Topic: [ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 100. (Read 272323 times)
September 29, 2017, 11:57:20 AM
@Keesdewit made a really great crypto and ended up limiting its use to Amsterdam
September 29, 2017, 02:47:00 AM
Masternodes AmsterdamCoin AMS setup Guide
Requirements
- static IP with open port 50020 for masternodes
STEP 1 : Prepairing controller wallet
1 - Open your main wallet where you have your coins
2 - Go to file tab / reception address
3 - Press button "New address" and enter "MN1" in Label
4 - Send to this address exactly 100000 AMS coins
5 - Wait for 6 confirmation of transaction and go to the Debug console
6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
#################################################################################################################################################
STEP 2 : open the .conf file and complete this:
It have format:
Save file
#################################################################################################################################################
STEP 3 : Starting masternodes
- Close and restart your wallet
- Go to Debug console and enter the command: masternode start
Thats all :-)
Requirements
- static IP with open port 50020 for masternodes
STEP 1 : Prepairing controller wallet
1 - Open your main wallet where you have your coins
2 - Go to file tab / reception address
3 - Press button "New address" and enter "MN1" in Label
4 - Send to this address exactly 100000 AMS coins
5 - Wait for 6 confirmation of transaction and go to the Debug console
6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
#################################################################################################################################################
STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=50020
masternode=1
masternodeprivkey=here you enter your masternode genkey
Save file
#################################################################################################################################################
STEP 3 : Starting masternodes
- Close and restart your wallet
- Go to Debug console and enter the command: masternode start
Thats all :-)
Thank you very much for this clear explanation. I will put this on the OP.
Thank you Keesdewit, I have 2 masternodes AMS and since the recent update of the wallet, the daily rewards are about 25 AMS.
I think AMS is under the radar for now, the upcoming listing on MASTERNODES.PRO should offer more visibility to AMS currency.
The price of a masternode today is good very cheap.
Long life AMS !
September 28, 2017, 08:31:04 PM
Amsterdam is at CryptoHub pool now!
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
Can I mine AMS on GPU? Nvidia?
....
Yes, man
how do we mine ams on nvidia gpus
September 28, 2017, 05:54:16 PM
Ok. The wallet is very slow. Does anyone have any nodes or the .conf file for wallet 3 that work? Not being lazy this time because I looked first. 
Part of the reason for the move is that because of sync issues. When i was trying to sync my old wallet someone suggested to close and reopen let it sync until it stops and close and reopen, and keep repeating until it's synced.
How are you planning on Mining by the way? Are there any pools up still for the old wallet? I would support it as well so that people can still move their coins before the swap is over, i have a miner that isn't doing anything.
September 28, 2017, 05:19:34 PM
Ok. The wallet is very slow. Does anyone have any nodes or the .conf file for wallet 3 that work? Not being lazy this time because I looked first.
Hi, man addnode=136.243.60.19:61510
addnode=149.210.193.140:61510
addnode=167.114.103.43:61510
addnode=178.158.146.102:61510
addnode=185.117.101.202:61510
addnode=188.93.22.202:61510
addnode=188.93.22.203:61510
addnode=213.108.119.84:61510
addnode=51.15.74.115:61510
addnode=68.71.58.226:61510
addnode=73.10.255.44:61510
addnode=81.169.178.19:61510
addnode=82.202.233.134:61510
addnode=85.172.55.183:61510
addnode=85.214.152.3:61510
addnode=85.236.191.153:61510
addnode=95.213.179.99:61510
Outstanding. Thank you very much. Hopefully I will have an Australian Masternode set up after this....
September 28, 2017, 10:53:35 AM
Ok. The wallet is very slow. Does anyone have any nodes or the .conf file for wallet 3 that work? Not being lazy this time because I looked first.
Hi, man addnode=136.243.60.19:61510
addnode=149.210.193.140:61510
addnode=167.114.103.43:61510
addnode=178.158.146.102:61510
addnode=185.117.101.202:61510
addnode=188.93.22.202:61510
addnode=188.93.22.203:61510
addnode=213.108.119.84:61510
addnode=51.15.74.115:61510
addnode=68.71.58.226:61510
addnode=73.10.255.44:61510
addnode=81.169.178.19:61510
addnode=82.202.233.134:61510
addnode=85.172.55.183:61510
addnode=85.214.152.3:61510
addnode=85.236.191.153:61510
addnode=95.213.179.99:61510
September 28, 2017, 07:53:22 AM
Ok. The wallet is very slow. Does anyone have any nodes or the .conf file for wallet 3 that work? Not being lazy this time because I looked first.
September 28, 2017, 06:51:12 AM
oossaa Once Xevan miner for nvidia appears I notify all users (perhaps I will add it to GUI miner) . XLR coin dev offers 0.3 BTC for that miner development. So if you know some c++ developer talk to him
September 28, 2017, 06:30:07 AM
Amsterdam is at CryptoHub pool now!
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
Can I mine AMS on GPU? Nvidia?
....
Yes, man
September 28, 2017, 06:25:52 AM
Hello Kees,
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Is there a link to the old quark wallet? If so I will mine the chain for us to sync the wallet quickly for the coinswap. Anyone else know? ( I take it that the swap is the Quark coin for the Xevan coin for the next 43 days)
_https://github.com/CoinProjects/AmsterdamCoin/releases
Release 3.1.0.0
Thank you man. I realise I was being lazy. Now mining the old chain to keep it moving for the public good. Xevan is a cool algo to move to.
September 28, 2017, 06:15:01 AM
Hello Kees,
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Is there a link to the old quark wallet? If so I will mine the chain for us to sync the wallet quickly for the coinswap. Anyone else know? ( I take it that the swap is the Quark coin for the Xevan coin for the next 43 days)
_https://github.com/CoinProjects/AmsterdamCoin/releases
Release 3.1.0.0
September 28, 2017, 05:31:10 AM
Hello Kees,
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Is there a link to the old quark wallet? If so I will mine the chain for us to sync the wallet quickly for the coinswap. Anyone else know? ( I take it that the swap is the Quark coin for the Xevan coin for the next 43 days)
September 28, 2017, 01:56:19 AM
Hello Kees,
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
Please send me bootstrap files for old wallet to sync the wallet. It seems to be wallet syncing over 15 hours but showing 9 weeks behind.
Please help!
September 28, 2017, 01:33:58 AM
Amsterdam is at CryptoHub pool now!
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
Modern pool with low fees in addition. Market will be opened soon!
You can mine AMS on CPU using CryptoHubGUIMiner
https://cryptohub.online/pools/
September 27, 2017, 07:39:55 PM
Anyone know what to do if wallet keeps crashing with error: failed reading from database.pcoins Tip best block is not correct. The block database is in an inconsistent state and may cause issues in the future. To force sart use -forcestart?
The answer would be to delete everything from the datadir except wallet.dat. Then start the wallet again and let it sync. It is caused by an error on your harddisk.
Its syncing, thanks kees
September 27, 2017, 05:17:51 PM
Thanks for the update keesdewit. Is there another mandatory wallet update needed for the payment fix?
I saw that you forked the PVIX android wallet. Are you already working on the mobile wallet?
I saw that you forked the PVIX android wallet. Are you already working on the mobile wallet?
September 27, 2017, 03:19:27 PM
I need help!
I have back up of wallet.dat file but my PC crash.
How can I restore my old wallet and then swap?
Please advise
I have back up of wallet.dat file but my PC crash.
How can I restore my old wallet and then swap?
Please advise
Hello,
To restore your wallet.dat:
1 / install AMS wallet on your new workstation.
2 / Copy your wallet.dat backup to the directory: \ users \ youraccount \ appdata \ amsterdam
3 / Start your AMS wallet, wait for full synchronization and see your AMS
Thank you very much!
Now I need bootstrap files for old wallets. It's syncing 9 weeks ago almost 2 hours
Do you have bootstrap files?
September 27, 2017, 01:27:08 PM
I stopped the wallet to launch with conf "staking=1" and error repeats
Why I need use "-reindex" every time?
Quote
Error loading block database.
Do you want to rebuild the block database now?
Do you want to rebuild the block database now?
Why I need use "-reindex" every time?
September 27, 2017, 12:44:30 PM
Mandatory update
Please update as soon as possible. This version contains preparements for the masternode payment fix:
AmsterdamCoin Core v4.1.0.0
- Update spork key (masternode payment enforcement preparation)
- Added checkpoint
Github: https://github.com/CoinProjects/AmsterdamCoin-v4/releases/tag/v4.1.0.0
Reminder to upgrade your wallet
September 27, 2017, 12:43:02 PM
Masternodes AmsterdamCoin AMS setup Guide
Requirements
- static IP with open port 50020 for masternodes
STEP 1 : Prepairing controller wallet
1 - Open your main wallet where you have your coins
2 - Go to file tab / reception address
3 - Press button "New address" and enter "MN1" in Label
4 - Send to this address exactly 100000 AMS coins
5 - Wait for 6 confirmation of transaction and go to the Debug console
6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
#################################################################################################################################################
STEP 2 : open the .conf file and complete this:
It have format:
Save file
#################################################################################################################################################
STEP 3 : Starting masternodes
- Close and restart your wallet
- Go to Debug console and enter the command: masternode start
Thats all :-)
Requirements
- static IP with open port 50020 for masternodes
STEP 1 : Prepairing controller wallet
1 - Open your main wallet where you have your coins
2 - Go to file tab / reception address
3 - Press button "New address" and enter "MN1" in Label
4 - Send to this address exactly 100000 AMS coins
5 - Wait for 6 confirmation of transaction and go to the Debug console
6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
#################################################################################################################################################
STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=50020
masternode=1
masternodeprivkey=here you enter your masternode genkey
Save file
#################################################################################################################################################
STEP 3 : Starting masternodes
- Close and restart your wallet
- Go to Debug console and enter the command: masternode start
Thats all :-)
Thank you very much for this clear explanation. I will put this on the OP.
Jump to: