[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1021.

altcore

newbie

Activity: 16

Merit: 0

Quote from: killakem on September 04, 2014, 04:32:05 AM

Hi Everyone,

Has anyone complete any testing around the best stagger size and plot side to use with dcct's linux plotter?

Also what Nonces/minute should i expect from an I7 920 8 Threads Over clocked to 3.8. Im getting 2300 Nonces/minute. This does not seem right as other guys with I5s and I7s are getting 3500 plus.

Please help

In Winfows or in Linux? Your stagger size?

killakem

sr. member

Activity: 378

Merit: 250

Quote from: Amph on September 04, 2014, 04:38:29 AM

Quote from: killakem on September 04, 2014, 04:32:05 AM

Hi Everyone,

Has anyone complete any testing around the best stagger size and plot side to use with dcct's linux plotter?

Also what Nonces/minute should i expect from an I7 920 8 Threads Over clocked to 3.8. Im getting 2300 Nonces/minute. This does not seem right as other guys with I5s and I7s are getting 3500 plus.

Please help

3500 is still too low, i'm at 1662 with a pentium haswell(no oc), with a i5, you should get 5k minimum

This was my suspicion. 2300 on an over clocked I7 is not right.

The disk its plotting on is just Sata connected disk.

I have tried various stagger sizes, using a very small stagger like 2000 got me upto to 3k.

If anyone can add some in depth information on this it will not only help me out, but will help the BURST community as a whole.

Thanks
Killa

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: killakem on September 04, 2014, 04:32:05 AM

Hi Everyone,

Has anyone complete any testing around the best stagger size and plot side to use with dcct's linux plotter?

Also what Nonces/minute should i expect from an I7 920 8 Threads Over clocked to 3.8. Im getting 2300 Nonces/minute. This does not seem right as other guys with I5s and I7s are getting 3500 plus.

Please help

3500 is still too low, i'm at 1662 with a pentium haswell(no oc), with a i5, you should get 5k minimum

btw , the miner will use new plot that has been added? or i must restart the miner?

killakem

sr. member

Activity: 378

Merit: 250

Hi Everyone,

Has anyone complete any testing around the best stagger size and plot side to use with dcct's linux plotter?

Also what Nonces/minute should i expect from an I7 920 8 Threads Over clocked to 3.8. Im getting 2300 Nonces/minute. This does not seem right as other guys with I5s and I7s are getting 3500 plus.

Please help

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: yellowduck2 on September 04, 2014, 02:18:19 AM

[WARN] [09/04/2014 15:16:37.428] [default-akka.actor.default-dispatcher-8] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:16:47.431] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:16:57.424] [default-akka.actor.default-dispatcher-6] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:17:07.441] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:17:17.429] [default-akka.actor.default-dispatcher-7] [akka
://default/user/$a/$b] null

i got this when trying to mine. I am using pool v2 , plotting and mining at the same time.

look at your ip, it could be wrong

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Quote from: apocalypsevn on September 04, 2014, 04:19:43 AM

Quote from: burstcoin on September 03, 2014, 10:48:32 PM

Quote from: apocalypsevn on September 03, 2014, 10:41:36 PM

Any one can tell me what is the "deadline" of the transaction in wallet?
24h? or lower?
I've sent some BURST to c-cex but can't receive them after 3h. Total transactions confirmed in wallet is 10+.
I'm a newbie.
Tks alot!

Deadline sets a max time limit on when a transaction can be included in a block.

So, how long can i receive them in the exchange? My balance (in exchange) has no change for 6 hours. And how can i check if it completed?
For testing:
1. I've sent 4 Burst ( 1+3 fee) from c-cex to my wallet -> OK. I receive them after a minute but the sender address is not my address ( it look like from the exchange).
2. I've sent 2 from my wallet to my c-cex address -> cannot receive ( 2 time).
3. I've sent 2 from my wallet to that address (Exchange address) -> nothing happened.
Coin in my wallet had been decrease 6.

What happened to me?
How can i sent coin to c-cex?
Thanks,

When you send coin on c-cex, you are sending coin to your wallet generated by c-cex, then c-cex will send this coin to their big wallet. Now, when you send 2 coin, the first transaction is 1 coin + 1 coin fee, and the second one is 0 coin + 1 coin fee! You have to send more than this.. I mean, if you send 100 coin + 1 coin fee from your wallet, you'll see 99 coin on your c-cex account! Have you understood?! If not I'll try to explain this better!

apocalypsevn

newbie

Activity: 14

Merit: 0

Quote from: burstcoin on September 03, 2014, 10:48:32 PM

Quote from: apocalypsevn on September 03, 2014, 10:41:36 PM

Any one can tell me what is the "deadline" of the transaction in wallet?
24h? or lower?
I've sent some BURST to c-cex but can't receive them after 3h. Total transactions confirmed in wallet is 10+.
I'm a newbie.
Tks alot!

Deadline sets a max time limit on when a transaction can be included in a block.

So, how long can i receive them in the exchange? My balance (in exchange) has no change for 6 hours. And how can i check if it completed?
For testing:
1. I've sent 4 Burst ( 1+3 fee) from c-cex to my wallet -> OK. I receive them after a minute but the sender address is not my address ( it look like from the exchange).
2. I've sent 2 from my wallet to my c-cex address -> cannot receive ( 2 time).
3. I've sent 2 from my wallet to that address (Exchange address) -> nothing happened.
Coin in my wallet had been decrease 6.

What happened to me?
How can i sent coin to c-cex?
Thanks,

HoldTheLine

member

Activity: 112

Merit: 10

Hey guys -

So I have it generating plots now on both 4TB drives but it is taking forever! Both drives are at 60GB~ after 3 hours Sad

It's gonna take over 5 days to fill 8TB at this stage.

Is there ANY way at all that I can get this to speed up? I am running a i5 3570k @ 4.6 GHZ with 8GB of DDR3-1866.

Some other questions:

- Will it slow down the generation if I set it to mine at the same time on both drives? Or is that the best and most profitable thing to do?

- If I stop the generation; can I just start it back up again later or do I have to change code in places?

- If I generate a 200GB plot for a start just to test, can I then go on to make another larger plot? i.e. can I have many of these plot files in the plot folder and they wll all be used by the miner - as opposed to having to use one massive 3.6 TB file?

- Lastly, Is there any way to get the job done with the GPU? I have a HD 7990 just sitting there and would love to get it working!

Side note: Is there are guide for running Linux on Windows and generating blocks using the faster Linux software? And if so, can i continue to use the generated file I have in my plots folder or must I start again?

Thanks so much!

sirdevil

member

Activity: 98

Merit: 10

Quote from: saverio on September 04, 2014, 03:44:10 AM

For two days I began to mine this coin, but there are some things I don't understand.

I see in the dashboard:
Balance: 10'566 BURST
Unconfirmed Balance: 10'566 BURST
Guaranteed Balance: 0 BURST
Effective Balance: 0 BURST

I see that 10'566 are composed by 566 fee.

Unconfirmed Balance often varies from 10'566 to 10'433 and then went to 10'000 then again at 10'400, is this normal?

Moreover from two days BURST are in Balance Unconfirmed but they have not gone never in Effective Balance. "Recent Transactions" shows "No transactions yet."

I have some problem or it should work in this way?

unconfirmed is not important...
check the thread... older older posts... only confirmed are important and you can neglect uncconfirmed

saverio

full member

Activity: 221

Merit: 100

For two days I began to mine this coin, but there are some things I don't understand.

I see in the dashboard:
Balance: 10'566 BURST
Unconfirmed Balance: 10'566 BURST
Guaranteed Balance: 0 BURST
Effective Balance: 0 BURST

I see that 10'566 are composed by 566 fee.

Unconfirmed Balance often varies from 10'566 to 10'433 and then went to 10'000 then again at 10'400, is this normal?

Moreover from two days BURST are in Balance Unconfirmed but they have not gone never in Effective Balance. "Recent Transactions" shows "No transactions yet."

I have some problem or it should work in this way?

yuk

full member

Activity: 224

Merit: 100

Quote from: cyberspacemonkey on September 04, 2014, 12:53:14 AM

Some scumbag hacked into my account and withdrew my funds, apparently my passphrase is too weak. Is there any way for me to change passphrase without having to replot my entire Hard Drive? Roll Eyes

i think you must replot all, cuz your adress is generated by passphrase.

do you post your ardress in the forum? (maybe asking help to configure plot or miner)
do you use some unofficial tool?

maybe this help

Prototyp

sr. member

Activity: 252

Merit: 250

Quote from: cyberspacemonkey on September 04, 2014, 03:17:11 AM

I'm trying to use the Linux plot generator which folder I have on an external NTFS hard drive, but when I type ./plot it gives me a "Permission Denied" error does anyone know how to fix this? Anyone know what might be causing the problem? I tried using "sudo" and "sudo su" with no luck. Any help would be greatly appreciated

Pls poste the fastab line for the mount.

theblazehen

full member

Activity: 194

Merit: 100

Quote from: cyberspacemonkey on September 04, 2014, 03:17:11 AM

I'm trying to use the Linux plot generator which folder I have on an external NTFS hard drive, but when I type ./plot it gives me a "Permission Denied" error does anyone know how to fix this? Anyone know what might be causing the problem? I tried using "sudo" and "sudo su" with no luck. Any help would be greatly appreciated

Use ntfs-3g, not kernel ntfs. kernel ntfs is read only

cyberspacemonkey

legendary

Activity: 1288

Merit: 1002

I'm trying to use the Linux plot generator which folder I have on an external NTFS hard drive, but when I type ./plot it gives me a "Permission Denied" error does anyone know how to fix this? Anyone know what might be causing the problem? I tried using "sudo" and "sudo su" with no luck. Any help would be greatly appreciated

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: yellowduck2 on September 04, 2014, 02:55:48 AM

question

is it necessary to run wallet when mining on pool v2 ?

Nope, you can ignore the errors.

yellowduck2

hero member

Activity: 868

Merit: 1000

question

is it necessary to run wallet when mining on pool v2 ?

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Quote from: ?? on ??

How many coins in circulation?

8500 * 10000

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: GH on September 04, 2014, 02:10:31 AM

Hi, I hope this was not answered before as it's hard for me to follow the complete thread at the current pace...

Regarding mining on the pool (v2):

The miner submits the found share(s) only AFTER it has finished checking all his plots, right?

If a new block arrives after he found a share, but before he could submit it (=reading was not finished), he will submit this/these share(s) after completing the run for the new block.
Are they credited as valid shares by the pool or are they discared as "stale"?
Does the result "share/s received" really only mean "received" or also "accepted and counted"?

Would be good to know as this happens quite often with larger amounts of plot data and not too performant miners.
I tried to figure it out by watching the sharecount in the pool stats, but it's quite hard because of PPLNS.

Thanks!

These actually haven't been asked before.

The block height is sent with each share, and stales are discarded.

share/s received only confirms that data was sucessfully received and dumped into the processing queue

If you often have difficulty reading through everything, you should try using larger stagger sizes or using dcct's optimize tool. You will get higher read speeds when using higher stagger sizes.

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Hi Dev!

Have you seen on #Bittrex (irc.freenode.net)?

(08:28) bittrex-rami: bittrex-richie has the burstcoin dev contacted you? How's the integration going on?
(08:29) problems with the code?
(08:41) <@bittrex-richie> Burst_: its not a problemw ith the code
(08:41) <@bittrex-richie> Burst_: we were just hoping they suportd the new NXT model which they dont
(08:42) ah
(08:42) so i guess it would be still a while then
(08:44) bittrex-richie: so i guess it would still take some time to get things worked out?
(08:51) <@bittrex-richie> shrug.. not sure yet..

Please go on irc and speak with them! It's the only way to contact them quickly! If they'll ask you BTC for adding Burst no problem, but first you have to know what they want! Community is here waiting for you! There are lot of big wallet dumping their coin on c-cex and no buy support.. Don't let your coin die!

yellowduck2

hero member

Activity: 868

Merit: 1000

[WARN] [09/04/2014 15:16:37.428] [default-akka.actor.default-dispatcher-8] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:16:47.431] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:16:57.424] [default-akka.actor.default-dispatcher-6] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:17:07.441] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null
[WARN] [09/04/2014 15:17:17.429] [default-akka.actor.default-dispatcher-7] [akka
://default/user/$a/$b] null

i got this when trying to mine. I am using pool v2 , plotting and mining at the same time.

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1021. (Read 2171085 times)