Boocha466 on August 26, 2017, 04:58:45 AM

LoL - http://prntscr.com/gd8ahi 678 kh/s

User has been warned. If there is no improvements in short time. He will be banned.
(we warn first before blocking)

penambang

hero member

Activity: 548

Merit: 501

Quote from: nsummy on August 25, 2017, 11:53:59 PM

Quote from: penambang on August 25, 2017, 12:12:02 PM

More mempool error on my NOMP pool

Code:

received block 000000001a86d38a2eb1
SetBestChain: new best=000000001a86d38a2eb19f1238358b9db3bb0590a60c650671de722bb179c5a4  height=1452104  money supply=7991958  trust=66013855359244  date=08/25/17 17:05:45
Stake checkpoint: 47c28008
ProcessBlock: ACCEPTED
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
Flushing wallet.dat
Flushed wallet.dat 1ms
Flushed 0 addresses to peers.dat  1ms
received block 00000000796ec87c78c0
SetBestChain: new best=00000000796ec87c78c01eb782ad5169206578826d3ff9aa045d3baf9da66e3a  height=1452105  money supply=7991963  trust=66013855364592  date=08/25/17 17:06:41
Stake checkpoint: fb0aac60
ProcessBlock: ACCEPTED
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
ERROR: mempool transaction missing input
Flushing wallet.dat
Flushed wallet.dat 0ms

My magi.conf:

Code:

rpcuser=redacted
rpcpassword=redacted
# Listen for RPC connections on this TCP port:
rpcport=8232

# server=1 to accept JSON-RPC commands
server=1
daemon=1
# listen=1 to accept connections from outside
listen=0

# RPC connection from localhost allowed
rpcallowip=127.0.0.1

connect=104.128.225.215

posii=0

Did you ever get this figured out? Its happening to my wallet now Sad

My problem solved by importing private key to new wallet, no more mempool error for now.

Boocha466

newbie

Activity: 42

Merit: 0

Quote from: tommyrsk on August 26, 2017, 04:51:33 AM

Quote from: vervetech on August 25, 2017, 11:33:15 PM

Can someone clearly confirm that we should only be mining at 300 KH/s per person or per mining rig? I just have some i7 machines that lay around doing nothing so i sent them off mining XMG.

The max speed of 300KH/s per user is a limit that is set by us on our pool TrasMaMod. That means persons who mine over 300KH/s must reduce their mining speed, if not, they are miners we dont want on the pool, and will be banned.

This limit has nothing to do with the general mining in the network.
BUT: we encourages every pool owners to do similar as us.

LoL - http://prntscr.com/gd8ahi 678 kh/s

tommyrsk

newbie

Activity: 52

Merit: 0

Quote from: vervetech on August 25, 2017, 11:33:15 PM

Can someone clearly confirm that we should only be mining at 300 KH/s per person or per mining rig? I just have some i7 machines that lay around doing nothing so i sent them off mining XMG.

The max speed of 300KH/s per user is a limit that is set by us on our pool TrasMaMod. That means persons who mine over 300KH/s must reduce their mining speed, if not, they are miners we dont want on the pool, and will be banned.

This limit has nothing to do with the general mining in the network.
BUT: we encourages every pool owners to do similar as us.

mscoin

newbie

Activity: 5

Merit: 0

Quote from: malafaya on August 25, 2017, 05:19:38 PM

Quote from: mscoin on August 25, 2017, 05:16:47 PM

What means stratum_recv_line failed?

It probably means you're not connecting to the pool.
Do you have some kind of firewall on your side that could be blocking your connection to the pool?

I turn off all firewall and try on two networks and two different machines.

catfish78

newbie

Activity: 142

Merit: 0

Quote from: starmman on August 26, 2017, 02:27:50 AM

Welcome to the magi community catfish78,

To check to see if you are on the correct chain you can check the blockheight on this site
https://poolinfo.systms.org/#magi

Then check the blockheight in your wallet in the console by typing

Code:

getblockcount

they should be the same our at worst less than 10 out if your wallet is fully synchronised

Good luck with the mining

Thank You! Very simple way to check it!

I'm in the right track and got 2 blocks - very happy Grin

The Frisian

legendary

Activity: 1019

Merit: 1003

Senior Developer and founder of ViMeAv ICT

Quote from: erhanzeynel on August 26, 2017, 03:00:05 AM

Quote from: The Frisian on August 26, 2017, 02:51:42 AM

My wallet won't sync anymore?
Why?

I was same, what is yor wallet version?
If it's old one won't sync

Worked until midnight.

This morning it didn't work, so I deleted blockchain, peers, logs.
renamed wallet, to create new empty one. Replaced blockchain.
Restarted. No response.

Debug:
trying connection 104.128.225.215 lastseen=0.0hrs
connected 104.128.225.215
send version message: version 71061, blocks=1451225, us=0.0.0.0:0, them=104.128.225.215:8233, peer=104.128.225.215:8233
socket closed
disconnecting node 104.128.225.215

It looks as the wallet goes directly to wrong blockchain.

gunka

full member

Activity: 378

Merit: 101

minerclaim.net

https://chainz.cryptoid.info/xmg/address.dws?946c3d4z8hVwJtcm8FgWg79FDvD49cr9Cb.htm

I do not understand why I was paid from the pool minerclaim.net, I did not plan to withdraw anything until the moment when the purse on the bittrex would work or I would not decide to transfer the
coins to my local coagle. What a spontaneous action from the pool. Neither confirmation came, nothing. Just the coins were gone and that's it. If they do not reach the stock exchange, what have I wasted my time?

In general, to withdraw funds, you need to enter a PIN code, by mail to make a confirmation. It turns out that these are all just words and nothing is ensured safety. Wanted to erase, they wanted to translate themselves.

Tell me how to be in this situation.

erhanzeynel

jr. member

Activity: 49

Merit: 1

Quote from: The Frisian on August 26, 2017, 02:51:42 AM

My wallet won't sync anymore?
Why?

I was same, what is yor wallet version?

If it's old one won't sync

Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 401. (Read 2375972 times)