12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
Are you trolling or something? Every coin does that during launch... 
Topic: [ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation - page 131. (Read 271652 times)
March 15, 2014, 04:45:06 PM
March 15, 2014, 04:43:36 PM
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!!
No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% between launch and block 15,000 is modest.
March 15, 2014, 04:43:16 PM
your comments are wrong.
did you read the ann? KGW @ BLOCK 15,000.
There's no diff re-targeting based on block time until then.
did you read the ann? KGW @ BLOCK 15,000.
There's no diff re-targeting based on block time until then.
March 15, 2014, 04:42:31 PM
12718 blocks in 2 days? thats not 60 sec per block at all, there is premine, and the blocks are being generated per 6 seconds not 60, this coin is scam
12818 blocks, the time is there and do the maths, this coin's time per block is fake, 12 sec per block is the real time, im out, dont want to be in a scam coin anymore
why u think blockchain isn't posted?
March 15, 2014, 04:39:46 PM
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
Quote
Diff will be adjusted by KGW after block 15,000
Reading isn't really your thing is it? Still waiting on the apology to hrodeberht for calling him a thief when you were (once again) completely misinformed.
March 15, 2014, 04:38:19 PM
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!!
March 15, 2014, 04:38:04 PM
can anyone help me out with settings for sgminer for a r9 280x?
first time mining on this algo, and -g 4 makes the drivers crash
first time mining on this algo, and -g 4 makes the drivers crash
I use linux/bamt, but the settings have equivalent parameters in windows
{
"pools" : [
{
"url" : "stratum+tcp://hiro.suprnova.cc:3313",
"user" : "xxx.1",
"pass" : "x"
}
]
,
"intensity" : "18",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"gpu-engine" : "300-1050",
"gpu-fan" : "20-40",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.162",
"temp-cutoff" : "85",
"temp-overheat" : "82",
"temp-target" : "78",
"auto-fan" : true,
"failover-only" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"kernel" : "darkcoin",
"scrypt" : false,
"temp-hysteresis" : "3"
}
thread concurrency i got autodetect, the value is 10240
I dont know if this is good, i have sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s.
Have someone better values?
March 15, 2014, 04:37:43 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
Can you add an other worker and try it again with the same settings ?
Does it say "banned!" or are you just getting rejects ?
it said me worker temporarily banned
Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer
Try it with an other workername please.
My worker was banned, too...
Yes, there is probably an issue with X11, I'm looking into this.
As a work-around:
Create two workers, worker.1 and worker.2 and configure sgminer to use worker.2 as a failover when worker.1 is banned. (that should work with giving multiple -o switches.
March 15, 2014, 04:33:39 PM
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
March 15, 2014, 04:32:01 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
Can you add an other worker and try it again with the same settings ?
Does it say "banned!" or are you just getting rejects ?
it said me worker temporarily banned
Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer
Try it with an other workername please.
My worker was banned, too...
March 15, 2014, 04:25:31 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
Can you add an other worker and try it again with the same settings ?
Does it say "banned!" or are you just getting rejects ?
it said me worker temporarily banned
Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer
Try it with an other workername please.
March 15, 2014, 04:24:29 PM
can anyone help me out with settings for sgminer for a r9 280x?
first time mining on this algo, and -g 4 makes the drivers crash
first time mining on this algo, and -g 4 makes the drivers crash
March 15, 2014, 04:22:37 PM
12718 blocks in 2 days? thats not 60 sec per block at all, there is premine, and the blocks are being generated per 6 seconds not 60, this coin is scam
wait till kgw block.
March 15, 2014, 04:22:13 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
Can you add an other worker and try it again with the same settings ?
Does it say "banned!" or are you just getting rejects ?
it said me worker temporarily banned
March 15, 2014, 04:21:41 PM
Hi
just found this one, am I too late for some blocks solo-ing @ 1312Mh/s?
just found this one, am I too late for some blocks solo-ing @ 1312Mh/s?
March 15, 2014, 04:18:48 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
Can you add an other worker and try it again with the same settings ?
Does it say "banned!" or are you just getting rejects ?
March 15, 2014, 04:17:42 PM
12718 blocks in 2 days? thats not 60 sec per block at all, there is premine, and the blocks are being generated per 6 seconds not 60, this coin is scam
March 15, 2014, 04:15:51 PM
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread
my workers are having issues after ~30 minutes as well...
March 15, 2014, 04:11:28 PM
SuchPool will get on that coin shortly.
Our pool should be ready by the end of the day, we will post in here and have it added to the official websites/threads.
Stay tuned users for quality mining! We have good experience with the X11 hash since we have a large DarkCoin Pool.
Want to mine with peace of mind? You know where to go! SuchPool!
Our pool should be ready by the end of the day, we will post in here and have it added to the official websites/threads.
Stay tuned users for quality mining! We have good experience with the X11 hash since we have a large DarkCoin Pool.
Want to mine with peace of mind? You know where to go! SuchPool!
March 15, 2014, 04:10:21 PM
Change to the supernova pool. the one you use you will never earn hic according your hashspeed. Use this one from supernova.
In half an hour on benchpool i got 14 HIC with dual 280x. supernova pool around 2 min already 40 HIC ...
https://hiro.suprnova.cc/index.php
@cris1987. Sorry men, i'm not a thief and this is my one and only account. I just shared my experience with benchcryptopools, not more. And I'am trust to the other postings here that is an exploitable version of sgminer and is activly used on mentioned pool. I have just three postings because i use the search function and not post/ask for every bagatelle that is already answered.
@ocminer: I meant sph-sgminer and not sgminer. corrected my post. I compiled the newest version from git. Hopefully I did not get banned again. At moment it works. Kernel used was darkcoin and HW Errors: Zero and Reject was under 1 Percent.
@blandana: You mean me? Yes I use darkcoin kernel. The first 5 minutes it worked flawlessly before I get kicked. All values dropped to zero. Accpeted Hashrate and so on. But with newest version from git at moment is all o.k.
[edit]Version i use yet: 4.1.0-85-gccc7d-dirty (sph-sgminer from today [/edit]
Jump to: