Topic: [ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN - page 110. (Read 125735 times)
January 02, 2018, 01:41:35 PM
If you look at above pic its missing block 29011 which bsod got. But it didnt register til 20-30 mintues later. And say if you were doing 100gh/s for example during block 29010 til 29013. But when block 29011 gets paid out thirty minutes later and youre at 1gh/s, you get paid on the 1gh/s. I hope you can understand what im saying.
January 02, 2018, 01:38:17 PM
Some blocks are missing from bsod.pw I wonder what that might be
Aren't those the blocks that BSOD did find? Meaning that BSOD is not going to find every block because of other pools finding them too.
Yes, but inbetween them there are 29010 and 29011, which are found to the same address. They appear later as found. But for example I am not credited for them :/
January 02, 2018, 01:36:57 PM
BSOD and UMINE have a lot in common as it seems. They mine to the same wallet bGoXwMd1ZuYxzeJKhdufmgqm7usBsAGZDH. Blocks 29000 and 29004. How can it be?
It's not rightuMine - baz91Tk7UjADwfPFRwyphBagG5gvvQz4hv
BSOD - bGoXwMd1ZuYxzeJKhdufmgqm7usBsAGZDH
Here is block 29004, mined to http://explorer.bulwarkcrypto.com/tx/87990faf59802c6abedffe85c5a9fa4274ca780b874e7d502b994160666b2fbc
January 02, 2018, 01:32:54 PM
Aren't those the blocks that BSOD did find? Meaning that BSOD is not going to find every block because of other pools finding them too.
January 02, 2018, 01:32:31 PM
BSOD and UMINE have a lot in common as it seems. They mine to the same wallet bGoXwMd1ZuYxzeJKhdufmgqm7usBsAGZDH. Blocks 29000 and 29004. How can it be?
It's not rightuMine - baz91Tk7UjADwfPFRwyphBagG5gvvQz4hv
BSOD - bGoXwMd1ZuYxzeJKhdufmgqm7usBsAGZDH
January 02, 2018, 01:26:29 PM
I dunno but i think we missing alot of blocks on bsod. Even though we had 95% of the hash. Gonna mine somewhere else for a while, losing alot of money.
January 02, 2018, 01:23:01 PM
BSOD and UMINE have a lot in common as it seems. They mine to the same wallet bGoXwMd1ZuYxzeJKhdufmgqm7usBsAGZDH. Blocks 29000 and 29004. How can it be?
January 02, 2018, 01:18:52 PM
Thanks to these "drop connection" all your shares - are your shares. It's common bug of all yiimp pools. After some time stratum starts "forgetting" some amount of shares and only reboot curing it now.
Meanwhile we're hardly working on new version of stratum
by the way, other pools "drop connection" or not?
Meanwhile we're hardly working on new version of stratum
by the way, other pools "drop connection" or not?
switched to UMINE and pool not drop connection almost 30 minutes.
i can't beleive
looks like a miracle after BSOD. btw, BSOD is a good name for project which crash so often.
January 02, 2018, 01:17:27 PM
Some blocks are missing from bsod.pw I wonder what that might be
January 02, 2018, 01:12:41 PM
As for the issues at block 28,800. It would seem that the panic was purely unfounded. There was just a big nethash drop off at that exact time which means less hash power solving a much more difficult block. If everybody was sleeping, it would have come and passed.
Regardless of the panic that seemed to have set it, it did come and pass, difficulty retargeted as designed, and everything was back to normal within an hour or so.
Regardless of the panic that seemed to have set it, it did come and pass, difficulty retargeted as designed, and everything was back to normal within an hour or so.
January 02, 2018, 01:10:05 PM
what you can recommend instead of bsod?
at this moment UMINE work more stable for me
altminer even worse than bsod hard to beleive but true
January 02, 2018, 01:06:42 PM
Blockchain stuck at 28800
The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.
We've done a force shutdown and are re-indexing. Stay tuned..
Debug log says:
Code:
2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
Need to wait for the devs to reply
Yes. Shit like this will happen when you simply clone a coin, not understand the code and pretend to be blockchain devs. Risky chain, careful y'all! Sell and move on, this project will be as bad as Signatum scam of 2017. It's the same team pre-Discord split, expect nothing less than a shit-show!
Really getting tired of this. I get it, you're a Straks fan boy. Go shill that coin somewhere instead of spouting off nonsense which you clearly know nothing about in our ANN thread. It does you no good and just makes you look stupid.
January 02, 2018, 12:44:12 PM
Blockchain stuck at 28800
The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.
We've done a force shutdown and are re-indexing. Stay tuned..
Debug log says:
Code:
2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
Need to wait for the devs to reply
Yes. Shit like this will happen when you simply clone a coin, not understand the code and pretend to be blockchain devs. Risky chain, careful y'all! Sell and move on, this project will be as bad as Signatum scam of 2017. It's the same team pre-Discord split, expect nothing less than a shit-show!
Ok so there was a wallet bug, ya doesnt look the best but blockchain devs have to start somewhere. But could you elaborate on this signatum split?
January 02, 2018, 12:32:25 PM
this is true, I also have a constant connection interrupt on BSOD pool, but not as frequent as you.. cca every 1 hour
bsod drop connection often its getting really annoying
i trying to swith to another pool managed with proffesionals
i highly not recommend using bsod it suck
Thanks to these "drop connection" all your shares - are your shares. It's common bug of all yiimp pools. After some time stratum starts "forgetting" some amount of shares and only reboot curing it now.
Meanwhile we're hardly working on new version of stratum
by the way, other pools "drop connection" or not?
January 02, 2018, 12:21:21 PM
i highly not recommend using bsod it suck
what you can recommend instead of bsod? January 02, 2018, 11:43:23 AM
this is true, I also have a constant connection interrupt on BSOD pool, but not as frequent as you.. cca every 1 hour
bsod drop connection often its getting really annoying
i trying to swith to another pool managed with proffesionals
i highly not recommend using bsod it suck
January 02, 2018, 11:32:53 AM
Blockchain stuck at 28800
The wallet was reporting an out of memory error to getblocktemplate requests (the server has plenty of free memory). It also wouldn't respond to a request to shutdown cleanly.
We've done a force shutdown and are re-indexing. Stay tuned..
Debug log says:
Code:
2018-01-02 12:32:12 CreateNewBlock(): total size 39631
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
2018-01-02 12:32:12 Masternode payment is out of drift range. Paid=10.00 Min=12.50
2018-01-02 12:32:12 CMasternodePayments::IsTransactionValid - Missing required payment of 12.50 to bQTUmkoJkXwBFhB9KqMT9iAEjgR4Eh8qS2
2018-01-02 12:32:12 Invalid mn payment detected CTransaction(hash=dc68ab0e9e, ver=1, vin.size=1, vout.size=2, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase 02817000)
CTxOut(nValue=40.00000000, scriptPubKey=1)
CTxOut(nValue=10.00000000, scriptPubKey=OP_DUP OP_HASH160 80a4efad7a98)
2018-01-02 12:32:12 ERROR: CheckBlock() : Couldn't find masternode/budget payment
2018-01-02 12:32:12 CreateNewBlock() : TestBlockValidity failed
Need to wait for the devs to reply
Yes. Shit like this will happen when you simply clone a coin, not understand the code and pretend to be blockchain devs. Risky chain, careful y'all! Sell and move on, this project will be as bad as Signatum scam of 2017. It's the same team pre-Discord split, expect nothing less than a shit-show!
January 02, 2018, 11:22:20 AM
WHat does this mean?
Don't forget to use BWK as password, or your shares will be lost !!!
What will be the difference if I set -p BWK? No the -p is empty in my batch file.
I don't think it's actually needed for the poolofd32th pool. Some pools mine multiple coins on the same port, for example look at the x11, scrypt and quark rows in the table on poolofd32th — there is more than 1 coin for each of those. So if you only want a particular coin out of the three x11 coins the pool is currently mining, then it's not enough to just specify -a x11 and the port in your miner batch file — you'll also want to somehow notify the pool about the actual coin you're after. That is done with the "-p c=BWK" parameter. Don't forget to use BWK as password, or your shares will be lost !!!
What will be the difference if I set -p BWK? No the -p is empty in my batch file.
As of right now though, poolofd32th is only mining one NIST5 coin, which is Bulwark. So it's not really required. But if the pool operator will later decide to mine another NIST5 coin on the same port, then that "-p c=BWK" will be required. So you might want to add this option now just to be safe in the future.
January 02, 2018, 11:10:04 AM
Bulwark Added to PoolofD32th
http://yiimp.poolofd32th.club
Use your wallet address as your username, and c=BWK as your password.
No registration required.
Can be tested with:
Don't forget to use BWK as password, or your shares will be lost
Don't forget to change -u once testing is complete to mine to your wallet
TO GET FAST SUPPORT AND SHARE INFORMATION, JOIN OUR DISCORD
https://discord.gg/E2rThkk
*****NOTE*****
Updated to latest version
Happy mining
http://yiimp.poolofd32th.club
Use your wallet address as your username, and c=BWK as your password.
No registration required.
Can be tested with:
Code:
-a nist5 -o stratum+tcp://yiimp.poolofd32th.club:3833 -u bUfF2tbX6RkhgWb635x7yCY7C463FBEEcv -p c=BWK
pause
pause
Don't forget to use BWK as password, or your shares will be lost
Don't forget to change -u once testing is complete to mine to your wallet
TO GET FAST SUPPORT AND SHARE INFORMATION, JOIN OUR DISCORD
https://discord.gg/E2rThkk
*****NOTE*****
Updated to latest version
Happy mining
WHat does this mean?
Don't forget to use BWK as password, or your shares will be lost !!!
What will be the difference if I set -p BWK? No the -p is empty in my batch file.
January 02, 2018, 10:57:22 AM
Where can i download the wallet as cannot see it on https://bulwarkcrypto.com/
The wallets are on github.com, the links are in the first post of this thread.stratum connection failed @ bsod.
Again?!
I've had constant "stratum connection interrupted" messages with the BSOD pool. Stopped mining with them because of those, my gpus would go idle every 5-15 minutes, and then reconnect again within a minute or so. I don't think that's healthy for the cards (temps suddenly drop and then rise again), so I switched to other pools (though I still see that message once in a while with others as well, but not as frequently as with BSOD).Again?!
this is true, I also have a constant connection interrupt on BSOD pool, but not as frequent as you.. cca every 1 hour
Jump to: