Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 938. (Read 2170895 times)
September 08, 2014, 09:05:19 AM
is it possible to import the key from one wallet to another? So that I have two keys in one wallet afterwards?
September 08, 2014, 09:04:42 AM
So just a q I have had trouble finding an answer to.
Plot generation... got it. No overlapping nonces.
So let's say I have three HDDs and I am too lazy to make that one big disk.
I could generate plots on each disk (keeping nonces unique).
Do I then solo mine three clients (one for each disk).
So for example I have :
d:\pocminer_v1\plots
e:\pocminer_v1\plots
f:\pocminer_v1\plots
If I were to pool mine, would I also need to run three clients... one on each disk?
Thank you!
Plot generation... got it. No overlapping nonces.
So let's say I have three HDDs and I am too lazy to make that one big disk.
I could generate plots on each disk (keeping nonces unique).
Do I then solo mine three clients (one for each disk).
So for example I have :
d:\pocminer_v1\plots
e:\pocminer_v1\plots
f:\pocminer_v1\plots
If I were to pool mine, would I also need to run three clients... one on each disk?
Thank you!
September 08, 2014, 09:03:51 AM
I have some equipment to throw at this as well, particularly the SHA, so I'm also interested in getting this working .
Well done! Everyone hop on the multi pool!!!
I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
Well done! Everyone hop on the multi pool!!!
I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
September 08, 2014, 09:03:24 AM
Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
Well done! Everyone hop on the multi pool!!!
I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
I just checked, and my ant that I pointed is mining away! Awesome, time to throw the other one there now! Then maybe some x gpus as well.
September 08, 2014, 08:55:28 AM
Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222
Well done! Everyone hop on the multi pool!!!
I hopped on, but for some reason my Antminers can't connect. I must be doing something wrong, but after reading the instructions a bunch of times, I'm certain i'm correct. I am reading back through to see if my question was already answered, thanks.
September 08, 2014, 08:48:09 AM
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some
Thank you
September 08, 2014, 08:37:39 AM
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
You need 1 burst in your wallet to register, go here http://burstfaucet.com/ to have some
September 08, 2014, 08:36:14 AM
Please can somone help me? When i try to register for pool mining " Burst Pool V2" i put my passphrase and pool recipient, and after i hit submit, it say {"errorCode":5,"errorDescription":"Unknown account"} What is wrong? i open my wallet without problem? Also in my wallet where it say "No name set" when i try to make same name it also say "Unknown account" So can somone help me with this? Thanks in advance
September 08, 2014, 08:25:08 AM
2 x Intel Xeon
E5 2620V2
2 x (6 x 2,10 GHz)
128 GB REG ECC
1 Gbit/s port
is Enough?
E5 2620V2
2 x (6 x 2,10 GHz)
128 GB REG ECC
1 Gbit/s port
is Enough?
how many nonce per minute with those?
Nearly 10 000 i think, so nearly 6 days for 24tb
September 08, 2014, 08:21:51 AM
2 x Intel Xeon
E5 2620V2
2 x (6 x 2,10 GHz)
128 GB REG ECC
1 Gbit/s port
is Enough?
E5 2620V2
2 x (6 x 2,10 GHz)
128 GB REG ECC
1 Gbit/s port
is Enough?
how many nonce per minute with those?
September 08, 2014, 08:14:59 AM
It uses the current baseTarget to do the calculations, so: Not 100% accurate.
So with 24TB, how much you can earn in 24 hours?
So with 24TB, how much you can earn in 24 hours?
Roughly $50/day at current rates.
much more
0.15 btc aren't 50 dollars
About $ 57!
x 30 day = 1701$!
I have other solutions to be 36 or 72 tb! But first I want to try 24!
remenber!
you are not considering the difficulty increase!!!!
and the price fluctuation
September 08, 2014, 08:13:58 AM
It uses the current baseTarget to do the calculations, so: Not 100% accurate.
So with 24TB, how much you can earn in 24 hours?
So with 24TB, how much you can earn in 24 hours?
Roughly $50/day at current rates.
much more
0.15 btc aren't 50 dollars
About $ 57!
x 30 day = 1701$!
I have other solutions to be 36 or 72 tb! But first I want to try 24!
remenber!
you are not considering the difficulty increase!!!!
September 08, 2014, 08:12:13 AM
in this way you overlap 1 nonce per plot
Which ones?
The usb 3 overlap withe the usb2, usb 3 start before 2 end, but certainly forget to add a 0 when typing
EDIT : this is you're range so that's ok, i say nothing
September 08, 2014, 08:07:28 AM
Good question, i don't know if you miss some range like stop a 100 000 and start at 101 000, so you lost the 1000 between (i think that's what you want to know), what this make...
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
You dont need to have your plots in order. I do it this way:
USB1:
0 - 11000000
USB2:
100000000 - 111000000
USB3:
200000000 - 211000000
Each nonce has the same chances of finding a block, and there are 2^64 to choose from.
Ok good to know, finally the only thing to be carefull is not to be on the same range, that's great mainly if the plotting stop before the end on a disk, we can start at a much larger value for an other idsk to be sure
September 08, 2014, 08:06:54 AM
in this way you overlap 1 nonce per plot
Which ones?
September 08, 2014, 08:05:08 AM
Good question, i don't know if you miss some range like stop a 100 000 and start at 101 000, so you lost the 1000 between (i think that's what you want to know), what this make...
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
You dont need to have your plots in order. I do it this way:
USB1:
0 - 11000000
USB2:
100000000 - 111000000
USB3:
200000000 - 211000000
Each nonce has the same chances of finding a block, and there are 2^64 to choose from.
Thanks, this is what I was looking for.
September 08, 2014, 08:04:30 AM
It uses the current baseTarget to do the calculations, so: Not 100% accurate.
So with 24TB, how much you can earn in 24 hours?
So with 24TB, how much you can earn in 24 hours?
Roughly $50/day at current rates.
much more
0.15 btc aren't 50 dollars
About $ 57!
x 30 day = 1701$!
I have other solutions to be 36 or 72 tb! But first I want to try 24!
too risky imho, you need plenty of time to plot that, unless you have a xeon with 30 core at 3000mhz
Good question, i don't know if you miss some range like stop a 100 000 and start at 101 000, so you lost the 1000 between (i think that's what you want to know), what this make...
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
You dont need to have your plots in order. I do it this way:
USB1:
0 - 11000000
USB2:
100000000 - 111000000
USB3:
200000000 - 211000000
Each nonce has the same chances of finding a block, and there are 2^64 to choose from.
in this way you overlap 1 nonce per plot
2 x Intel Xeon
E5 2620V2
2 x (6 x 2,10 GHz)
128 GB REG ECC
1 Gbit/s port
is Enough?
September 08, 2014, 08:02:46 AM
I'm plotting in two different hard disk. I have 2 miners running in each hard disk with the same address and config. It should be alright, yes?
If you configure you're plotting well, one start at the end of the other, normally no problem
I have this as my config C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate LONGNUMBER 0 14400000 1000 4
Yes i m plotting 3.6TB straight.
I regret this decision already. But too late to stop it i guess, now at 1.2TB after 3 days 
September 08, 2014, 08:01:23 AM
Until ploting is not well finish, you can use the file generated, but with some error, in your case, that's normal to see this error if you're mining disappeared after 2 min, and if you plotting only two minutes, you don't have a lot to mine. So delete you"re ploting file, and restart ploting
I'm not sure I'm following... I set up everything from the beggining and I ran run_generate.bat and I got
Code:
H:\pocminer_v1>C:\Windows\System32\java.exe -Xmx1000m -cp pocminer.jar;lib/*;lib
/akka/*;lib/jetty/* pocminer.POCMiner generate 15824473913678550981 0 800000 200
0 2
Generating from nonce: 0
/akka/*;lib/jetty/* pocminer.POCMiner generate 15824473913678550981 0 800000 200
0 2
Generating from nonce: 0
Window closed after 2 minutes. Whats up?
Generated file is 0KB September 08, 2014, 07:59:59 AM
It uses the current baseTarget to do the calculations, so: Not 100% accurate.
So with 24TB, how much you can earn in 24 hours?
So with 24TB, how much you can earn in 24 hours?
Roughly $50/day at current rates.
much more
0.15 btc aren't 50 dollars
About $ 57!
x 30 day = 1701$!
I have other solutions to be 36 or 72 tb! But first I want to try 24!
too risky imho, you need plenty of time to plot that, unless you have a xeon with 30 core at 3000mhz
Good question, i don't know if you miss some range like stop a 100 000 and start at 101 000, so you lost the 1000 between (i think that's what you want to know), what this make...
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
If someone have the answer for that, i take it too, Certainly dcct know the answer
DCCT IF YOU'RE THERE!
You dont need to have your plots in order. I do it this way:
USB1:
0 - 11000000
USB2:
100000000 - 111000000
USB3:
200000000 - 211000000
Each nonce has the same chances of finding a block, and there are 2^64 to choose from.
in this way you overlap 1 nonce per plot
Jump to: