[ANN][CACH] CACHeCoin released based on scrypt-jane - page 79.

vertoe

hero member

Activity: 518

Merit: 505

Quote from: SamboNZ on March 01, 2014, 06:51:53 AM

Hey guys,

I'm thinking of doing some CACH mining but having trouble finding good estimates for profitability. What kind of returns are you guys getting (per MHs) and how does the whole nfactor thing affect profitability?

1 MH/s currently yields 6.734 CACH/day.
6.734 CACH = 0.0404 BTC = 1.65726 LTC = 22.63 USD at current rate.

The nfactor decreases hashrate due to higher memory requirements as far as I understand that.
Next two nfactors will kill GPU mining completely.

SamboNZ

sr. member

Activity: 1064

Merit: 253

Hey guys,

I'm thinking of doing some CACH mining but having trouble finding good estimates for profitability. What kind of returns are you guys getting (per MHs) and how does the whole nfactor thing affect profitability?

vertoe

hero member

Activity: 518

Merit: 505

Quote from: platinum4 on March 01, 2014, 02:56:49 AM

Even at Intensity 12 HW Errors rack up just not as fast.

Still can only get share difficulty below 0, so there's no way I can tell if I am getting any WU/m, it's Accepting shares but all are /0

Can I force a higher difficulty, or would mining on a normal pool change this...

there is no startum+tcp:// available, you might want to change to http://

which miner are you using? I 12 is the maximum that works for me. Some cards even only work with I 11.

Quote from: JAyThaRevo on March 01, 2014, 05:28:03 AM

Does P2P Pool support stratum?

No, Longpoll only.

JAyThaRevo

full member

Activity: 182

Merit: 100

Does P2P Pool support stratum?

platinum4

sr. member

Activity: 547

Merit: 250

Even at Intensity 12 HW Errors rack up just not as fast.

Still can only get share difficulty below 0, so there's no way I can tell if I am getting any WU/m, it's Accepting shares but all are /0

Can I force a higher difficulty, or would mining on a normal pool change this...

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: platinum4 on March 01, 2014, 01:49:34 AM

Connected to P2Pool, has a difficulty of 0?

It is accepting shares 77/0, 3/0, 11/0, but no WU/m, no A, no R, just increasing HW

How can I verify my P2Pool shares are being submitted?

My address does not show up on Payouts section of P2Pool.

CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM

Config for 2x R9 290x

Code:

{
"pools" : [
{
"url" : "stratum+tcp://p2pool.cachecoin.org:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://185.8.164.16:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://cach.cryptoprojects.eu:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://p2cache.syware.de:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://87.103.197.163:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://q30.qhor.net:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
}
],
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388949883",
"gpu-threads" : "1",
"worksize" : "128,128",
"intensity" : "13,13",
"gpu-engine" : "1029,1029",
"gpu-memclock" : "1500,1500",
"gpu-fan" : "60-100,60-100",
"gpu-powertune" : "20,20",
"thread-concurrency" : "24500,24500",
"vectors" : "1,1",
"lookup-gap" : "2,2",
"gpu-memdiff" : "0,0",
"gpu-vddc" : "0,0",
"auto-fan" : true,
"failover-only" : true,
"no-restart" : true,
"temp-cutoff" : "95,95",
"temp-overheat" : "93,93",
"temp-target" : "75,75",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "1",
"failover-only" : true,
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "1",
"temp-hysteresis" : "3",
"shares" : "0"
}

Please advise. Not sure if mining efforts are being acknowledged or not.

reduce intensity

platinum4

sr. member

Activity: 547

Merit: 250

Connected to P2Pool, has a difficulty of 0?

It is accepting shares 77/0, 3/0, 11/0, but no WU/m, no A, no R, just increasing HW

How can I verify my P2Pool shares are being submitted?

My address does not show up on Payouts section of P2Pool.

CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM

Config for 2x R9 290x

Code:

{
"pools" : [
{
"url" : "stratum+tcp://p2pool.cachecoin.org:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://185.8.164.16:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://cach.cryptoprojects.eu:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://p2cache.syware.de:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://87.103.197.163:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
},
{
"url" : "stratum+tcp://q30.qhor.net:8336",
"user" : "CGpHp7FPPggQ5uf4cHj5hQF6kbSiL3JAbM+0.00087310",
"pass" : "x"
}
],
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388949883",
"gpu-threads" : "1",
"worksize" : "128,128",
"intensity" : "13,13",
"gpu-engine" : "1029,1029",
"gpu-memclock" : "1500,1500",
"gpu-fan" : "60-100,60-100",
"gpu-powertune" : "20,20",
"thread-concurrency" : "24500,24500",
"vectors" : "1,1",
"lookup-gap" : "2,2",
"gpu-memdiff" : "0,0",
"gpu-vddc" : "0,0",
"auto-fan" : true,
"failover-only" : true,
"no-restart" : true,
"temp-cutoff" : "95,95",
"temp-overheat" : "93,93",
"temp-target" : "75,75",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "1",
"failover-only" : true,
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "1",
"temp-hysteresis" : "3",
"shares" : "0"
}

Please advise. Not sure if mining efforts are being acknowledged or not.

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: DeShack96 on February 28, 2014, 10:18:38 PM

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883 -o stratum+tcp://cach.catcoin.cz:3333 -u USERNAME.1 -p PASS --shaders 1792 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 --gpu-engine 1125 --gpu-memclock 1500 --temp-target 78

Why won't this work? I'm using cgminer 3.7.2, but I tried it in 3.7.3 and ybcminer, it just won't work Sad

can anyone help me set this up? (I'm running a 7950)

EDIT: I thought I had downloaded the sj version of cgminer, but I accidentally clicked on the mp version instead.

EDIT#2: So my computer runs it well for about 5 minutes, but then it crashes, every time I run it. The driver crashes, and I can't mine cachecoins using the sj cgminer. Can anyone help with this problem?

lower your intensity to around 12

DeShack96

member

Activity: 89

Merit: 10

Escrow Services Provided

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883 -o stratum+tcp://cach.catcoin.cz:3333 -u USERNAME.1 -p PASS --shaders 1792 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 --gpu-engine 1125 --gpu-memclock 1500 --temp-target 78

Why won't this work? I'm using cgminer 3.7.2, but I tried it in 3.7.3 and ybcminer, it just won't work Sad

can anyone help me set this up? (I'm running a 7950)

EDIT: I thought I had downloaded the sj version of cgminer, but I accidentally clicked on the mp version instead.

EDIT#2: So my computer runs it well for about 5 minutes, but then it crashes, every time I run it. The driver crashes, and I can't mine cachecoins using the sj cgminer. Can anyone help with this problem?

Snard

full member

Activity: 140

Merit: 100

Quote from: gristlelump on February 28, 2014, 02:32:48 PM

How do you determine the proper timestamp and why wouldn't the correct one be listed in the OP?

Its pretty well laid out for you in the How to Mine section of the op

singula

sr. member

Activity: 462

Merit: 251

Quote from: rdnkjdi on February 28, 2014, 10:15:45 AM

Anyway we can get http://pool.cachecoin.net? I have coins to withdraw Cry

There was some issue with stuck cronjobs few days ago, but the second pool is now running fine again and the monitoring was improved, so if such thing happens again (unlikely, though), it will be noticed much sooner

If you have any problems with the pool, write a PM - at worst case I can send you your coins manually

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: katoman on February 28, 2014, 05:22:02 PM

Sorry for the newbie questions....

In the start there is a Cach wallet config...
I have tryed google and the forum here, but cant see what i have to use that for...

Code:
rpcuser=
rpcpassword=
rpcallowip=192.168.*.*
rpcallowip=127.0.0.1
server=1
rpcport=2224
addnode=207.30.158.106
addnode=78.46.66.139

That is mostly useful if you are solo mining or using the wallet for other services. Normally you wouldn't need a config for cachecoin

katoman

newbie

Activity: 12

Merit: 0

Sorry for the newbie questions....

In the start there is a Cach wallet config...
I have tryed google and the forum here, but cant see what i have to use that for...

Code:
rpcuser=
rpcpassword=
rpcallowip=192.168.*.*
rpcallowip=127.0.0.1
server=1
rpcport=2224
addnode=207.30.158.106
addnode=78.46.66.139

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: gristlelump on February 28, 2014, 02:32:48 PM

Quote from: Snard on January 20, 2014, 05:47:35 PM

Quote from: jasinlee on January 20, 2014, 05:14:50 PM

Heh I appreciate your enthusiasm. I meant someone that is not the one that did the compile.

Jasin, I have been using this for the past 10 days or so.

http://rmdavidson.blogspot.com/2014/01/cgminer-372-scrypt-jane-patch-windows.html

Run it with the following args. Otherwise it works exactly like cgminer.

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883

1387769316 is not the right timestamp.

How do you determine the proper timestamp and why wouldn't the correct one be listed in the OP?

The timestamp is the time genesis block was mined. You don't need to determine it. It's there in the OP

gristlelump

member

Activity: 110

Merit: 10

Quote from: Snard on January 20, 2014, 05:47:35 PM

Quote from: jasinlee on January 20, 2014, 05:14:50 PM

Heh I appreciate your enthusiasm. I meant someone that is not the one that did the compile. :)

Jasin, I have been using this for the past 10 days or so.

http://rmdavidson.blogspot.com/2014/01/cgminer-372-scrypt-jane-patch-windows.html

Run it with the following args. Otherwise it works exactly like cgminer.

Code:

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388949883

1387769316 is not the right timestamp.

How do you determine the proper timestamp and why wouldn't the correct one be listed in the OP?

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: katoman on February 28, 2014, 01:34:31 PM

Quote from: kalgecin on February 28, 2014, 01:25:31 PM

Quote from: katoman on February 28, 2014, 10:47:00 AM

I have 20 coins in my wallet and it open 24/7 for 8 dayes and no POS

Am i doing anything wrong?

First time for me for somthing like this.

Windows version 5.0.0

Did you set a password, if not, then you're ok. It can take much more than 8 days. I had one after 3 weeks. 7 days is the minimum

Ok thx, it was just my understanding that it was after 7 dayes....
I did not set any password

It is not strictly after 7 days. There's a difficulty for stake too. But the luck for everyone is the same for PoS, no matter of your hardware. The longer the stake takes, the more the reward Wink

katoman

newbie

Activity: 12

Merit: 0

Quote from: kalgecin on February 28, 2014, 01:25:31 PM

Quote from: katoman on February 28, 2014, 10:47:00 AM

I have 20 coins in my wallet and it open 24/7 for 8 dayes and no POS

Am i doing anything wrong?

First time for me for somthing like this.

Windows version 5.0.0

Did you set a password, if not, then you're ok. It can take much more than 8 days. I had one after 3 weeks. 7 days is the minimum

Ok thx, it was just my understanding that it was after 7 dayes....
I did not set any password

kalgecin

hero member

Activity: 819

Merit: 1000

Quote from: katoman on February 28, 2014, 10:47:00 AM

I have 20 coins in my wallet and it open 24/7 for 8 dayes and no POS

Am i doing anything wrong?

First time for me for somthing like this.

Windows version 5.0.0

Did you set a password, if not, then you're ok. It can take much more than 8 days. I had one after 3 weeks. 7 days is the minimum

katoman

newbie

Activity: 12

Merit: 0

I have 20 coins in my wallet and it open 24/7 for 8 dayes and no POS

Am i doing anything wrong?

First time for me for somthing like this.

Windows version 5.0.0

rdnkjdi

legendary

Activity: 1256

Merit: 1009

Anyway we can get http://pool.cachecoin.net? I have coins to withdraw Cry

Topic: [ANN][CACH] CACHeCoin released based on scrypt-jane - page 79. (Read 224425 times)