yup windows 7
EDIT, i am on the OP dev's miner and pool. maybe his is less buggy.
Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 955. (Read 2170895 times)
September 07, 2014, 02:33:07 PM
September 07, 2014, 02:32:37 PM
burst is dead, i lost so much money on this 
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
i'm speaking about the mem required with mining only not plotting, not talking about crashes(no crash for me, never)
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
No same problem for me, with two disk, one miner close automatically after a few times (sometimes 10min sometime 2 hours). For the moment, the only thing i found to let it run, it's to convert the .bat in a .exe and launch an app that allow to automatically restart the exe when crash....
Apparently, the biggest the disk his, more often the problem appear.
wait my problem is not that lol
my main problem is that my ram usage is too high, 6.5 GB with 3TB hd
Yep i understand that, but that the same for me, and after a moment, because i run two miner, one crash. (8gb memory and One disk with 1tb and other with 4tb)
im almost running 10tb with 5miners on a computer with 8gb of ram. and im still plotting more on the same computer. i dont understand how people have so much crashes
you are on windows? it's a problem with the miner it seems...
September 07, 2014, 02:30:04 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
i'm speaking about the mem required with mining only not plotting, not talking about crashes(no crash for me, never)
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
No same problem for me, with two disk, one miner close automatically after a few times (sometimes 10min sometime 2 hours). For the moment, the only thing i found to let it run, it's to convert the .bat in a .exe and launch an app that allow to automatically restart the exe when crash....
Apparently, the biggest the disk his, more often the problem appear.
wait my problem is not that lol
my main problem is that my ram usage is too high, 6.5 GB with 3TB hd
Yep i understand that, but that the same for me, and after a moment, because i run two miner, one crash. (8gb memory and One disk with 1tb and other with 4tb)
im almost running 10tb with 5miners on a computer with 8gb of ram. and im still plotting more on the same computer. i dont understand how people have so much crashes
September 07, 2014, 02:26:41 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
i'm speaking about the mem required with mining only not plotting, not talking about crashes(no crash for me, never)
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
No same problem for me, with two disk, one miner close automatically after a few times (sometimes 10min sometime 2 hours). For the moment, the only thing i found to let it run, it's to convert the .bat in a .exe and launch an app that allow to automatically restart the exe when crash....
Apparently, the biggest the disk his, more often the problem appear.
wait my problem is not that lol
my main problem is that my ram usage is too high, 6.5 GB with 3TB hd
Yep i understand that, but that the same for me, and after a moment, because i run two miner, one crash. (8gb memory and One disk with 1tb and other with 4tb)
September 07, 2014, 02:20:47 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
i'm speaking about the mem required with mining only not plotting, not talking about crashes(no crash for me, never)
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
No same problem for me, with two disk, one miner close automatically after a few times (sometimes 10min sometime 2 hours). For the moment, the only thing i found to let it run, it's to convert the .bat in a .exe and launch an app that allow to automatically restart the exe when crash....
Apparently, the biggest the disk his, more often the problem appear.
wait my problem is not that lol
my main problem is that my ram usage is too high, 6.5 GB with 3TB hd
September 07, 2014, 02:18:00 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
i noticed i actually plot faster using 3/4 of my cores. gotta leave some cpu to write the data onto the drive
edit... and cpu to write data onto the drive from other cpu's accross the network
September 07, 2014, 02:17:36 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
No same problem for me, with two disk, one miner close automatically after a few times (sometimes 10min sometime 2 hours). For the moment, the only thing i found to let it run, it's to convert the .bat in a .exe and launch an app that allow to automatically restart the exe when crash....
Apparently, the biggest the disk his, more often the problem appear.
September 07, 2014, 02:17:31 PM
i promise you 50% of every post in the thread is the same questions that get answered with the same answers probably by the same people
It's moving to damn fast. I tried the merge and followed the example but all that it did was flash on and off and I saw no results. I did a virus scan it it showed clean. Hope it is not a coin stealer!
Here is my bat:
Code:
cd plots
@for /r . %%g in (*_8191) do (
..\merge.exe %%~nxg
del %%~nxg
timeout /t 10
)
@pause
September 07, 2014, 02:15:39 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
I got mine resolved by dropping back to 7 cores and using java -Xmx1024m in the mining bat. No crashes since.
September 07, 2014, 02:14:13 PM
i promise you 50% of every post in the thread is the same questions that get answered with the same answers probably by the same people
September 07, 2014, 02:13:16 PM
Has there been any news on a windows version of dcct's Linux plotter? I know some time back he released an early version....
that "early" version works flawless
Wasn't it limited to 2GB of RAM usage in Windows?
it is, but I`ve plotted my files with a smaller stagger and then I used the merge utility to change it to 40960
windows merger app?
from where?
I only see a Linux version
https://bitcointalksearch.org/topic/m.8716332 here
I guess that I am blind or maybe cached out but there is no windows version on page 1 under linux version. Direct link please.
https://bitcointalksearch.org/topic/m.8714111
https://bitcointalksearch.org/topic/m.8627247
then follow guide to run in the firstlink I gave lol. this is what I mean in disarray like someone dioreah and spattered stuff everywhere
thanks for link to original page. i feel like im lost inside a foreign city trying to go back pages to find something
September 07, 2014, 02:11:30 PM
Has there been any news on a windows version of dcct's Linux plotter? I know some time back he released an early version....
that "early" version works flawless
Wasn't it limited to 2GB of RAM usage in Windows?
it is, but I`ve plotted my files with a smaller stagger and then I used the merge utility to change it to 40960
windows merger app?
from where?
I only see a Linux version
https://bitcointalksearch.org/topic/m.8716332 here
I guess that I am blind or maybe cached out but there is no windows version on page 1 under linux version. Direct link please.
https://bitcointalksearch.org/topic/m.8714111
https://bitcointalksearch.org/topic/m.8627247
then follow guide to run in the firstlink I gave lol. this is what I mean in disarray like someone dioreah and spattered stuff everywhere
thanks for link to original page. i feel like im lost inside a foreign city trying to go back pages to find something
its like heres a link..... or just go 247 pages ago... take a left and its the first noob second from the bottom post
September 07, 2014, 02:09:33 PM
Has there been any news on a windows version of dcct's Linux plotter? I know some time back he released an early version....
that "early" version works flawless
Wasn't it limited to 2GB of RAM usage in Windows?
it is, but I`ve plotted my files with a smaller stagger and then I used the merge utility to change it to 40960
windows merger app?
from where?
I only see a Linux version
https://bitcointalksearch.org/topic/m.8716332 here
I guess that I am blind or maybe cached out but there is no windows version on page 1 under linux version. Direct link please.
https://bitcointalksearch.org/topic/m.8714111
https://bitcointalksearch.org/topic/m.8627247
then follow guide to run in the firstlink I gave lol. this is what I mean in disarray like someone dioreah and spattered stuff everywhere
September 07, 2014, 02:07:18 PM
dang guys slow down i wokeup this mornign to a dozen pages to read!
so this merge tool does it just rename your plot files or does it acctualy optimize them for disc i/o?
place the merge.exe and the below in a .bat file, outside of your plots folder
Code:
cd plots
@for /r . %%g in (*_4096) do (
..\merge.exe %%~nxg
del %%~nxg
timeout /t 10
)
@pause
+ dropbox. com/s/g4xs48y0505lu0u/merge.exe?dl=0
so this merge tool does it just rename your plot files or does it acctualy optimize them for disc i/o?
Quote
place the merge.exe and the below in a .bat file, outside of your plots folder
Code:
cd plots
@for /r . %%g in (*_4096) do (
..\merge.exe %%~nxg
del %%~nxg
timeout /t 10
)
@pause
+ dropbox. com/s/g4xs48y0505lu0u/merge.exe?dl=0
September 07, 2014, 02:06:17 PM
burst is dead, i lost so much money on this
who let this guy in here?
September 07, 2014, 02:06:03 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
so we are the only ones to have the mem issue?
September 07, 2014, 02:06:00 PM
Has there been any news on a windows version of dcct's Linux plotter? I know some time back he released an early version....
that "early" version works flawless
Wasn't it limited to 2GB of RAM usage in Windows?
it is, but I`ve plotted my files with a smaller stagger and then I used the merge utility to change it to 40960
windows merger app?
from where?
I only see a Linux version
https://bitcointalksearch.org/topic/m.8716332 here
I guess that I am blind or maybe cached out but there is no windows version on page 1 under linux version. Direct link please.
https://bitcointalksearch.org/topic/m.8714111
September 07, 2014, 02:05:16 PM
burst is dead, i lost so much money on this
who let this guy in here?
September 07, 2014, 02:04:56 PM
burst is dead, i lost so much money on this
burst is not dead far from it. you only loose if you sell cheap. hold on to your coins. a lot will change these coming months im sure of it. September 07, 2014, 02:03:35 PM
burst is dead, i lost so much money on this
You should do a stand up comedy act so we can boo you.
Jump to: