[ANN][CYP] CYPHER [QUBIT] WE ARE ALIVE | Cypher7A69 - page 130.

hugs1BTC

sr. member

Activity: 350

Merit: 250

Quote from: ocminer on April 01, 2015, 02:43:48 AM

I have had several PM's asking for miners and guides for Qubit mining, you guys should have a look at Geocoin (https://bitcointalksearch.org/topic/ann-geo-geocoin-gis-geotechnologies-923995) and my Geocoin Pool, its all been done before, no need to crosspost all the guides and miners here..

You can use the settings from Geocoin 1:1 for Cypher once launched.

This is what is was looking for, thanks.

MaxMinersNet

sr. member

Activity: 392

Merit: 250

Pool:

https://cypher.maxminers.net

Ready for pre-reg, please add to OP !

Cypher7A69

member

Activity: 89

Merit: 10

- 31337 -

Follow us on twitter:
https://twitter.com/CypherCoin2015

Official website:
http://www.cypher.pw

arloseb

hero member

Activity: 868

Merit: 1000

avatars on profiles?

abyrnes81

hero member

Activity: 714

Merit: 500

What is the minimum for this ICO? However nice concept, I think this coin will have an huge success.

mashcom

full member

Activity: 189

Merit: 100

Fantastic! I've bought two shares because I love the cypherpunk world and I hope to see this coin listed on bittrex or c-cex after the launch.

Framauro

sr. member

Activity: 431

Merit: 250

Quote from: ocminer on April 01, 2015, 02:43:48 AM

I have had several PM's asking for miners and guides for Qubit mining, you guys should have a look at Geocoin (https://bitcointalksearch.org/topic/ann-geo-geocoin-gis-geotechnologies-923995) and my Geocoin Pool, its all been done before, no need to crosspost all the guides and miners here..

You can use the settings from Geocoin 1:1 for Cypher once launched.

True, I'm mining geocoin from launch on ocminers pool and also you can test your qubit rig (and config) on suprnova's pool before you gonna mine Cypher.

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

Quote from: Edkemper on April 01, 2015, 09:26:57 AM

Damn guys, I've just made a mistake, it's not my fault, but when I sent some mBTC to buy shares, it tooks the fee from the mBTC it self and not from the whole balance, so now there's a TXi of 0.2999 and not a full 0.3. Let me know if it's ok.
I've fixed it with another Txi.
Sorry again.

I've looked the tx and i've also seen the 0.1 mBTC sent after to round up to 0.3 BTC your sum. Everything is ok, google doc updated.

Cypher7A69

member

Activity: 89

Merit: 10

- 31337 -

We're ready to launch our website later this week....

http://www.cypher.pw/

Quote from: Edkemper on April 01, 2015, 09:26:57 AM

Damn guys, I've just made a mistake, it's not my fault, but when I sent some mBTC to buy shares, it tooks the fee from the mBTC it self and not from the whole balance, so now there's a TXi of 0.2999 and not a full 0.3. Let me know if it's ok.
I've fixed it with another Txi.
Sorry again.

Everything is ok, thanks for the support.

Edkemper

sr. member

Activity: 462

Merit: 250

I love to trade

Quote from: Fritwakky on April 01, 2015, 09:41:00 AM

Quote from: Edkemper on April 01, 2015, 09:26:57 AM

Damn guys, I've just made a mistake, it's not my fault, but when I sent some mBTC to buy shares, it tooks the fee from the mBTC it self and not from the whole balance, so now there's a TXi of 0.2999 and not a full 0.3. Let me know if it's ok.
I've fixed it with another Txi.
Sorry again.

Ed... what are you doing my friend!!!

Im watching this.....

I had some balance on primedice, nevere used it to send BTC, so I sent from there and I got more than 0.3, so sending 0.3 I thought that it takes the fee from the rest of my balance, but it didn't. I bame it on god btw, not my fault.

Fritwakky

full member

Activity: 375

Merit: 101

Quote from: Edkemper on April 01, 2015, 09:26:57 AM

Damn guys, I've just made a mistake, it's not my fault, but when I sent some mBTC to buy shares, it tooks the fee from the mBTC it self and not from the whole balance, so now there's a TXi of 0.2999 and not a full 0.3. Let me know if it's ok.
I've fixed it with another Txi.
Sorry again.

Ed... what are you doing my friend!!!

Im watching this.....

Edkemper

sr. member

Activity: 462

Merit: 250

I love to trade

Damn guys, I've just made a mistake, it's not my fault, but when I sent some mBTC to buy shares, it tooks the fee from the mBTC it self and not from the whole balance, so now there's a TXi of 0.2999 and not a full 0.3. Let me know if it's ok.
I've fixed it with another Txi.
Sorry again.

pisciolatzu

full member

Activity: 165

Merit: 100

ars longa, vita brevis

Would you dev please consider using a different font? Cheesy

Cypher7A69

member

Activity: 89

Merit: 10

- 31337 -

Quote from: LTCMAXMYR on April 01, 2015, 02:41:44 AM

Quote from: Cypher7A69 on March 31, 2015, 01:28:17 PM

That's the block reward:

// miner's coin base reward
int64_t GetProofOfWorkReward(int64_t nFees)
{
if (pindexBest->nHeight < 10){
int64_t nSubsidy = 313370 * COIN; // ICO investors 3133700
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 60){ ZERO REWARDS
int64_t nSubsidy = 0 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 5060){
int64_t nSubsidy = 300 * COIN; // 1500000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 10060){
int64_t nSubsidy = 200 * COIN; // 1000000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 15060){
int64_t nSubsidy = 140 * COIN; // 700000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
}

Supply will be a little more than stated: 6.333.700

have you noticed there is a bug?
what will return when (pindexBest->nHeight >=15060) Huh

After Block 15060 CYP will turn into FULL POS.
We've already made a full mining test on -testnet and works great.

ocminer

legendary

Activity: 2688

Merit: 1240

I have had several PM's asking for miners and guides for Qubit mining, you guys should have a look at Geocoin (https://bitcointalksearch.org/topic/ann-geo-geocoin-gis-geotechnologies-923995) and my Geocoin Pool, its all been done before, no need to crosspost all the guides and miners here..

You can use the settings from Geocoin 1:1 for Cypher once launched.

LTCMAXMYR

hero member

Activity: 609

Merit: 500

DMD,XZC

Quote from: Cypher7A69 on March 31, 2015, 01:28:17 PM

That's the block reward:

// miner's coin base reward
int64_t GetProofOfWorkReward(int64_t nFees)
{
if (pindexBest->nHeight < 10){
int64_t nSubsidy = 313370 * COIN; // ICO investors 3133700
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 60){ ZERO REWARDS
int64_t nSubsidy = 0 * COIN;
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 5060){
int64_t nSubsidy = 300 * COIN; // 1500000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 10060){
int64_t nSubsidy = 200 * COIN; // 1000000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
} else if (pindexBest->nHeight < 15060){
int64_t nSubsidy = 140 * COIN; // 700000
if (fDebug && GetBoolArg("-printcreation"))
printf("GetProofOfWorkReward() : create=%s nSubsidy=%"PRId64"\n", FormatMoney(nSubsidy).c_str(), nSubsidy);
return nSubsidy + nFees;
}
}

Supply will be a little more than stated: 6.333.700

have you noticed there is a bug?
what will return when (pindexBest->nHeight >=15060) Huh

slovenia1

full member

Activity: 336

Merit: 100

You can upload logo, use bbcode, create faq, roadmap, events....

Cypher7A69

member

Activity: 89

Merit: 10

- 31337 -

Quote from: alexrossi on March 31, 2015, 02:06:14 PM

CYP Dev has sent me a gdoc spreadsheet to keep trace of every payment for the IEO. I will do my best to keep it updated with the incoming payments.

Link (that i suggest to add also in OP): https://docs.google.com/spreadsheets/d/18lnnkPIJ2A28hQ84oK3y8xERsiYJS6Q_SkdDSrBQDR0/edit?usp=sharing

OP just updated with DOC link and countdown :

DOC Investments

alexrossi

legendary

Activity: 3766

Merit: 1742

Join the world-leading crypto sportsbook NOW!

CYP Dev has sent me a gdoc spreadsheet to keep trace of every payment for the IEO. I will do my best to keep it updated with the incoming payments.

Link (that i suggest to add also in OP): https://docs.google.com/spreadsheets/d/18lnnkPIJ2A28hQ84oK3y8xERsiYJS6Q_SkdDSrBQDR0/edit?usp=sharing

Edkemper

sr. member

Activity: 462

Merit: 250

I love to trade

It'll be the first Qubit coin that I'm going to mine, for be sure I'll even buy a bit of shares, mine + shares is my road to profit it always works.
The OP I like the graphic and I like your logo too, remind me Thron because of its black and electric blue colors, I guess you were inspired by it drawing the logo.

Topic: [ANN][CYP] CYPHER [QUBIT] WE ARE ALIVE | Cypher7A69 - page 130. (Read 243278 times)