N-factor change today. Do I have to change my settings for the r7 240 4GB, are there some new magical settings?
LG=3 and buffer-size over 3420
Topic: [ANN] YACMiner - AMD GPU miner for Scrypt-Chacha, N-Scrypt, and Scrypt coins - page 9. (Read 47386 times)
May 31, 2014, 07:42:01 PM
LG=3 and buffer-size over 3420
May 31, 2014, 01:29:42 PM
N-factor change today. Do I have to change my settings for the r7 240 4GB, are there some new magical settings?
May 21, 2014, 06:50:22 AM
Thanks,
Will try that tonight and will report if succesfull.
Will try that tonight and will report if succesfull.
May 21, 2014, 05:34:24 AM
any experience with 290x ?
I cannot get it to work properly for YAC's higher n-factor. We get too many HW errors (more than accepted shares)
Works superb with MRC's 11 N factor, but for YAC we cannot get it right.
I cannot get it to work properly for YAC's higher n-factor. We get too many HW errors (more than accepted shares)
Works superb with MRC's 11 N factor, but for YAC we cannot get it right.
Try any of these settings:
--buffer-size 3712 --lookup-gap 4 -R 3712 -g 1 -w 256
or
--buffer-size 3712 --lookup-gap 8 -R 7424 -g 1 -w 256
Start from there and move up or down the -R value in 64 increments till you get 0 HW.
May 21, 2014, 03:18:19 AM
any experience with 290x ?
I cannot get it to work properly for YAC's higher n-factor. We get too many HW errors (more than accepted shares)
Works superb with MRC's 11 N factor, but for YAC we cannot get it right.
I cannot get it to work properly for YAC's higher n-factor. We get too many HW errors (more than accepted shares)
Works superb with MRC's 11 N factor, but for YAC we cannot get it right.
May 19, 2014, 11:16:00 PM
Not really...the 280x isn't too far behind, and neither is a gtx 750 ti at 3.5kh/s.
May 19, 2014, 08:36:43 PM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
Many Thanks !!! yes yacoin and I use thirtubirds build
Ok, try this:
-R 7424 --buffer-size 3712 -g 1 -w 256
What kind of hashrate were you getting on that card with those settings? What LG?
Oh forgot LG! lg 8...Close to 4kh/s with a mild oc.
I'm folding right now, curecoin where it's at for miners. (or yacoin
but I prefer to buy atm)Wow, all those extra shaders really do NOT buy you much...
May 19, 2014, 09:37:36 AM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
Many Thanks !!! yes yacoin and I use thirtubirds build
Ok, try this:
-R 7424 --buffer-size 3712 -g 1 -w 256
What kind of hashrate were you getting on that card with those settings? What LG?
Oh forgot LG! lg 8...Close to 4kh/s with a mild oc.
I'm folding right now, curecoin where it's at for miners. (or yacoin
but I prefer to buy atm) May 19, 2014, 08:58:29 AM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
Many Thanks !!! yes yacoin and I use thirtubirds build
Ok, try this:
-R 7424 --buffer-size 3712 -g 1 -w 256
What kind of hashrate were you getting on that card with those settings? What LG?
May 18, 2014, 09:02:30 PM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
Many Thanks !!! yes yacoin and I use thirtubirds build
Ok, try this:
-R 7424 --buffer-size 3712 -g 1 -w 256
May 17, 2014, 12:54:14 AM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
Many Thanks !!! yes yacoin and I use thirtubirds build
May 16, 2014, 04:03:15 PM
I'll experiment with mine if I get some spare time and get back to you.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
This is for yacoin, right?
Make sure you get thirtybird's updated yacminer build.
May 16, 2014, 05:23:38 AM
I use a R9 290 Saphire card and get only HW errors. Could anyone post a working config for this card please. I have 32GB RAM in my machine
April 29, 2014, 06:05:43 PM
I'm running the ASUS 2gb models.
April 29, 2014, 05:58:30 PM
1100/1000mhz here, you need special software or bios mods to get so high.
What cards are you running? My Sapphire R7 240s can be set to that level and above within yacminer. 1150 is as far as I have tried.My crappy sapphire cards had a top limit of 1040 or something like that, can't remember since I bios modded them long ago.
April 29, 2014, 05:51:18 PM
I am running 1100 / 1100 just fine yacminer on ubuntu. Everything is holding steady guys! Thanks again for the help.
April 29, 2014, 05:29:16 PM
1100/1000mhz here, you need special software or bios mods to get so high.
What cards are you running? My Sapphire R7 240s can be set to that level and above within yacminer. 1150 is as far as I have tried. April 29, 2014, 04:40:16 PM
1100/1000mhz here, you need special software or bios mods to get so high.
April 29, 2014, 08:54:14 AM
Ok so dropping the LG to 3 on --xintensity 32 --scrypt-chacha -g 1 --buffer-size 1708 I'm knocking around 2.2khs with a U of around 1.8 still...this is looking much better...thanks to both of you. Yes I plan on dropping some more RAM soon into this cpu/board but gotta make the money to do so. Thanks again!
You may get the occassional HW error with those settings FYI. But it's real close (hence why I recommended BS=1712). Don't forget to crank up the GPU and memory clock! My cards run between 1065 and 1100 GPU clock with 1000 memory clock on all of them.
April 28, 2014, 05:28:19 PM
Ok so dropping the LG to 3 on --xintensity 32 --scrypt-chacha -g 1 --buffer-size 1708 I'm knocking around 2.2khs with a U of around 1.8 still...this is looking much better...thanks to both of you. Yes I plan on dropping some more RAM soon into this cpu/board but gotta make the money to do so. Thanks again!
Jump to: