[ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN - page 111.

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: raymonddaf on January 02, 2018, 10:45:45 AM

Where can i download the wallet as cannot see it on https://bulwarkcrypto.com/

The wallets are on github.com, the links are in the first post of this thread.

Quote from: LuxLP on January 02, 2018, 10:47:37 AM

stratum connection failed @ bsod.
Again?!

I've had constant "stratum connection interrupted" messages with the BSOD pool. Stopped mining with them because of those, my gpus would go idle every 5-15 minutes, and then reconnect again within a minute or so. I don't think that's healthy for the cards (temps suddenly drop and then rise again), so I switched to other pools (though I still see that message once in a while with others as well, but not as frequently as with BSOD).

LuxLP

newbie

Activity: 70

Merit: 0

stratum connection failed @ bsod.
Again?!

UPD it is working again. The other rig at the same internet connection kept working without problems.

raymonddaf

sr. member

Activity: 392

Merit: 250

Where can i download the wallet as cannot see it on https://bulwarkcrypto.com/

-Redacted-

hero member

Activity: 574

Merit: 501

I like that your project does not promise anything grande. Everything is clear and on the case. Dev what about are any bounty campaign?

manfromafar

full member

Activity: 390

Merit: 100

Quote from: manfromafar on December 01, 2017, 07:51:37 PM

Bulwark Added to PoolofD32th

http://yiimp.poolofd32th.club

Use your wallet address as your username, and c=BWK as your password.
No registration required.

Can be tested with:

Code:

-a nist5 -o stratum+tcp://yiimp.poolofd32th.club:3833 -u bUfF2tbX6RkhgWb635x7yCY7C463FBEEcv -p c=BWK
pause

Don't forget to use BWK as password, or your shares will be lost
Don't forget to change -u once testing is complete to mine to your wallet

TO GET FAST SUPPORT AND SHARE INFORMATION, JOIN OUR DISCORD

https://discord.gg/E2rThkk

*****NOTE*****
Updated to latest version
Happy mining

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: bspus on January 02, 2018, 09:41:46 AM

Quote from: profetul on January 02, 2018, 09:14:02 AM

so..broken blockchain?

No. Looks like a wallet from the pool misbehaved and has since been restarted. Blockchain is fine

It's not just "the pool" but multiple pools (at least BSOD, uMine and Altminer went down, which is most of the total network's hashrate). And they didn't just "misbehave", there was a bug in the wallet's code related to the masternode payout change at the block 28800.

What I don't understand though is whether it's still safe to use the windows qt wallet (which hasn't been updated so far). Devs didn't say a word here about this whole thing yet. Is it safe to use the current qt wallet, or should we wait for the new build?

iplayboy

newbie

Activity: 29

Merit: 0

Diff was down?

bspus

legendary

Activity: 2165

Merit: 1002

Quote from: profetul on January 02, 2018, 09:14:02 AM

so..broken blockchain?

No. Looks like a wallet from the pool misbehaved and has since been restarted. Blockchain is fine

UnZane

newbie

Activity: 40

Merit: 0

Quote from: profetul on January 02, 2018, 09:14:02 AM

so..broken blockchain?

Everything is working!!

profetul

newbie

Activity: 3

Merit: 0

so..broken blockchain?

bspus

legendary

Activity: 2165

Merit: 1002

Quote from: Eatbatterys on January 02, 2018, 04:26:00 AM

Quote from: bspus on January 02, 2018, 02:47:08 AM

Can someone help a bit with masternode configuration?

I already have the collateral transaction with lots of confirmations

I have set up the local node and in the masternode.conf I have all the info, privkey, txid, index etc. The masternode appears in the tab and the collateral is locked in the coin control inputs

Trying to start it fails as the masternode is not found. The remote node is on a public IP and reachable with port 52543 from the local node. I checked

Typing masternode status in remote node (from bulwark-cli) reports that Masternode not found in the list of available masternode. Hot node, waiting for confirmation.

in remote bulwark.conf I have

rpcuser=
rpcpassword
server=1
daemon=1
listen=1
masternode=1
masternodeprivkey=

The privkey was generated on the remote node and added in masternode.conf of the local node

Is something missing?

Hop in the discord and check out pinned messages in the masternodes channel.

Stu set up a script that will set up the masternode for you and do all the hard work. All you need to do is go to a website like vultr.com and set up a linux vps.

If you have any issues, there are usually plenty of people online that will be able to assist you in getting up and running.

If you're not able to find assistance for whatever reason, send me a private message in Discord and we'll link up tomorrow and I'll help walk you through the process.

I found the info on discord after all in an old message. Thanks to whoever pointed it out

It turns out the GUI button is broken. It must be done with a console command
startmasternode "all" 0 (or 1 depending on whether you want the wallet to lock immediately afterwards)

I hope this annoying bug gets fixed. It will be puzzling for many newcomers like me.

Seems to have activated now. Guess I'll know for sure when the first payment arrives

hashrefinery

member

Activity: 120

Merit: 11

Quote from: hashrefinery on January 02, 2018, 07:33:52 AM

Quote from: hashrefinery on January 02, 2018, 07:23:44 AM

Quote from: C00LM4N on January 02, 2018, 07:11:31 AM

Blockchain stuck at 28800

The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.

We've done a force shutdown and are re-indexing. Stay tuned..

Still failling with the same error..

Debug log says:

Code:

2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)

2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed

Need to wait for the devs to reply

We're up and running again. There was a bug in main.cpp checking for the block height at which the masternode payment changes.

awloelxf

newbie

Activity: 9

Merit: 0

Quote from: genthefirst on January 02, 2018, 08:16:20 AM

http://bsod.pw

Bulwark is online again!

Happy mining!

-a nist5 -o stratum+tcp://pool.bsod.pw:3833 -u YOURWALLETADDRESS.rigname -p c=BWK

And our rigs with you again

genthefirst

member

Activity: 215

Merit: 10

http://bsod.pw

Bulwark is online again!

Happy mining!

-a nist5 -o stratum+tcp://pool.bsod.pw:3833 -u YOURWALLETADDRESS.rigname -p c=BWK

lodrpr

newbie

Activity: 7

Merit: 0

I see BWK is back on BSOD .. @BSOD team, is it safe to mine again on your pool?

bskc

member

Activity: 87

Merit: 11

UniMining.net - EU Mining Pool

Dear Bulwark community,

UniMining.net is back again.

We are please to annouce that Bulwark mining is fixed on UniMining.net : Wallet code was updated.

If your wallet is stuck at block 28800, please update your wallet with the last version available on Bulwark github

https://unimining.net
No registration, Based in EU,
Low Fees and Fast Payout.

Stratum : pool.unimining.net
Dedicated Port : 3833 (nist5 Only)

For NVidia : we recommend you to use CCminer with following parameters :

Code:

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:3833 -u your_wallet -p c=BWK

Full instruction on our forum : UniMining Forum

Let's mine together!

Follow us on Twitter.com/unimining
or Discord UniMining
or feed-back on Official Announcement

Piarb

newbie

Activity: 45

Merit: 0

Quote from: hashrefinery on January 02, 2018, 07:33:52 AM

Quote from: hashrefinery on January 02, 2018, 07:23:44 AM

Quote from: C00LM4N on January 02, 2018, 07:11:31 AM

Blockchain stuck at 28800

The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.

We've done a force shutdown and are re-indexing. Stay tuned..

Still failling with the same error..

Debug log says:

Code:

2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
    CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
    CTxOut(nValue=40.00000000, scriptPubKey=1)
    CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)

2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed

Need to wait for the devs to reply

https://clip2net.com/clip/m534343/a172f-clip-57kb.jpg

Tpf0505

newbie

Activity: 26

Merit: 0

it's not a pool issue - devs have to fix masternode payment-change on block 28800 ( from specification: 10 to 12,5)

(from error log)
2018-01-02 12:27:42 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:27:42 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:27:42 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)

hashrefinery

member

Activity: 120

Merit: 11

Quote from: hashrefinery on January 02, 2018, 07:23:44 AM

Quote from: C00LM4N on January 02, 2018, 07:11:31 AM

Blockchain stuck at 28800

The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.

We've done a force shutdown and are re-indexing. Stay tuned..

Still failling with the same error..

Debug log says:

Code:

2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
    CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
    CTxOut(nValue=40.00000000, scriptPubKey=1)
    CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)

2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed

Need to wait for the devs to reply

matheussiq8

newbie

Activity: 81

Merit: 0

Following to see if these errors are solved.

Topic: [ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN - page 111. (Read 125735 times)