I actually decided they are more valuable than that I am probably not going to sell. I apologize.
I sell only for 600 satoshi.
sure, all of us are going to pay u that hahaha, another thief founded here, dont buy him, market is cheaper
Topic: [ANN][0.8.6] Hirocoin - X11 - NGW - Secured Blockchain - Time Warp Limitation - page 129. (Read 271652 times)
March 15, 2014, 09:39:15 PM
March 15, 2014, 09:38:21 PM
I seem to be mining this okay with my R9 270X's..... Here is my bat file for anyone interested... Seem to be getting around the following on each card: 1.225M/976Kh/s.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\CRYPTO\SPH-SGMiner\sgminer.exe -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u xxxxxx.xxxxxx-p xxxxxxx --thread-concurrency 14208,14208,14208 -I 20,20,20-g 1 -w 256 --gpu-fan 85 --lookup-gap 2 --gpu-engine 1050,1050,1050 --gpu-memclock 1400,1400,1400 --gpu-powertune 20 --no-submit-stale
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\CRYPTO\SPH-SGMiner\sgminer.exe -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u xxxxxx.xxxxxx-p xxxxxxx --thread-concurrency 14208,14208,14208 -I 20,20,20-g 1 -w 256 --gpu-fan 85 --lookup-gap 2 --gpu-engine 1050,1050,1050 --gpu-memclock 1400,1400,1400 --gpu-powertune 20 --no-submit-stale
You probably don't need to run your fans at 85%. My 270x's stay around 60C with the fans at 30%, I just have it set to auto and I've never really seen them go up. You're probably just shortening your fans lives unnecessarily.
March 15, 2014, 09:34:19 PM
I actually decided they are more valuable than that I am probably not going to sell. I apologize.
March 15, 2014, 09:32:49 PM
March 15, 2014, 09:32:31 PM
I sell only for 600 satoshi.
sure, all of us are going to pay u that hahaha, another thief founded here, dont buy him, market is cheaper March 15, 2014, 09:29:41 PM
still buying, price of market buy, 250 satoshi each, if anyone want to sell im in market
March 15, 2014, 09:28:01 PM
I seem to be mining this okay with my R9 270X's..... Here is my bat file for anyone interested... Seem to be getting around the following on each card: 1.225M/976Kh/s.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\CRYPTO\SPH-SGMiner\sgminer.exe -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u xxxxxx.xxxxxx-p xxxxxxx --thread-concurrency 14208,14208,14208 -I 20,20,20-g 1 -w 256 --gpu-fan 85 --lookup-gap 2 --gpu-engine 1050,1050,1050 --gpu-memclock 1400,1400,1400 --gpu-powertune 20 --no-submit-stale
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\CRYPTO\SPH-SGMiner\sgminer.exe -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u xxxxxx.xxxxxx-p xxxxxxx --thread-concurrency 14208,14208,14208 -I 20,20,20-g 1 -w 256 --gpu-fan 85 --lookup-gap 2 --gpu-engine 1050,1050,1050 --gpu-memclock 1400,1400,1400 --gpu-powertune 20 --no-submit-stale
March 15, 2014, 09:26:59 PM
this is my sgminer config. someone else said the "-g" command made their computer freeze. On the other hand I'm not sure you want setx sync objects it makes my computer freeze but it tends to be different for everyone. Other than that I'm not too sure that's about as much as I can give you.
setx GPU_MAX_ALLOC_PERCENT 100
sgminer -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u person.worker -p password -g 4 -I 18 -w 128
setx GPU_MAX_ALLOC_PERCENT 100
sgminer -k darkcoin -o stratum+tcp://hiro.suprnova.cc:3313 -u person.worker -p password -g 4 -I 18 -w 128
March 15, 2014, 09:16:17 PM
does this work with sgminer I am getting 100% rejected..
March 15, 2014, 08:27:09 PM
are you guys getting WU under 1?
the pool reports my shares to be around 2500-3500 with 3x 290s
the pool reports my shares to be around 2500-3500 with 3x 290s
my 1 290 card WU at 0.033/m with 2,6Mh/s, and the pool shows 2,796.20 KH/s
March 15, 2014, 08:18:44 PM
are you guys getting WU under 1?
the pool reports my shares to be around 2500-3500 with 3x 290s
the pool reports my shares to be around 2500-3500 with 3x 290s
my 1 290 card WU at 0.033/m with 2,6Mh/s, and the pool shows 2,796.20 KH/s
March 15, 2014, 07:15:21 PM
are you guys getting WU under 1?
the pool reports my shares to be around 2500-3500 with 3x 290s
the pool reports my shares to be around 2500-3500 with 3x 290s
Yeah, WU not accurate on sgminer. Got some blocks though, so obviously working.
March 15, 2014, 06:58:03 PM
are you guys getting WU under 1?
the pool reports my shares to be around 2500-3500 with 3x 290s
the pool reports my shares to be around 2500-3500 with 3x 290s
March 15, 2014, 06:44:02 PM
One thing to take note of:
The pool "cheaters", as far as i understand they faked their hashrate towards the pool tricking the pool to accepting fake shares. But the pool would not find more blocks than its actual hashrate allowed for, so they cheated the miners on that pool out of their coins. Bad for the other miners, but they didnt cheat the coin and the network it self if anyone is under that impression. They didnt get any extra blocks cause of this, they got a disproportionate amount from the blocks that were found.
TLDR:
Bad for the pool and its miners, the coin itself should be relatively unharmed by this...
The pool "cheaters", as far as i understand they faked their hashrate towards the pool tricking the pool to accepting fake shares. But the pool would not find more blocks than its actual hashrate allowed for, so they cheated the miners on that pool out of their coins. Bad for the other miners, but they didnt cheat the coin and the network it self if anyone is under that impression. They didnt get any extra blocks cause of this, they got a disproportionate amount from the blocks that were found.
TLDR:
Bad for the pool and its miners, the coin itself should be relatively unharmed by this...
March 15, 2014, 06:28:35 PM
Exchange (https://https//nxt-e.com/default.aspx?m=hiro_btc/) is down and the other one has no trades. Anyone knows what was the last BTC/HIR price?
Bad link in the OP (https:// repeated) as Nxt-E is fine: https://www.nxt-e.com/default.aspx?m=hiro_btc
March 15, 2014, 06:26:27 PM
Exchange (https://https//nxt-e.com/default.aspx?m=hiro_btc/) is down and the other one has no trades. Anyone knows what was the last BTC/HIR price?
March 15, 2014, 06:14:18 PM
bug on http://benchcryptopools.myvnc.com/??? cheat share?
"anonymous 1,132,392 KHS"
with my 280X, 2.3 mhs, corrige pool plz,
"anonymous 1,132,392 KHS"
with my 280X, 2.3 mhs, corrige pool plz,
March 15, 2014, 06:00:53 PM
Sorry to hear that, possible another have an Idea and can help you. The last idea I have is that you could try to change/lower gpu and/or mem speed. With gpu speed 1070 mhz I have with scrypt as example significant lower hashspeed as with 1050. Hopefully you find a solution.
Which Brand/Model is your Card? Could someone post please his command line for a 280x card and share/WU? It would be interesting to know what we could reach with a 280x card.
Mine is ASUS R9280X-DC2T-3GD5 DirectCU II TOP (90YV0500-M0NA00)
sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s.
nah doesnt seem to work, only getting a total of 1mh/s with 2 r9 280x's
I use linux/bamt, but the settings have equivalent parameters in windows
{
"pools" : [
{
"url" : "stratum+tcp://hiro.suprnova.cc:3313",
"user" : "xxx.1",
"pass" : "x"
}
]
,
"intensity" : "18",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"gpu-engine" : "300-1050",
"gpu-fan" : "20-40",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.162",
"temp-cutoff" : "85",
"temp-overheat" : "82",
"temp-target" : "78",
"auto-fan" : true,
"failover-only" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"kernel" : "darkcoin",
"scrypt" : false,
"temp-hysteresis" : "3"
}
thread concurrency i got autodetect, the value is 10240
I dont know if this is good, i have sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s.
Have someone better values?
Which Brand/Model is your Card? Could someone post please his command line for a 280x card and share/WU? It would be interesting to know what we could reach with a 280x card.
Mine is ASUS R9280X-DC2T-3GD5 DirectCU II TOP (90YV0500-M0NA00)
sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s.
can anyone help me out with settings for sgminer for a r9 280x?
first time mining on this algo, and -g 4 makes the drivers crash
first time mining on this algo, and -g 4 makes the drivers crash
nah doesnt seem to work, only getting a total of 1mh/s with 2 r9 280x's
I use linux/bamt, but the settings have equivalent parameters in windows
{
"pools" : [
{
"url" : "stratum+tcp://hiro.suprnova.cc:3313",
"user" : "xxx.1",
"pass" : "x"
}
]
,
"intensity" : "18",
"api-listen" : true,
"api-allow" : "W:127.0.0.1",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"gpu-engine" : "300-1050",
"gpu-fan" : "20-40",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "1.162",
"temp-cutoff" : "85",
"temp-overheat" : "82",
"temp-target" : "78",
"auto-fan" : true,
"failover-only" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"kernel" : "darkcoin",
"scrypt" : false,
"temp-hysteresis" : "3"
}
thread concurrency i got autodetect, the value is 10240
I dont know if this is good, i have sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s.
Have someone better values?
March 15, 2014, 05:59:07 PM
thanks. any idea how often?
every 1440 blocks i think that was said by dev earlier
March 15, 2014, 05:57:55 PM
thanks. any idea how often?
Jump to: