Topic: [ANN][CACH] CACHeCoin released based on scrypt-jane - page 75. (Read 224425 times)

Redundant after a re-boot ?  I seriously doubt that ... If you shutdown/ restart your computer commands have to be re-entered... But I will try without I guess.

On a side note ... I am basically mining alone at http://pool.cachecoin.net,  someone come and join me ... 2 blocks found in the last 3 hours     Almost all the CACH to myself got very lucky !  But if one goes to 200% I will be mining for days !!! need more hash power !

I find the pool mining to be much more stable... When I mine P2P crashes are more frequent and I find the P2P nodes to be unreliable lately.  Miner is contstantly waiting for new work.

Cheers,

I use it to auto-restart my computers and cgwatcher reboots via the registry without issue.

I don't manually execute any commands, and mining commences without issue.

I believe once you issue those from a cmd or bat re-issuing is just redundant.

Hi,

I have used CG watched since Day 1.  But when miner starts crashing simple mining restarts are not enough. When they restart they hash at very low rates ( i.e. 14 kh/s) and sometimes it just says 0.00kh/s.... sometimes it crahses the computer. Its quite annoying. 

I know there is an option to restart the computer in CGwatcher.. but if you use this of do you run these command lines:


setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

 before tha mining starts automatically ?

I have noticed some oddities with tuning on the latest N-Factor as well.

Make sure you're submitting sufficient shares and getting proper WU still. Don't just assume a certain kh/s means everything is good  

If the miners are windows based make sure and try CGWatcher, lots of nice features to keep your miners hashing 24x7.

Thanks I will give that a try...  I have 4 different miners... this is the only one that does this.. although others have also been very unstable latetly, Crashing the Scrypt jane miner and requiring a re-boot very frequently !

I had been experimenting with my tuning during and found that I could clock down the memory to 800MHZ  from 1500 without a decrease in performance just an FYI for everyone out there !  Also powertune does not increase performance from 0 to +20 does not increase hashing performance.

Cheers,

Try Intensity 19, if that works you may need to "re-tune" your cards to keep them at I 20.

For me, occasionally if a GPU crashes it will start reporting incorrectly GH/s. I'd suggest turning down your GPU clocks, or increasing the GPU voltage or increasing GPU cooling or maybe even two or all of them things.

Is this seriously not happening to anyone else ?  It keeps happening to me more often.. Basically the GPU is useless once this happens and does not submit any shares.. I keep having to reboot every 45 minutes this is really annoying.  Any help would be appreciated.

cheers,

Regarding the PoS "not working", my CacheCoin wallet CPU usage is higher than my other wallets, I guess it's doing "something"?!?!?

I had around 16 CACH from ~10 stakes this week. Nothing wrong so far.


Poloniex is a good idea right now... better than most exchanges available out there.


~ 0.1 CACH per week.

Lets say I've got 100 CACHe in my wallet for few weeks. How much would I get with this PoS?

There is no cpu miner, coin yield would be very minimal too anyway. Might become more interesting around nfactor 14 though.

And the polo news are old already, the exchange is still alive and kicking, it wasn't even a real hack and way less lost than any other exchange hits, i wouldn't worry too much about it.

Where can I download a CPU scrypt-jane Miner to mine Cache for windows... preferably 64bit version if one exists?

7 days is the minimum! It also depends on the network PoS difficulty. It can take upto a month for a stake to occur. But currently, it takes a couple of weeks on average. For example, this particular stake took 16 days to stake: http://explorer.cachecoin.org/block/3fa5651cc74a19b2ec09e313c8c5261afc492f91577ac34348185c5f30a16f98

Poloniex not a good idea right now!

https://bitcointalksearch.org/topic/btc-stolen-from-poloniex-499580

+1, no idea what's going on with POS

Proof of Stake does not seem to be working for me.

I've mined several coins(The first was on 19th Feb), they've confirmed and also 7 days has passed since they confirmed. I've had my wallet open and unlocked for days. No coins staked, no interest.

What have I done wrong?

Can someoneplease explain why this keeps happening to me and how to fix it ....

When I mine after while some of my miners report they are going speeds in GH/s which is obviously impossible ... I don't know if this as affecting my mining bit I would like it to stop ... also this was the first time I got HW errors ....

See image to see what i mean.. the top 2 are reporting speeds in GH/s.

http://imgur.com/5eUjbX6

GPU 0:  Gigabyte r9 290 OC (windforce)
GPU 1: Sapphire Tri-x r9 290
GPU 2: Sapphire Tri-x r9 290
GPU 3:  Sapphire Tri-x r9 290


HEre is my PC info:

http://imgur.com/8B3AQ9n

This is my config file content:


{
"pools" : [
   {
      "name" : "qhor P2P",
      "url" : "http://q30.qhor.net:8336",
      "user" : "CZVP8n6MhNigMn7adbF8e8zqCC3fgQFEZR",
      "pass" : "xx",
      "pool-priority" : "0"
   },
   {
      "name" : "CaCHE p2cache.syware.de P2P",
      "url" : "http://p2cache.syware.de:8336",
      "user" : "CZVP8n6MhNigMn7adbF8e8zqCC3fgQFEZR",
      "pass" : "xx",
      "pool-priority" : "1"
   },
   {
      "name" : "p2p-miner.info(0)",
      "url" : "http://p2pool-miner.info:8336",
      "user" : "CZVP8n6MhNigMn7adbF8e8zqCC3fgQFEZR",
      "pass" : "xx",
      "pool-priority" : "2"
   }
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"failover-only" : true,
"fix-protocol" : true,
"kernel-path" : "/usr/local/bin",
"no-submit-stale" : true,
"queue" : "0",
"gpu-threads" : "1",
"gpu-engine" : "1040,1000,1000,1000",
"gpu-fan" : "70",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"intensity" : "20",
"temp-target" : "85",
"temp-overheat" : "92",
"temp-cutoff" : "94",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "30592",
"scrypt-jane" : true,
"sj-Nfmin" : "4",
"sj-Nfmax" : "30",
"sj-time" : "1388949883"
}


Thanks in advance for help!

Poloniex didnt get hacked. They got exploited and it's fixed by now. Its a decent exchange with very active and honest dev. It's fast and easy.

Craptsy ... no thanks

Thanks for the reply.  I thought Poloniex just got hacked and had accounts frozen.  According to posts the owner is using patrons fees to cover his fuckup....no thanks!  How bout Cryptsy?  Good, Bad?