, I know shit coin should remove from market and going to the hell with bagholder . 
Topic: [ANN][COVEN]|33k.7 Supply|HexNode|StealthMsging|Multisig|SmartX|IoT|I2P|TOR|COV2 (Read 7271 times)
July 19, 2015, 09:44:52 AM
thanks for good news richie , I know shit coin should remove from market and going to the hell with bagholder .
, I know shit coin should remove from market and going to the hell with bagholder . 
July 18, 2015, 12:53:46 PM
Where is CovenDev ? Has he abandoned us once again 
My guess: He doesn't really understand/know how to fix this mess and is awol again.
[...]
Suprise, surprise....
Guys, we're going to have to delist this coin. The wallet has been broken for at least 3 weeks and there isn't a dev to fix the issue. The market will be closing next friday and the wallet removed.
Thanks,
richie@bittrex
July 07, 2015, 01:06:05 PM
Where is CovenDev ? Has he abandoned us once again
My guess: He doesn't really understand/know how to fix this mess and is awol again.
[...]
Suprise, surprise....
July 06, 2015, 09:27:38 AM
Im Confused AGAIN
July 03, 2015, 03:18:09 PM
July 03, 2015, 02:33:22 PM
Ok ladds, how about this.
http://www.filedropper.com/covenfiles
just add them to your .Coven folder. And no, I didn't go to the trouble to put a virus in. But you can check, to make sure.
http://www.filedropper.com/covenfiles
just add them to your .Coven folder. And no, I didn't go to the trouble to put a virus in. But you can check, to make sure.
July 03, 2015, 02:03:58 PM
@ all: Anyone knows about the state of the chain prior to this COV2-mess? Was it working or stalled?
Stuck for a long time,
then bittrex (90% of total coins) enabled staking for 24 hours, and that (or the attention of other balance owners) made COV move,
a few blocks; then it got stuck again. Perhaps because bittrex disabled staking so soon?
samspaces posting above shows different blocks 3866, 3868, and 3923
and different versions 1.0.0 and 1.2.0 and 1.4.0
You might find more info in that thread.
@ COV2 wallet users: Using that wallet makes no sense
No doubt about that. I have no COV2 coins, either.But I wanted to try out the new code & chain of COV2 - to get an opinion about all this.
Idea: If that COV2 code is newer&better code, could it also be plugged on top of the old COV1 chain perhaps? Then no coin swap would be necessary, if that is so complicated / expensive.
July 03, 2015, 12:48:39 PM
Where is CovenDev ? Has he abandoned us once again
My guess: He doesn't really understand/know how to fix this mess and is awol again.
@ COV2 wallet users: Using that wallet makes no sense since this will only work if the dev does a manual swap after implementing PoW again (or get the COV1 chain moving again by other means). Unless he doesn't show up to fix this mess there's no point in using COV2 wallets. If possible revert to COV1 for now.
@ all: Anyone knows about the state of the chain prior to this COV2-mess? Was it working or stalled?
July 03, 2015, 10:56:55 AM
Thanks.
But no.
Those are COV nodes (old thread1, old thread2),
not COV2 nodes. We need seednodes for the new COV2.
But no.
Those are COV nodes (old thread1, old thread2),
not COV2 nodes. We need seednodes for the new COV2.
covend
coven server starting
covend getinfo
{
"version" : "v1.0.0.0-g",
"protocolversion" : 60600,
"walletversion" : 60000,
"blocks" : 0,
}
SEEDNODE / ADDNODE NEEDED !
Please tell me your (COV2 !) IP address, perhaps by PM;
I only need it temporarily, to get the blockchain. Thanks!
coven server starting
covend getinfo
{
"version" : "v1.0.0.0-g",
"protocolversion" : 60600,
"walletversion" : 60000,
"blocks" : 0,
}
SEEDNODE / ADDNODE NEEDED !
Please tell me your (COV2 !) IP address, perhaps by PM;
I only need it temporarily, to get the blockchain. Thanks!
July 03, 2015, 10:39:52 AM
To whom it may concern.
"addr" : "188.226.155.38:22454",
"services" : "00000001",
"lastsend" : 1435932190,
"lastrecv" : 1435932190,
"conntime" : 1435555162,
"version" : 60014,
"subver" : "/Coven:1.4.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "104.131.10.94:22454",
"services" : "00000001",
"lastsend" : 1435933007,
"lastrecv" : 1435933007,
"conntime" : 1435555169,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "107.170.49.98:22454",
"services" : "00000001",
"lastsend" : 1435933007,
"lastrecv" : 1435933007,
"conntime" : 1435555181,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "192.95.29.153:56486",
"services" : "00000001",
"lastsend" : 1435932983,
"lastrecv" : 1435932983,
"conntime" : 1435555190,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : true,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "101.165.90.37:58838",
"services" : "00000001",
"lastsend" : 1435932056,
"lastrecv" : 1435932057,
"conntime" : 1435881051,
"version" : 60014,
"subver" : "/Coven:1.4.0/",
"inbound" : true,
"startingheight" : 3868,
"banscore" : 0
},
{
"addr" : "137.135.57.119:2528",
"services" : "00000001",
"lastsend" : 1435932653,
"lastrecv" : 1435932654,
"conntime" : 1435932652,
"version" : 60014,
"subver" : "/Coven:1.2.0/",
"inbound" : true,
"startingheight" : 3923,
"banscore" : 0
"addr" : "188.226.155.38:22454",
"services" : "00000001",
"lastsend" : 1435932190,
"lastrecv" : 1435932190,
"conntime" : 1435555162,
"version" : 60014,
"subver" : "/Coven:1.4.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "104.131.10.94:22454",
"services" : "00000001",
"lastsend" : 1435933007,
"lastrecv" : 1435933007,
"conntime" : 1435555169,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "107.170.49.98:22454",
"services" : "00000001",
"lastsend" : 1435933007,
"lastrecv" : 1435933007,
"conntime" : 1435555181,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : false,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "192.95.29.153:56486",
"services" : "00000001",
"lastsend" : 1435932983,
"lastrecv" : 1435932983,
"conntime" : 1435555190,
"version" : 60014,
"subver" : "/Coven:1.0.0/",
"inbound" : true,
"startingheight" : 3866,
"banscore" : 0
},
{
"addr" : "101.165.90.37:58838",
"services" : "00000001",
"lastsend" : 1435932056,
"lastrecv" : 1435932057,
"conntime" : 1435881051,
"version" : 60014,
"subver" : "/Coven:1.4.0/",
"inbound" : true,
"startingheight" : 3868,
"banscore" : 0
},
{
"addr" : "137.135.57.119:2528",
"services" : "00000001",
"lastsend" : 1435932653,
"lastrecv" : 1435932654,
"conntime" : 1435932652,
"version" : 60014,
"subver" : "/Coven:1.2.0/",
"inbound" : true,
"startingheight" : 3923,
"banscore" : 0
July 03, 2015, 10:01:14 AM
covend
coven server starting
covend getinfo
{
"version" : "v1.0.0.0-g",
"protocolversion" : 60600,
"walletversion" : 60000,
"blocks" : 0,
}
SEEDNODE / ADDNODE NEEDED !
Please tell me your (COV2 !) IP address, perhaps by PM;
I only need it temporarily, to get the blockchain.
Thanks!
coven server starting
covend getinfo
{
"version" : "v1.0.0.0-g",
"protocolversion" : 60600,
"walletversion" : 60000,
"blocks" : 0,
}
SEEDNODE / ADDNODE NEEDED !
Please tell me your (COV2 !) IP address, perhaps by PM;
I only need it temporarily, to get the blockchain.
Thanks!
July 03, 2015, 09:47:31 AM
Code:
... makefile.unix:211: recipe for target 'obj/key.o' failed
make: *** [obj/key.o] Error 1
make: *** [obj/key.o] Error 1
git clone http://www.github.com/bitcoin/secp256k1
cd secp256k1
git checkout a1d5ae1
./autogen.sh
./configure
make
make install
Code:
covend
covend: error while loading shared libraries: libsecp256k1.so.0: cannot open shared object file: No such file or directory
covend: error while loading shared libraries: libsecp256k1.so.0: cannot open shared object file: No such file or directory
the temporary solution is
Code:
export LD_LIBRARY_PATH=/usr/local/lib
just wondering how to make that persistent on Debian
July 03, 2015, 09:38:48 AM
Code:
... makefile.unix:211: recipe for target 'obj/key.o' failed
make: *** [obj/key.o] Error 1
make: *** [obj/key.o] Error 1
git clone http://www.github.com/bitcoin/secp256k1
cd secp256k1
git checkout a1d5ae1
./autogen.sh
./configure
make
make install
Thanks a lot, that seems to have been it. Compilation continued.
Now a new problem appeared:
Quote
crypto/hmac_sha256.cpp:34:1: fatal error: opening dependency file obj/crypto/hmac_sha256.d: No such file or directory
}
^
compilation terminated.
makefile.unix:211: recipe for target 'obj/crypto/hmac_sha256.o' failed
make: *** [obj/crypto/hmac_sha256.o] Error 1
}
^
compilation terminated.
makefile.unix:211: recipe for target 'obj/crypto/hmac_sha256.o' failed
make: *** [obj/crypto/hmac_sha256.o] Error 1
which I could solve myself, by
Code:
mkdir obj/crypto
Then this came up:
Code:
g++: error: /root/coven2/src/leveldb/libleveldb.a: No such file or directory
g++: error: /root/coven2/src/leveldb/libmemenv.a: No such file or directory
g++: error: /root/coven2/src/leveldb/libmemenv.a: No such file or directory
which could be solved by
Code:
cd leveldb
chmod 755 build_detect_platform
make libleveldb.a libmemenv.a
cd ..
chmod 755 build_detect_platform
make libleveldb.a libmemenv.a
cd ..
Then it went through, finally.
thanks a lot!
July 03, 2015, 08:48:23 AM
July 02, 2015, 05:03:28 PM
Can't sync the new wallet.
Any nodes?
What is the port? 17814?
Any nodes?
What is the port? 17814?
Old or new wallet ?
July 02, 2015, 04:45:57 PM
Code:
make -f makefile.unix USE_UPNP=-
/bin/sh ../share/genbuild.sh obj/build.h
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/root/coven2/src -I/root/coven2/src/obj -DENABLE_WALLET -I/root/coven2/src/leveldb/include -I/root/coven2/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/key.d -o obj/key.o key.cpp
key.cpp: In member function 'bool CKey::SignCompact(const uint256&, std::vector&) const':
key.cpp:552:17: warning: unused variable 'ret' [-Wunused-variable]
if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
^
key.cpp: In member function 'bool CPubKey::VerifyCompact(const uint256&, const std::vector&) const':
key.cpp:632:10: warning: unused variable 'fComp' [-Wunused-variable]
bool fComp = IsCompressed();
^
key.cpp: In member function 'bool CPubKey::Decompress()':
key.cpp:669:104: error: cannot convert 'int*' to 'unsigned char*' for argument '3' to 'int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)'
int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
^
makefile.unix:211: recipe for target 'obj/key.o' failed
make: *** [obj/key.o] Error 1
git clone http://www.github.com/bitcoin/secp256k1
cd secp256k1
git checkout a1d5ae1
./autogen.sh
./configure
make
make install
July 02, 2015, 04:18:36 PM
It looks similiar to this problem here:
https://bitcointalk.org/index.php?topic=1090069.40
(in that coin, dev ran away, allegedly)
.. but I don't get it, what exactly to do now.
Use an older version of secp256k1 ?
Which one? How?
https://bitcointalk.org/index.php?topic=1090069.40
(in that coin, dev ran away, allegedly)
.. but I don't get it, what exactly to do now.
Use an older version of secp256k1 ?
Which one? How?
July 02, 2015, 03:48:22 PM
Code:
make -f makefile.unix USE_UPNP=-
/bin/sh ../share/genbuild.sh obj/build.h
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/root/coven2/src -I/root/coven2/src/obj -DENABLE_WALLET -I/root/coven2/src/leveldb/include -I/root/coven2/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/key.d -o obj/key.o key.cpp
key.cpp: In member function 'bool CKey::SignCompact(const uint256&, std::vector&) const':
key.cpp:552:17: warning: unused variable 'ret' [-Wunused-variable]
if (int ret = secp256k1_ecdsa_sign_compact(instance_of_csecp256k1.ctx, hash.begin(), &vchSig[1], begin(), secp256k1_nonce_function_rfc6979, NULL, &rec))
^
key.cpp: In member function 'bool CPubKey::VerifyCompact(const uint256&, const std::vector&) const':
key.cpp:632:10: warning: unused variable 'fComp' [-Wunused-variable]
bool fComp = IsCompressed();
^
key.cpp: In member function 'bool CPubKey::Decompress()':
key.cpp:669:104: error: cannot convert 'int*' to 'unsigned char*' for argument '3' to 'int secp256k1_ec_pubkey_decompress(const secp256k1_context_t*, const unsigned char*, unsigned char*, int*)'
int ret = secp256k1_ec_pubkey_decompress(instance_of_csecp256k1.ctx, (unsigned char*)begin(), &clen);
^
makefile.unix:211: recipe for target 'obj/key.o' failed
make: *** [obj/key.o] Error 1
July 02, 2015, 01:26:14 PM
Code:
makefile.unix:211: recipe for target 'obj/key.o' failed
make: *** [obj/key.o] Error 1
any hints?
thx
July 02, 2015, 05:20:36 AM
"addr" : "101.165.90.37:22454",
"addr" : "37.228.234.104:6835",
"addr" : "137.135.57.119:2544",
"addr" : "188.226.155.38:22454",
"addr" : "104.131.10.94:22454",
"addr" : "107.170.49.98:22454",
"addr" : "192.95.29.153:56486",
"addr" : "37.228.234.104:6835",
"addr" : "137.135.57.119:2544",
"addr" : "188.226.155.38:22454",
"addr" : "104.131.10.94:22454",
"addr" : "107.170.49.98:22454",
"addr" : "192.95.29.153:56486",
Jump to: