what's your current block number? just need to confirm
What just happened to the new wallet you posted a few min ago and deleted? I downloaded it and it seams to work perfectly.
Topic: [ANN][1000 SYNC] Proof of Stake now run by BLOCKCHAIN DEVELOPMENT COMPANY - page 149. (Read 816006 times)
July 25, 2014, 05:59:19 PM
What just happened to the new wallet you posted a few min ago and deleted? I downloaded it and it seams to work perfectly.
July 25, 2014, 05:58:09 PM
getting bummed bought at 1.39 
Dont be. I still have a large portion and have not sold a single 1. This coin has huge potential to be above 10 BTC per SYNC. Normal markets go up and down and if you try to time it perfectly there is a good chance you will loose. Figure out if you think it will go up from here and buy. Once you think it is at it's highest you sell. Of course you will most likely not pick the exact bottom or top but give it time and if you have done research you should come out ahead in the long run.(Pending any big changes)
July 25, 2014, 05:57:04 PM
what's your current block number? just need to confirm
July 25, 2014, 05:56:47 PM
getting bummed bought at 1.39
no fear... this coin is going to go higher than anyone expected.
However.. do not invest anything you can't stand to lose completely so with that... keep the negativity to yourself.
All is good here SYNC is growing perfectly.
July 25, 2014, 05:56:16 PM
July 25, 2014, 05:55:39 PM
So to maximize the amount we get paid on a SYNC profit sale we need to hold all our coins under one registered address is that correct?
Is the only way to get all the various chunks of coins into a single address by sending everything to an exchange and back again? Or is there a way to doit directly in the wallet?
Is the only way to get all the various chunks of coins into a single address by sending everything to an exchange and back again? Or is there a way to doit directly in the wallet?
You have a slight misunderstanding. It's not that it's in one address, it's that it is in one BLOCK. There could be a million blocks in one address
It's actually quite easy to do, this doesn't even require the coin control features if you are putting all of your coins in one block. Generate a new receiving address, and send the balance of our coins to that address.
However, this doesn't really address staking, which is where coin control is very helpful. When the block stakes, it will combine the minted coins and the old coins into two roughly equal blocks. If you just leave it like that, it's no big thing, but if you want to again put it all in one block or split it different ways, (I prefer to have blocks coming mature over a spread of time, for instance) then the coin control features give you a great deal of , well, control over which coins are spent and how they are organized.
Hope that helps!
July 25, 2014, 05:46:15 PM
getting bummed bought at 1.39
July 25, 2014, 04:42:23 PM
Why is this coin -20% today 
climbing 35% from the bottom - for some People just an ability - and left real sellers just behind - be nice its Weekend
July 25, 2014, 04:40:19 PM
The block explorer is down...
but blockchain is working - last received block 83639 received 6 seconds ago
perhaps an update - or serverproblems while the error is from cloudflare
Yeah blockchain is absolutely fine... just saying the block explorer is down.
July 25, 2014, 04:38:22 PM
The block explorer is down...
but blockchain is working - last received block 83639 received 6 seconds ago
perhaps an update - or serverproblems while the error is from cloudflare
July 25, 2014, 04:34:21 PM
The block explorer is down...
July 25, 2014, 04:24:30 PM
Why is this coin -20% today
July 25, 2014, 04:20:45 PM
it probably begins he or she has found the bottom - amazing - whereever that Person is - congrats - great work
its fun to see there are Profis out there and bittrex is left behind - i often see this in the last years but whenever i look at this today it is real fun
its fun to see there are Profis out there and bittrex is left behind - i often see this in the last years but whenever i look at this today it is real fun
July 25, 2014, 03:58:49 PM
And now this...
https://twitter.com/CoinsSource/status/492750180362383360
Feel the tide turning again? Vote for it on Btc38
https://twitter.com/CoinsSource/status/492750180362383360
Feel the tide turning again? Vote for it on Btc38
That is a big change in score. It is their highest rating in many months for a coin.
July 25, 2014, 03:52:46 PM
nothing changed - while breakout appears first targets are 1.43 and 1.64
first one from above
and renewed
and be careful on mintpal is a Clown Playing hide and seek to prove where the bottom is
typical movement - often backed up by a large amount to buy - this will explode soon - so dont throw your Money away
nice Weekend - time to buy
first one from above
and renewed
and be careful on mintpal is a Clown Playing hide and seek to prove where the bottom is
typical movement - often backed up by a large amount to buy - this will explode soon - so dont throw your Money away
nice Weekend - time to buy
July 25, 2014, 03:20:48 PM
And now this...
https://twitter.com/CoinsSource/status/492750180362383360
Feel the tide turning again? Vote for it on Btc38
https://twitter.com/CoinsSource/status/492750180362383360
Feel the tide turning again? Vote for it on Btc38
July 25, 2014, 03:17:38 PM
To all the FUDders and naysayers....
http://www.altcointoday.com/?p=13698
https://twitter.com/SeilerSchindel/status/492744719097528320
Share it, spread it so we can get past all this BS and keep driving ahead. GO!
http://www.altcointoday.com/?p=13698
https://twitter.com/SeilerSchindel/status/492744719097528320
Share it, spread it so we can get past all this BS and keep driving ahead. GO!
July 25, 2014, 02:56:02 PM
Lots of clueless trolls out there fudding because they either didnt read the doc or know nothing about domain values. Or both.
View for yourself...
This week
http://dnjournal.com/domainsales.htm
This year
http://dnjournal.com/ytd-sales-charts.htm
Remember that probably 70% of domain sales are private and unreported, especially the really big sales like the $1m domain sale in March 2014. It was a private transaction.
So educate ppl on domain value, you'll be rewarded.
They'll get it soon enough, give them time.
View for yourself...
This week
http://dnjournal.com/domainsales.htm
This year
http://dnjournal.com/ytd-sales-charts.htm
Remember that probably 70% of domain sales are private and unreported, especially the really big sales like the $1m domain sale in March 2014. It was a private transaction.
So educate ppl on domain value, you'll be rewarded.
They'll get it soon enough, give them time.
July 25, 2014, 02:48:29 PM
often this works:
if it dont asks for "Firewall go through" you have done something wrong at the Installation
another try:
win 7 not working at win 8
save your wallet
delete this Folder:
C:\Users\"YourName"\AppData\Roaming\Sync
perhaps then restart your pc
redownload the wallet here
https://mega.co.nz/#!psYDQJBT!KM8qfYQc1G-6-lCOFhiQU64R0y_SMoEXzMog5NbVJE0
open it and wait 2 seconds (here win have to ask for the Firewall go through) - Close the wallet !!!!!!!
go to
C:\Users\"YourName"\AppData\Roaming\Sync
make a txt.file and rename it to Sync.conf
write in it:
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241 "this port have to be open on the router"
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58
and THEN restart the wallet by open sync-qt.exe
please try
if it dont asks for "Firewall go through" you have done something wrong at the Installation
another try:
win 7 not working at win 8
save your wallet
delete this Folder:
C:\Users\"YourName"\AppData\Roaming\Sync
perhaps then restart your pc
redownload the wallet here
https://mega.co.nz/#!psYDQJBT!KM8qfYQc1G-6-lCOFhiQU64R0y_SMoEXzMog5NbVJE0
open it and wait 2 seconds (here win have to ask for the Firewall go through) - Close the wallet !!!!!!!
go to
C:\Users\"YourName"\AppData\Roaming\Sync
make a txt.file and rename it to Sync.conf
write in it:
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241 "this port have to be open on the router"
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58
and THEN restart the wallet by open sync-qt.exe
please try
Seems like this is a fix for Win 7...Anyone know of fixes for Win 8?
Just tried to follow these instructions and didn't work (on Win 8 ). Also not getting the "firewall go through" message during installation.
Can anyone explain to me how to check to see if the correct port(s) are open??
Thanks.
try this http://www.hackingsec.in/2012/04/port-forward-in-windows-8.html
July 25, 2014, 02:30:48 PM
often this works:
if it dont asks for "Firewall go through" you have done something wrong at the Installation
another try:
win 7 not working at win 8
save your wallet
delete this Folder:
C:\Users\"YourName"\AppData\Roaming\Sync
perhaps then restart your pc
redownload the wallet here
https://mega.co.nz/#!psYDQJBT!KM8qfYQc1G-6-lCOFhiQU64R0y_SMoEXzMog5NbVJE0
open it and wait 2 seconds (here win have to ask for the Firewall go through) - Close the wallet !!!!!!!
go to
C:\Users\"YourName"\AppData\Roaming\Sync
make a txt.file and rename it to Sync.conf
write in it:
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241 "this port have to be open on the router"
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58
and THEN restart the wallet by open sync-qt.exe
please try
if it dont asks for "Firewall go through" you have done something wrong at the Installation
another try:
win 7 not working at win 8
save your wallet
delete this Folder:
C:\Users\"YourName"\AppData\Roaming\Sync
perhaps then restart your pc
redownload the wallet here
https://mega.co.nz/#!psYDQJBT!KM8qfYQc1G-6-lCOFhiQU64R0y_SMoEXzMog5NbVJE0
open it and wait 2 seconds (here win have to ask for the Firewall go through) - Close the wallet !!!!!!!
go to
C:\Users\"YourName"\AppData\Roaming\Sync
make a txt.file and rename it to Sync.conf
write in it:
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=24240
port=24241 "this port have to be open on the router"
addnode=23.226.225.224
addnode=107.170.10.33
addnode=80.240.140.149
addnode=86.1.252.20
addnode=90.217.94.252
addnode=207.12.89.92
addnode=162.243.157.49
addnode=128.199.189.163
addnode=162.243.103.7
addnode=128.199.187.204
addnode=95.85.31.58
and THEN restart the wallet by open sync-qt.exe
please try
Seems like this is a fix for Win 7...Anyone know of fixes for Win 8?
Just tried to follow these instructions and didn't work (on Win 8 ). Also not getting the "firewall go through" message during installation.
Can anyone explain to me how to check to see if the correct port(s) are open??
Thanks.
Jump to: