Author

Topic: [ANN][C2.1] Coin2 | Pow/PoS | ChainOfConflict[FPS] The Future of Gaming is Now - page 226. (Read 499723 times)

full member
Activity: 182
Merit: 100
42coin, you have just reached master level at loosing coins

Wtf is happening, any news on recovering those hard drives, you had bunch of dark coin?

Never know it might be a hint that I am going to get a mega jackpot...lol

All began with the office renovation. I try knock down 2 rooms to gain bigger office space. Everything fall apart.
Another reason may be not enough sleep to make sure my daughter's new night club in Montreal is on schedule open in the mid summer.

They're replacing the chips in those drive and hope recover some of the data, earliest date is on Friday depends the chips ordered.
My Prime concern are BTC. LC, and DC. The rest are not significant to me.
legendary
Activity: 1330
Merit: 1000
hero member
Activity: 676
Merit: 500
42coin, you have just reached master level at loosing coins

Wtf is happening, any news on recovering those hard drives, you had bunch of dark coin?
full member
Activity: 182
Merit: 100
I did try the rescan  but got these message



Do you have a backup of the wallet.dat file from before you sent the coins to Mintpal?
If so, you could try using that backup wallet & running the rescan on that.

I had the same issue that you have here a few weeks ago with a different wallet.
It seems they get their knickers in a twist like this sometimes ...
The only thing that worked for me (eventually) was to use the backup wallet, reload blockchain from scratch, then -rescan.


This is probably a good time to add...
Everybody should ensure they have a backup of their wallet.dat file BEFORE attempting to send in any C2.0 for redemption.
But as above, do not send coins for redemption until given the all-clear.
 




My wallet actually still have about 4k plus stuck in staking, after the rescan...my wallet not only got the meg above, entire wallet is 0.00 atm.
Nothing to lose now. I try use the backup wallet.dat replace the current experiment what you suggested... darn it...wallet seems stuck at 500 of 64893 ....
full member
Activity: 182
Merit: 100
lol King. Too late. Already done before you post such message

I think that I am much poorer by now.
Probably lost my 1.15 mil of C2 forever from the damage hard-drives, Lost some more from the idiot old fart brain sent to Mintpal...Only a tiny portion sent to Bittrex..but in pending due to the wallet issue...lol.
sr. member
Activity: 436
Merit: 250
I did try the rescan  but got these message



Do you have a backup of the wallet.dat file from before you sent the coins to Mintpal?
If so, you could try using that backup wallet & running the rescan on that.

I had the same issue that you have here a few weeks ago with a different wallet.
It seems they get their knickers in a twist like this sometimes ...
The only thing that worked for me (eventually) was to use the backup wallet, reload blockchain from scratch, then -rescan.


This is probably a good time to add...
Everybody should ensure they have a backup of their wallet.dat file BEFORE attempting to send in any C2.0 for redemption.
But as above, do not send coins for redemption until given the all-clear.
 


legendary
Activity: 1078
Merit: 1000
Everyone stop doing anything with your coins until we get the blockchain issue resolved, how many times do i gotta repeat myself
legendary
Activity: 1078
Merit: 1001
I did try the rescan  but got these message




The wallet stated still '0' confirmation. I followed the instruction... rescan.
Should I specific the number of coins? What's parameter.

oh wow! are serious, didn't you read King's post?  he said don't send to any exchanges except nxt-e and bittrex. not sure how his post was not clear. It was crystal!  

Oh no!

full member
Activity: 182
Merit: 100
OK. I see the confusion and would like to correct for the rest to avoid the SIN I committed.

COIN2 DEPOSIT TO EXCHANGES STARTS NOW

1) Only deposit if your coins are in a personal wallet
2) Do not try to move your coins from one exchange to another
3) Do not try to withdraw your coins after you deposit to an exchange.
4) Lets keep you god damn wallet stay open
5) You have til the end of the week.

ONLY BITTREX and e-NXT handle the coin swapping transitions



            
full member
Activity: 182
Merit: 100
I did try the rescan  but got these message




The wallet stated still '0' confirmation. I followed the instruction... rescan.
Should I specific the number of coins? What's parameter.
legendary
Activity: 1330
Merit: 1000
Darn it. Pretty confuse. So, how do I recall the coin sent to Mintpal?

If your transaction still has 0 confirmations, try using the method I posted a few posts up using -rescan.
This won't 'recall' the transaction, it should just update your wallet with the fact that that transaction was never confirmed.

If your transaction already has 1+ confirmations... You may need to wait and see what happens with Mintpal.

what the fucking going on.

always 0 confirmations
sr. member
Activity: 436
Merit: 250
Darn it. Pretty confuse. So, how do I recall the coin sent to Mintpal?

If your transaction still has 0 confirmations, try using the method I posted a few posts up using -rescan.
This won't 'recall' the transaction, it should just update your wallet with the fact that that transaction was never confirmed.

If your transaction already has 1+ confirmations... You may need to wait and see what happens with Mintpal.
sr. member
Activity: 406
Merit: 250
Darn it. Pretty confuse. So, how do I recall the coin sent to Mintpal?


Transactions on all exchanges are frozen except Nxt-e and Bittrex. They are the only available exchange for swapping. Your Mintpal deposit most probably lost forever unless Mintpal will re-enable the current C2 wallet before they swap to new C2. Mintpal probably won't do it in this case.

full member
Activity: 182
Merit: 100
Darn it. Pretty confuse. So, how do I recall the coin sent to Mintpal?
legendary
Activity: 1078
Merit: 1000
I dont know why you would be trying to send to other exchanges when i havent said to yet(mintpal, bter, polo, etc) only nxt-e and bittrex are availeble atm and as of right now everyone needs to stop trying to send coins til we figure out what is up with the block chain ok,


UdjinM6 check your messages man
full member
Activity: 182
Merit: 100
BTRE Depository still disable.

Bittrex Seems the only one working but with 'Pending Deposit' for sometime. No clue when will be clear.

Mintpal deposit never show up.

Coin2.0 wallet seems the problem?
sr. member
Activity: 436
Merit: 250
I deleted the blocks so it downloads a fresh blocks...lets see what happens.

For anyone wanting to reclaim "coins sent, but still with 0 confirmations", without re-downloading the blockchain...
This should recover unconfirmed sent coins back into the available balance (on windows)...

1. Open the C2.0 wallet.... Help > Debug Window > Console > 'RepairWallet' >> Recovered amount will be displayed in output.
2. Close the C2.0 wallet...
3. Open the c2.0 wallet with "-rescan" parameter *
4. The recovered coins should now be included in the available balance.

* Shortcut Example
"C:\Coin2.0\coin2.0-qt.exe" -rescan

* CMD Example
cd c:\Coin2.0
coin2.0-qt.exe -rescan



What happen already show up in the exchanges account with 'Pending' message, but in wallet stated '0' confirmation. Will this work? Will it mess up entire blockchain becoming double spend?

If you have a transfer 'Pending' for a long time, still with 0 confirmations, this should work fine. That is exactly why I did this myself just now.
The unconfirmed send transaction will stay in your transaction list... so if it does get confirmations, the wallet should update preventing ability to double spend.
full member
Activity: 182
Merit: 100
I deleted the blocks so it downloads a fresh blocks...lets see what happens.

For anyone wanting to reclaim "coins sent, but still with 0 confirmations", without re-downloading the blockchain...
This should recover unconfirmed sent coins back into the available balance (on windows)...

1. Open the C2.0 wallet.... Help > Debug Window > Console > 'RepairWallet' >> Recovered amount will be displayed in output.
2. Close the C2.0 wallet...
3. Open the c2.0 wallet with "-rescan" parameter *
4. The recovered coins should now be included in the available balance.

* Shortcut Example
"C:\Coin2.0\coin2.0-qt.exe" -rescan

* CMD Example
cd c:\Coin2.0
coin2.0-qt.exe -rescan



What happen already show up in the exchanges account with 'Pending' message, but in wallet stated '0' confirmation. Will this work? Will it mess up entire blockchain becoming double spend?
hero member
Activity: 618
Merit: 500
Go Bitcoin
i transferred 1coin from wallet A to wallet B and nothing happens...... hmmmmmmmm
legendary
Activity: 1078
Merit: 1000
ok everyone just hold off till this is figured out..have no idea what is going on cause i left to go eat dinner and come back to hell, lol
we will figure this out


FredDag +1 man
Jump to: