can you add shares commited per gpu? my gpu nr 5 doesn't seem to be committing shares, but reports hashrate none the less.
I had to debug this by running Zminer
Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 140. (Read 148347 times)
January 24, 2018, 03:12:47 PM
January 24, 2018, 02:36:02 PM
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution.
What happens if you directly click on bminer.exe?
Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect.
If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs.
EDIT: same result with new 5.2.0 version.
Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you
I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing?
What are the outputs if you are running the executable directly?
No output. When I run bminer.exe in cmd window, it just pauses, then goes back to the prompt. When I double-click it, an empty console window briefly appears, then disappears.
Hello, the same here. When I run bminer.exe without parameters it pauses for a maybe half a second then quits to the console. No output. I've got Visual Studio 2017 installed, so the libraries you mentioned are in place. What could be missing? Windows 10 x64. I've got number of miners, no problems. Card configuration: MSI 1080 GamingX, MSI 1060 Armor 6G.
Which CPU are you using?
January 24, 2018, 02:24:15 PM
Please let me know your results for the 1070 ti's. Mine are now running 510 sols/s for 125W on dstm and would like to know if bminer can get better results. Thank you
Will do!
So far the miner reports 550 sols/s and nvidia inspector says about 133 watts, which seems to be on par with the slight increase on my previous 340 average, bu time to look at the data in detail.
edit:
What would be the miningpoolhub config for this?
bminer.exe -uri stratum://TDartDDD.workername:[email protected]:17023 -api 127.0.0.1:1880
pause
edit 2:
Just try adding a pause command after the arguments in your .bat file.
bminer -ArgumnentsHere -AndHere
pause
Edit:
run this for help with a list of available commands, pretty self explanatory lol
bminer -help
pause
Going to run some multi hour benchmarks on my 1070ti and my 980 individually on the competitive miners and hopefully put my mind at ease with these huge fluctuations and massive dips pool side.
you know, the problem isn't I don't know how to parameterize the miner, the problem is, that its output is none. And I've got the console open, so I don't need pause command
I even tried the latest version 5.2.0 and the -logfile=.\bminer.log parameter. The file is not created.Ooooh, I see what your getting at now, that is definitely beyond me, but if I experience something like that ill be sure to report!
January 24, 2018, 02:18:40 PM
What would be the miningpoolhub config for this?
January 24, 2018, 02:14:30 PM
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution.
What happens if you directly click on bminer.exe?
Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect.
If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs.
EDIT: same result with new 5.2.0 version.
Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you
I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing?
What are the outputs if you are running the executable directly?
No output. When I run bminer.exe in cmd window, it just pauses, then goes back to the prompt. When I double-click it, an empty console window briefly appears, then disappears.
Hello, the same here. When I run bminer.exe without parameters it pauses for a maybe half a second then quits to the console. No output. I've got Visual Studio 2017 installed, so the libraries you mentioned are in place. What could be missing? Windows 10 x64. I've got number of miners, no problems. Card configuration: MSI 1080 GamingX, MSI 1060 Armor 6G.
Just try adding a pause command after the arguments in your .bat file.
bminer -ArgumnentsHere -AndHere
pause
Edit:
run this for help with a list of available commands, pretty self explanatory lol
bminer -help
pause
Going to run some multi hour benchmarks on my 1070ti and my 980 individually on the competitive miners and hopefully put my mind at ease with these huge fluctuations and massive dips pool side.
you know, the problem isn't I don't know how to parameterize the miner, the problem is, that its output is none. And I've got the console open, so I don't need pause command
I even tried the latest version 5.2.0 and the -logfile=.\bminer.log parameter. The file is not created. January 24, 2018, 02:11:05 PM
Please let me know your results for the 1070 ti's. Mine are now running 510 sols/s for 125W on dstm and would like to know if bminer can get better results. Thank you
January 24, 2018, 01:57:27 PM
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution.
What happens if you directly click on bminer.exe?
Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect.
If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs.
EDIT: same result with new 5.2.0 version.
Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you
I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing?
What are the outputs if you are running the executable directly?
No output. When I run bminer.exe in cmd window, it just pauses, then goes back to the prompt. When I double-click it, an empty console window briefly appears, then disappears.
Hello, the same here. When I run bminer.exe without parameters it pauses for a maybe half a second then quits to the console. No output. I've got Visual Studio 2017 installed, so the libraries you mentioned are in place. What could be missing? Windows 10 x64. I've got number of miners, no problems. Card configuration: MSI 1080 GamingX, MSI 1060 Armor 6G.
Just try adding a pause command after the arguments in your .bat file.
bminer -ArgumnentsHere -AndHere
pause
Edit:
run this for help with a list of available commands, pretty self explanatory lol
bminer -help
pause
Going to run some multi hour benchmarks on my 1070ti and my 980 individually on the competitive miners and hopefully put my mind at ease with these huge fluctuations and massive dips pool side.
January 24, 2018, 01:46:32 PM
Just tried again for fun -- still doesn't start for me on Windows 10. Not from batch file, nor on its own with any command arguments.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
And that's with two different Windows 10 machines, one AMD Ryzen 7 1700, one intel i7 3770. Both with a GTX 1070.
Any way to debug this? I don't have anything strange running at the same time, as far as I can tell.
Just to confirm -- did you turn off windows defender? Windows Defender sometimes would deny the execution.
What happens if you directly click on bminer.exe?
Yes, I had tried disabling Windows Defender, despite it showing no indication that it cared about bminer.exe. Disabling Windows Defender had no effect.
If I double-click bminer.exe a cmd-style window appears for a couple seconds, then closes. It has no contents. There are no error messages or other outputs.
EDIT: same result with new 5.2.0 version.
Try installing Visual Basic libraries, .NET Framework libraries, and latest CUDA SDK. 99% it will fix this for you
I do some very basic, minimal compiling on these machines, such as compiling xmrig & xmr-stak. So I have the CUDA SDK, and some .NET/VB libraries. Can you suggest specifics on which ones I might be missing?
What are the outputs if you are running the executable directly?
No output. When I run bminer.exe in cmd window, it just pauses, then goes back to the prompt. When I double-click it, an empty console window briefly appears, then disappears.
Hello, the same here. When I run bminer.exe without parameters it pauses for a maybe half a second then quits to the console. No output. I've got Visual Studio 2017 installed, so the libraries you mentioned are in place. What could be missing? Windows 10 x64. I've got number of miners, no problems. Card configuration: MSI 1080 GamingX, MSI 1060 Armor 6G.
January 24, 2018, 12:30:27 PM
It would be nice to tweak the miner output a little, like make it more organized and readable. Also adding temperature and fan speed readouts would be nice.
January 24, 2018, 11:59:23 AM
same error:
relocation error: /home/mining/bminer/bminer: symbol _ZTTNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference
ubuntu 14.04 is not supported?
relocation error: /home/mining/bminer/bminer: symbol _ZTTNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEE, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference
ubuntu 14.04 is not supported?
January 24, 2018, 11:33:45 AM
My GTX 1060 jumped from 330 Sol/s to 340 Sol/s after updating... Definitely worth.
How did you achieve that speed, my 1060 only does 270~315 with a lot of power increase as it goes higher. pls show me how and thanks
January 24, 2018, 09:48:23 AM
Hi,
This doesn't work on my rig. I'm using DSTM for two months and no issues.
The dmesg shows me this message:
How to resolve this?
Ubuntu 16.0.4
nvidia-387.26-0ubuntu1
This doesn't work on my rig. I'm using DSTM for two months and no issues.
Code:
rig2:~/bminer$ ./bminer -uri $SCHEME://$USERNAME@$POOL
[INFO] [2018-01-23T19:14:56-05:00] Bminer: When Crypto-mining Made Fast (v5.2.0-4f20af3)
[INFO] [2018-01-23T19:14:56-05:00] Starting miner on devices [0 1 2 3 4]
[INFO] [2018-01-23T19:14:56-05:00] Connected to us1-zcash.flypool.org:3333
[INFO] [2018-01-23T19:14:56-05:00] Subscribed to stratum server
[INFO] [2018-01-23T19:14:56-05:00] Set nonce to 108ddde5b3
[INFO] [2018-01-23T19:14:56-05:00] Authorized
[INFO] [2018-01-23T19:14:56-05:00] Set target to 6abc74931804560e2db29defa7c64b37894160e5d022dbf97e6abc7493180400
[INFO] [2018-01-23T19:14:56-05:00] Starting miner on device 0...
[INFO] [2018-01-23T19:14:56-05:00] [D0] GPU check watchdog has started
[INFO] [2018-01-23T19:14:57-05:00] Started miner on device 0
[INFO] [2018-01-23T19:14:57-05:00] Starting miner on device 1...
[INFO] [2018-01-23T19:14:57-05:00] [D1] GPU check watchdog has started
[INFO] [2018-01-23T19:14:57-05:00] Received new job 63d5ec62c08965e842d3
[INFO] [2018-01-23T19:14:57-05:00] Started miner on device 1
[INFO] [2018-01-23T19:14:58-05:00] Starting miner on device 2...
[INFO] [2018-01-23T19:14:58-05:00] [D2] GPU check watchdog has started
[INFO] [2018-01-23T19:14:59-05:00] Started miner on device 2
[INFO] [2018-01-23T19:14:59-05:00] Starting miner on device 3...
[INFO] [2018-01-23T19:14:59-05:00] [D3] GPU check watchdog has started
[INFO] [2018-01-23T19:15:00-05:00] Started miner on device 3
[INFO] [2018-01-23T19:15:01-05:00] Starting miner on device 4...
[INFO] [2018-01-23T19:15:01-05:00] [D4] GPU check watchdog has started
[INFO] [2018-01-23T19:15:02-05:00] Started miner on device 4
[WARN] [2018-01-23T19:15:02-05:00] Miner died! It will be restarted soon...
The dmesg shows me this message:
Code:
rig2:~# dmesg
[99684.245823] traps: bminer[22778] trap invalid opcode ip:6f6a92 sp:7fa0b8ffe930 error:0
[99944.004193] traps: bminer[22900] trap invalid opcode ip:6f6a92 sp:7fc424dfe930 error:0
[99944.004389] traps: bminer[22880] trap invalid opcode ip:6f6a92 sp:7fc4f9110930 error:0
How to resolve this?
Ubuntu 16.0.4
nvidia-387.26-0ubuntu1
What CPU are you using?
AMD PHENOM II
January 24, 2018, 06:13:45 AM
Nice to see some competition in nVidia miner scene. Good work Bminer, keep it up.
Good work Bminer, keep it up. January 24, 2018, 03:31:53 AM
One of my machines stopped sending shares for some reason, miner reported hashing speeds in command prompt, but there were no "accepted share" messages and no hashrate on poolside, after manual miner restart all came back to normal. Can't give you any details because I didn't set up logging into a file, but I did it now, so if that happens again, I'll provide a log.
I had kind of the same problem (see my post above).Solved it with version 5.2.0.
But could be a completely different problem.
January 24, 2018, 02:58:02 AM
@realbminer , i had a minor issue with 5.1.0 on linux, one of the cards hang and bminer exited and didn't restart although the default setting is -watchdog=true, whats the deal here?
It is possible. When a card crashes you might have to reboot or even hard reboot to recover from hardware failures.
See https://www.bminer.me/faq/#bminer-crashed-and-it-cannot-be-restarted-until-rebooting-the-machine for detailed explanations.
January 24, 2018, 01:44:00 AM
Well, I've managed to solve my problem:
Did some tests, compared to DSTM.
Settings: 4x EVGA 1070Ti on 63%, core +200, mem +700
DSTM showed 2070 Sol/s. Average last 4h hashrate on Miningspeed 2060 Sol/s
Bminer 5.2.0, 2140 Sol/s. Average last 4h hashrate on Miningspeed 2130 Sol/s (0.2% rejected shares)
Looks very promising till now.
Thanks!
Code:
Get error: The semaphore timeout period has expired, resseting in 5 seconds.
Connection failed due to External host closed the connection"
by updating to 5.2.0Connection failed due to External host closed the connection"
Did some tests, compared to DSTM.
Settings: 4x EVGA 1070Ti on 63%, core +200, mem +700
DSTM showed 2070 Sol/s. Average last 4h hashrate on Miningspeed 2060 Sol/s
Bminer 5.2.0, 2140 Sol/s. Average last 4h hashrate on Miningspeed 2130 Sol/s (0.2% rejected shares)
Looks very promising till now.
Thanks!
January 23, 2018, 11:04:18 PM
Any advantages regarding Hashrate between 5.2 and 5.1? Actually i am running my 1070 Ti witch 500-510s, at60% PL, +260 Core, +595 Mem with 105-109 Power Consumption.
My GTX 1060 jumped from 330 Sol/s to 340 Sol/s after updating... Definitely worth.
January 23, 2018, 11:03:20 PM
Looks like a slight improvement on DTSM I tested using 3 1070's and 2 1070 ti's
DTSM 2474
Bminer 2530
DTSM 2474
Bminer 2530
January 23, 2018, 09:53:13 PM
i tried it for 7hrs, with dev fee on. i'll give it another shot.. but i have to say after 7hrs this miner was close to 70mh/s off the reported average rate. i even swapped it to an identical card with the same settings to make sure it wasn't that card. i'll see tomorrow what it says..
January 23, 2018, 09:52:36 PM
ok, will do that and report any adjustments. I've never had to do that with any other miner software so far...
But it doesn't really matter, because this is just a test anyway
Software reports hashrates are up from the other miner software that I've ran in comparison, but that really doesn't tell you anything, what counts is what the pools shows.
ps. can you talk to awesomeminer.com to see if they can support your miner - please??
But it doesn't really matter, because this is just a test anyway
Software reports hashrates are up from the other miner software that I've ran in comparison, but that really doesn't tell you anything, what counts is what the pools shows.
ps. can you talk to awesomeminer.com to see if they can support your miner - please??
Jump to: