[ANN] YACMiner - AMD GPU miner for Scrypt-Chacha, N-Scrypt, and Scrypt coins - page 5.

leopool

newbie

Activity: 4

Merit: 0

Quote from: hieu1010 on March 16, 2015, 11:54:12 AM

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 . Backup pool can't run correctly . Please fix it.

this works, doesnt change to nf16. use starttime with pool, not below where gpu paramethers are.

"pools" : [
   {
      "url" : "stratum+tcp://leopool.org:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   },
   {
      "url" : "stratum+tcp://leopool.net:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   }
]
,
"rawintensity" : "",
"worksize" : "",
"kernel" : "scrypt-chacha",
"lookup-gap" : "",
"buffer-size" : "",
"gpu-threads" : "1",
"gpu-engine" : "",
"gpu-memclock" : "",
"gpu-powertune" : "",
"auto-fan" : true,
"temp-cutoff" : "",
"temp-overheat" : "",
"temp-target" : "",
"no-submit-stale" : true,
"expiry" : "1",
"queue" : "0",
"scan-time" : "1",
"scrypt-chacha" : true
}

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: lpedretti on February 10, 2015, 09:42:00 AM

Any1 got good configs for NF15?
Seems that 950h/s is too low for an r9 280x (i have it undervolted to 0.95 at ~930 core 1375 mem)
I was expecting ~1.3kh/s

Best regards!

Drop your memclock to 1250 - and without a higher core, I doubt you'll get too far.

Grim

sr. member

Activity: 506

Merit: 252

Quote from: Thirtybird on April 18, 2015, 02:06:00 PM

Quote from: Wolf0 on April 18, 2015, 01:44:39 PM

Quote from: ?? on ??

OK Wolf0 I agree:
Weren't LEO developers, revealed to be lying?

No clue - I've barely heard of the coin.

Whether it is or isn't I couldn't tell you, but they've made some very bold statements that I chuckled at. People are mining it though, and the top 15 at the official pool have a combined reported 3,500 KHash/sec right now. If a decent card pulls 5 KH/sec, that's 700 GPUs in the top 15 at one pool...

The hashrate thrown at it is mind boggling Shocked

Thirtybird

hero member

Activity: 693

Merit: 500

Quote from: Wolf0 on April 18, 2015, 01:44:39 PM

Quote from: ?? on ??

OK Wolf0 I agree:
Weren't LEO developers, revealed to be lying?

No clue - I've barely heard of the coin.

Whether it is or isn't I couldn't tell you, but they've made some very bold statements that I chuckled at. People are mining it though, and the top 15 at the official pool have a combined reported 3,500 KHash/sec right now. If a decent card pulls 5 KH/sec, that's 700 GPUs in the top 15 at one pool...

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Working on this for 280X & 290X.

Thirtybird

hero member

Activity: 693

Merit: 500

Quote from: ?? on ??

Hey dudes,
What are you still mining that is NF-14 ??
Shocked

LEOCoin is the only coin at NF=14 I know about

lmaonade80

member

Activity: 124

Merit: 10

Quote from: hieu1010 on April 14, 2015, 12:45:12 AM

r9 270 - 3.17 Kh/s - core/mem 1150/500
7950 - 5.03 Kh/s - core/mem 1120/500

using kernel mod , bought from platinum4.

https://www.dropbox.com/s/wrc47a0u5lp8qm3/yacminer.jpg?dl=0

Link broken

hieu1010

newbie

Activity: 26

Merit: 10

r9 270 - 3.17 Kh/s - core/mem 1150/500
7950 - 5.03 Kh/s - core/mem 1120/500

using kernel mod , bought from platinum4.

meocon966

newbie

Activity: 15

Merit: 0

Quote from: Wolf0 on March 26, 2015, 09:06:18 PM

Assuming you're at stock clocks, you expect more?

I run with 1100- 1500 .
I think it have a litte speed when compare with 7950 and r9 280x. Speed should be ~ 3-3.5kh Sad

.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: king_pin on January 06, 2015, 12:18:40 PM

I acquired some GTX 750Ti 2GB but I can't seem to set them up properly.
The best I did was :

Code:

cudaminer.exe -a scrypt-jane:14 -o stratum+tcp -u user -p X -b 4096 -m 1 -i 0 -L 6 -l t96x1

Which gives me only around 2,5 kH/s they should be doing more than 3k at this freq.
GPU 1350MHz, MEM 1525MHz
I have 5 cards running on 8G of RAM

When I try settings like:

-l t60x2 -H 2 -m 1 -i 0 -L 4
-l t5x24 -H 2 -m 1 -i 0 -L 4

I get "Cuda error" than "Driver Error" or the machine freezes. Sad

Am I missing some command line like SETX....

I kind of doubt that a 750Ti can do 3kh/s+ on Nf 14, but it's possible, I suppose.

meocon966

newbie

Activity: 15

Merit: 0

Hello...
Anyone have config for r9 270...
I only get 2.6KHz per card with this config :
--scrypt-chacha --worksize 128 -g 1 --lookup-gap 8 --buffer-size 1648 -R 3200

soowein

newbie

Activity: 42

Merit: 0

Quote from: felix18yu on March 23, 2015, 10:13:30 AM

hello..
have someone good setup for sapphire 280x vapor-x for yacminer..
or some miner for scrypt-jane

Thanks

And me with the same question !

Thank you so much !

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: Namsbreh on January 04, 2015, 04:30:21 AM

Quote from: Wolf0 on January 01, 2015, 07:31:03 AM

Quote from: Namsbreh on January 01, 2015, 07:29:37 AM

Quote from: Wolf0 on January 01, 2015, 04:45:48 AM

Quote from: Namsbreh on January 01, 2015, 03:34:32 AM

750 ti 3.25 kh/s
970gtx 9.5 kh/s

And the bit the AMD whore is really interested in.....R9280X 4.2kh/s, HD7950 3.8kh/s

Is the 280X at stock clocks?

No, 1100 & 1500mem

Thanks.

How are you getting on with NF14........worked any of your magic yet?

What u got Freya hashing at?

4.72 - 4.73kh/s on 280X @ 1100/1500.

felix18yu

full member

Activity: 156

Merit: 100

hello..
have someone good setup for sapphire 280x vapor-x for yacminer..
or some miner for scrypt-jane

Thanks

Thirtybird

hero member

Activity: 693

Merit: 500

Quote from: hieu1010 on March 20, 2015, 06:48:27 AM

Hi , I'm mining scrypt jane N Factor =14
6970 speed 4.7 khs (core/mem 900/400)
7950 speed 4.2 khs (core/mem 1000/400)
Who can explain why 6970 run faster than 7950?

Post your configs for each - SC N=14 is memory intensive, so the faster GPU doesn't always win. Also, you may be having hardware errors you didn't mention (or notice)

hieu1010

newbie

Activity: 26

Merit: 10

Hi , I'm mining scrypt jane N Factor =14
6970 speed 4.7 khs (core/mem 900/400)
7950 speed 4.2 khs (core/mem 1000/400)
Who can explain why 6970 run faster than 7950?

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: Namsbreh on January 01, 2015, 07:29:37 AM

Quote from: Wolf0 on January 01, 2015, 04:45:48 AM

Quote from: Namsbreh on January 01, 2015, 03:34:32 AM

750 ti 3.25 kh/s
970gtx 9.5 kh/s

And the bit the AMD whore is really interested in.....R9280X 4.2kh/s, HD7950 3.8kh/s

Is the 280X at stock clocks?

No, 1100 & 1500mem

Thanks.

Thirtybird

hero member

Activity: 693

Merit: 500

Quote from: Wolf0 on March 16, 2015, 12:10:02 PM

Quote from: hieu1010 on March 16, 2015, 11:54:12 AM

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 . Backup pool can't run correctly . Please fix it.

I don't think YACMiner is actively developed anymore...

Correct, but I'm still here if something if hugely wrong...

Quote from: devlin on March 16, 2015, 12:15:43 PM

Quote from: hieu1010 on March 16, 2015, 11:54:12 AM

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 . Backup pool can't run correctly . Please fix it.

Is not a bug, use --nfmin --nfmax --starttime for each pool

agreed - these are set for each pool you specify

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: Namsbreh on January 01, 2015, 03:34:32 AM

750 ti 3.25 kh/s
970gtx 9.5 kh/s

And the bit the AMD whore is really interested in.....R9280X 4.2kh/s, HD7950 3.8kh/s

Is the 280X at stock clocks?

hieu1010

newbie

Activity: 26

Merit: 10

Quote from: devlin on March 16, 2015, 12:15:43 PM

Is not a bug, use --nfmin --nfmax --starttime for each pool

Thanks

. It's ok

Topic: [ANN] YACMiner - AMD GPU miner for Scrypt-Chacha, N-Scrypt, and Scrypt coins - page 5. (Read 47386 times)