[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 38.

cirlama

jr. member

Activity: 156

Merit: 1

Quote from: realbminer on February 28, 2019, 02:57:34 AM

Quote from: Kalyst69 on February 26, 2019, 04:19:01 AM

Quote from: cirlama on February 26, 2019, 01:36:54 AM

win 10 latest drivers grin on luxor.tech:
1070: about 7% less on 15.0.2 (4.01 G/s) vs 15.0.1 (4.27 G/s) @70% power load
1080ti: similar reduction on grin31, grin29 is not stable enough on both versions (hangs after a few hours)

Same bad results on 27 rigs with P106

How does the fidelity number look like? The reason why it is slightly slower is that we observed 1060 / 1070 have lower fidelity. As a result 15.0.2 trades a little bit of speed for more fidelity.

Can you please post the fidelity numbers before and after 15.0.2?

the 1070 was on v15.0.1 for 24 hours and fidelity is 1.005, 4.24 G/s on miner, 4.30 on grin.luxor.tech 24h hashrate,
switched this evening on v15.0.2, will update tomorrow

realbminer

member

Activity: 461

Merit: 49

Quote from: Kalyst69 on February 26, 2019, 04:19:01 AM

Quote from: cirlama on February 26, 2019, 01:36:54 AM

win 10 latest drivers grin on luxor.tech:
1070: about 7% less on 15.0.2 (4.01 G/s) vs 15.0.1 (4.27 G/s) @70% power load
1080ti: similar reduction on grin31, grin29 is not stable enough on both versions (hangs after a few hours)

Same bad results on 27 rigs with P106

How does the fidelity number look like? The reason why it is slightly slower is that we observed 1060 / 1070 have lower fidelity. As a result 15.0.2 trades a little bit of speed for more fidelity.

Can you please post the fidelity numbers before and after 15.0.2?

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: stzcze on February 27, 2019, 03:54:47 PM

Quote from: realbminer on February 27, 2019, 04:29:23 AM

Quote from: stzcze on February 25, 2019, 04:12:32 PM

Win 10pro 1809 4GB 6x1060 6GB - latest driver

mine AE, BEAM

14.3.1 - 0K

15.0.0 - error apphelp.dll

15.0.1 - unknown cuda error.... miner.exe

15.0.2 - unknown cuda error.... miner.exe

error apphelp.dll has been fixed in 15.0.1.
Would you please send the log and the command line for me to identify the problem?
Thanks

[FATA] [2019-02-27T21:52:32+01:00] CudaError: Unknown error: c:\Minery\BEAM\bminer-v15.0.2-4d8671d\bminer.exe
[WARN] [2019-02-27T21:52:32+01:00] Miner died! It will be restarted soon...

@echo OFF
REM Change the following address to your BEAM addr.
SET ADDRESS=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
SET USERNAME=%ADDRESS%.1060
SET POOL=beam-eu.sparkpool.com:2222
SET SCHEME=beam+ssl
START "Bminer: When Crypto-mining Made Fast" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880

This is the same error as here: https://bitcointalksearch.org/topic/m.49908778

stzcze

jr. member

Activity: 109

Merit: 1

Quote from: realbminer on February 27, 2019, 04:29:23 AM

Quote from: stzcze on February 25, 2019, 04:12:32 PM

Win 10pro 1809 4GB 6x1060 6GB - latest driver

mine AE, BEAM

14.3.1 - 0K

15.0.0 - error apphelp.dll

15.0.1 - unknown cuda error.... miner.exe

15.0.2 - unknown cuda error.... miner.exe

error apphelp.dll has been fixed in 15.0.1.
Would you please send the log and the command line for me to identify the problem?
Thanks

[FATA] [2019-02-27T21:52:32+01:00] CudaError: Unknown error: c:\Minery\BEAM\bminer-v15.0.2-4d8671d\bminer.exe
[WARN] [2019-02-27T21:52:32+01:00] Miner died! It will be restarted soon...

@echo OFF
REM Change the following address to your BEAM addr.
SET ADDRESS=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
SET USERNAME=%ADDRESS%.1060
SET POOL=beam-eu.sparkpool.com:2222
SET SCHEME=beam+ssl
START "Bminer: When Crypto-mining Made Fast" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880

cryptoyes

member

Activity: 297

Merit: 10

Lots and lots of "CopyEdges" and "malloc" errors when mining c31 with all all 15.x versions: 15.0.0, 15.0.1, 15.0.2

Can you please fix these? Linux version, gtx1070, gtx1070ti, gtx1080ti,

realbminer

member

Activity: 461

Merit: 49

Quote from: stzcze on February 25, 2019, 04:12:32 PM

Win 10pro 1809 4GB 6x1060 6GB - latest driver

mine AE, BEAM

14.3.1 - 0K

15.0.0 - error apphelp.dll

15.0.1 - unknown cuda error.... miner.exe

15.0.2 - unknown cuda error.... miner.exe

error apphelp.dll has been fixed in 15.0.1.
Would you please send the log and the command line for me to identify the problem?
Thanks

wheelz1200

legendary

Activity: 3752

Merit: 1415

Thanks, appreciate the feedback. Will make the upgrade tomorrow or so and check out the differences. Cheers

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

im still on 14.1 on win 1709 with a couple 1070s and a 1080ti, and 14.0 on Ubuntu with a 1080ti.

tried a couple later versions but these were the most stable and i generally value stability over speed.

leoragraves666

full member

Activity: 227

Merit: 100

Quote from: wheelz1200 on February 26, 2019, 03:14:25 PM

I haven't upgrade since 13.2 which I'm currently running on a couple 1080tis, 1070tis and some 1070s. Which version since 13.2 is everyone running on that I should upgrade to at this point. Any insight would be appreciated, thanks

Most will say 14, it seems to be the fastest, I say 15

wheelz1200

legendary

Activity: 3752

Merit: 1415

I haven't upgrade since 13.2 which I'm currently running on a couple 1080tis, 1070tis and some 1070s. Which version since 13.2 is everyone running on that I should upgrade to at this point. Any insight would be appreciated, thanks

topteam

newbie

Activity: 157

Merit: 0

Quote from: leoragraves666 on February 26, 2019, 04:46:18 AM

SMOS - 15.0.2 about 3-4% slower than 15.0

+1
back to 15.0.0

leoragraves666

full member

Activity: 227

Merit: 100

SMOS - 15.0.2 about 3-4% slower than 15.0

Kalyst69

jr. member

Activity: 147

Merit: 1

Quote from: cirlama on February 26, 2019, 01:36:54 AM

win 10 latest drivers grin on luxor.tech:
1070: about 7% less on 15.0.2 (4.01 G/s) vs 15.0.1 (4.27 G/s) @70% power load
1080ti: similar reduction on grin31, grin29 is not stable enough on both versions (hangs after a few hours)

Same bad results on 27 rigs with P106

cirlama

jr. member

Activity: 156

Merit: 1

Quote from: realbminer on February 25, 2019, 08:55:14 AM

We’re pleased to release Bminer 15.0.2.

The release improves the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

Please see https://www.bminer.me/releases/ for more details.

win 10 latest drivers grin on luxor.tech:
1070: about 7% less on 15.0.2 (4.01 G/s) vs 15.0.1 (4.27 G/s) @70% power load
1080ti: similar reduction on grin31, grin29 is not stable enough on both versions (hangs after a few hours)

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Quote from: mably on February 25, 2019, 04:35:26 PM

Our 2080 Tis rig still crashes after a few minutes, sometimes even after a few seconds.

Thank you for your feedback. We'll wait then a bit more before updating.

mably

sr. member

Activity: 381

Merit: 266

Quote from: JFoxOne on February 25, 2019, 09:52:52 AM

Quote from: realbminer on February 25, 2019, 08:55:14 AM

We’re pleased to release Bminer 15.0.2.

The release improves the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

Please see https://www.bminer.me/releases/ for more details.

Ok I guess this version also fixed the Cuckatoo31 issue for 1080 (crashed the rig after few minutes).

Thanks!

Our 2080 Tis rig still crashes after a few minutes, sometimes even after a few seconds.

stzcze

jr. member

Activity: 109

Merit: 1

Win 10pro 1809 4GB 6x1060 6GB - latest driver

mine AE, BEAM

14.3.1 - 0K

15.0.0 - error apphelp.dll

15.0.1 - unknown cuda error.... miner.exe

15.0.2 - unknown cuda error.... miner.exe

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Quote from: realbminer on February 25, 2019, 08:55:14 AM

We’re pleased to release Bminer 15.0.2.

The release improves the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

Please see https://www.bminer.me/releases/ for more details.

Ok I guess this version also fixed the Cuckatoo31 issue for 1080 (crashed the rig after few minutes).

Thanks!

Howardroid

newbie

Activity: 16

Merit: 0

@realbminer
Please improve zhash so i can stop using gminer lol. And thanks for the update

realbminer

member

Activity: 461

Merit: 49

We’re pleased to release Bminer 15.0.2.

The release improves the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

Please see https://www.bminer.me/releases/ for more details.

Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 38. (Read 148347 times)