Good morning
I don't like the sound of this : " [PAYOUT ENABLED, withdraw at your own risk. - The PoW period is DONE. No coins can me mined anymore. Full PoS started on block 7200. STRATUMS STOPPED - THIS COIN POOL WILL BE TAKEN OFFLINE ON 2014-06-06] Sync.SuchPool.pw "
Not when SYNC could be lost in the black hole
I have 1/n of coin in the confirmed and 1/n of coin in the unconfirmed bin, what is worst that happen if I hit payout right now, or should I wait ?, community please advice, thx !
Topic: [ANN][1000 SYNC] Proof of Stake now run by BLOCKCHAIN DEVELOPMENT COMPANY - page 454. (Read 816010 times)
May 23, 2014, 06:58:48 AM
May 23, 2014, 06:58:33 AM
Why isn't any pool updating to the latest source? Where are you DedicatedPool, SuchPool, MinePit? 
Actually, dedicated updated a few hours ago. Not sure why they didn't post about it.
May 23, 2014, 06:55:10 AM
Thats what the dev stated, however these are blocks with 0 reward. they are there to have a "smoother" transition into PoS
May 23, 2014, 06:51:35 AM
Is it right? We will have another 1000 blocks?
May 23, 2014, 06:46:09 AM
Ok I managed to get a hold of Eth2 from suchpool.
He has re-enabled the Sync stratum.
So if you rather mine at a pool then a p2p point them at:
STRATUM 1: stratum+tcp://stratum1.suchpool.pw:3331
STRATUM 2: stratum+tcp://stratum2.suchpool.pw:3331
STRATUM EUROPE: stratum+tcp://stratum-eu.suchpool.pw:3331
He has re-enabled the Sync stratum.
So if you rather mine at a pool then a p2p point them at:
STRATUM 1: stratum+tcp://stratum1.suchpool.pw:3331
STRATUM 2: stratum+tcp://stratum2.suchpool.pw:3331
STRATUM EUROPE: stratum+tcp://stratum-eu.suchpool.pw:3331
OK!! Lets break this last block!
May 23, 2014, 06:44:37 AM
Ok I managed to get a hold of Eth2 from suchpool.
He has re-enabled the Sync stratum.
So if you rather mine at a pool then a p2p point them at:
STRATUM 1: stratum+tcp://stratum1.suchpool.pw:3331
STRATUM 2: stratum+tcp://stratum2.suchpool.pw:3331
STRATUM EUROPE: stratum+tcp://stratum-eu.suchpool.pw:3331
He has re-enabled the Sync stratum.
So if you rather mine at a pool then a p2p point them at:
STRATUM 1: stratum+tcp://stratum1.suchpool.pw:3331
STRATUM 2: stratum+tcp://stratum2.suchpool.pw:3331
STRATUM EUROPE: stratum+tcp://stratum-eu.suchpool.pw:3331
May 23, 2014, 06:44:05 AM
I set up multipool as my second priority pool in my bat file. Hopefully once the p2p stops mining POW then my miner will automatically go to the multipool . Is this logic correct?
Unfortunately not, unless the p2p owner takes down the pool after a block is found
Well then, this old fart had better skip her morning nap then lol :p
May 23, 2014, 06:43:35 AM
I pointed my 13 mhs to p2pool, hope it helps)))
May 23, 2014, 06:41:13 AM
I set up multipool as my second priority pool in my bat file. Hopefully once the p2p stops mining POW then my miner will automatically go to the multipool . Is this logic correct?
Unfortunately not, unless the p2p owner takes down the pool after a block is found
May 23, 2014, 06:39:23 AM
While we wait for the Dev's to do whatever they can please point some of your MH/s to:
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
ok try to help out as good as i can and switch all my workers (30mh/s) to the eu server.
please let us know when we can switch back to multipool -thanks
You can switch back instantly after new block is found, diff will drop then (when all is ok) and new blocks will be found fast.
At that moment the block chain moves and only limited hash is needed for a few hours max.
would appreciate if someone can set a message on op or multipool website if we can switch back.
have to go away for some hours and it would be nice to find the info in a easy way after my return - tx
I set up multipool as my second priority pool in my bat file. Hopefully once the p2p stops mining POW then my miner will automatically go to the multipool . Is this logic correct?
May 23, 2014, 06:39:05 AM
Pointed some rigs to the p2p pool.
Might take a while to find a block at this diff
If some more people could point a few MH/s to the p2p that would be great!
Might take a while to find a block at this diff
If some more people could point a few MH/s to the p2p that would be great!
i have moved over to help you out... and myself too of course :p
throwing some hash towards the CA server now
May 23, 2014, 06:38:47 AM
PoW phase is over?
what worries me is that no more blocks arrive from the network. Hash hash rate dropped so badly that confirmation times have become unreasonable?
You are absolutely correct! Guess what? We are doing CPR right now!!
Please help by starting up some solomining or point your X11 miner to stratum+tcp://p2poolcoin.com:7474 -u itdoesntmatternow -p Anything
Until difficulty retargets....
May 23, 2014, 06:35:12 AM
Pointed some rigs to the p2p pool.
Might take a while to find a block at this diff
If some more people could point a few MH/s to the p2p that would be great!
Might take a while to find a block at this diff
If some more people could point a few MH/s to the p2p that would be great!
i have moved over to help you out... and myself too of course :p
May 23, 2014, 06:33:21 AM
While we wait for the Dev's to do whatever they can please point some of your MH/s to:
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
ok try to help out as good as i can and switch all my workers (30mh/s) to the eu server.
please let us know when we can switch back to multipool -thanks
You can switch back instantly after new block is found, diff will drop then (when all is ok) and new blocks will be found fast.
At that moment the block chain moves and only limited hash is needed for a few hours max.
would appreciate if someone can set a message on op or multipool website if we can switch back.
have to go away for some hours and it would be nice to find the info in a easy way after my return - tx
May 23, 2014, 06:26:18 AM
While we wait for the Dev's to do whatever they can please point some of your MH/s to:
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
ok try to help out as good as i can and switch all my workers (30mh/s) to the eu server.
please let us know when we can switch back to multipool -thanks
You can switch back instantly after new block is found, diff will drop then (when all is ok) and new blocks will be found fast.
At that moment the block chain moves and only limited hash is needed for a few hours max.
May 23, 2014, 06:26:03 AM
OK, so long as you know he hasn't jumped ship. I wish I could be less cynical but these last few days I've seen it all.
If you read the past hundreds of pages this dev is probably more active than any other coin out there....I'm not even sure how you could press the keys to form that sentence.
May 23, 2014, 06:25:41 AM
PoW phase is over?
what worries me is that no more blocks arrive from the network. Hash hash rate dropped so badly that confirmation times have become unreasonable?
May 23, 2014, 06:24:21 AM
http://sync.multipoolmining.com/
Displays lower hashrate on x11 than i got, why? I have about 50mh and site only display me 38-40mh.
Displays lower hashrate on x11 than i got, why? I have about 50mh and site only display me 38-40mh.
you can find it on http://multipoolmining.com/ instead of http://sync.multipoolmining.com/
Mine just went over its normal has rate for my rig....while it was 1 M below awhile ago. Something seems to be getting corrected.
Yes, we have been mainly working on the backend to get your hashes correctly registered and on adding mine coins. As soon as we are happy with all backend items we will work on a more consistent frontend.
(simple)Personal miner stats can be found at http://multipoolmining.com (My stats)
May 23, 2014, 06:21:28 AM
Why isn't any pool updating to the latest source? Where are you DedicatedPool, SuchPool, MinePit?
May 23, 2014, 06:15:09 AM
While we wait for the Dev's to do whatever they can please point some of your MH/s to:
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
P2Pool
EU server: http://p2poolcoin.com:7474
Canada Server: http://ca.p2poolcoin.com:7474
ok try to help out as good as i can and switch all my workers (30mh/s) to the eu server.
please let us know when we can switch back to multipool -thanks
Jump to: