Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6502. (Read 9723858 times)
March 23, 2014, 11:00:07 AM
If it's dropping back to idle clocks, it might not be at full load for some reason. Are you cpu mining at the same time?
March 23, 2014, 10:54:35 AM
Saphire R9 290 the model with the one fan. I have 3 of them, same problem. I'm in touch with some guy on windows 7 that has 6 of them (different brand but same design), and has the same problem too.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
Is it a reference card? Can you find out if it is Hynix or Elpida memory? You might have to flash the stilt's bios (use the second bios bank). If it is to mine Darkcoin, you can go with the lower voltage mods. Sorry this conversation might be hijacking the thread. You can message on IRC if you want.
The point is: all the cards have the loss on the exact same second, wich shoul mean that it's not some sort of Bios issue, or am I wrong?
If all 290 cards have the loss on the exact same second, no matter on wich psu they are plugged in (I put a second psu for testing), is it not the software that causes the problem?
I have no idea how the program is coded, but is it possible that the miner has some sort of security that only impact the 290?
The fact that the Vdcc is not read and listed as 0 in the miner may be connected? That is the only parameters that is no listed correctly only on the 290.
March 23, 2014, 10:40:30 AM
Saphire R9 290 the model with the one fan. I have 3 of them, same problem. I'm in touch with some guy on windows 7 that has 6 of them (different brand but same design), and has the same problem too.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
Is it a reference card? Can you find out if it is Hynix or Elpida memory? You might have to flash the stilt's bios (use the second bios bank). If it is to mine Darkcoin, you can go with the lower voltage mods. Sorry this conversation might be hijacking the thread. You can message on IRC if you want.
Edit: This is what you can start with http://1drv.ms/MAPU6v
"-I 22 --thread-concurrency 32768 -w 256"
March 23, 2014, 10:32:52 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
If you have a Sapphire try TriXX (https://www.sapphireselectclub.com/ssc/TriXX/) to ajust the memory clock.
if i go any higher on the engine and clock settings it crashes
If I restart the miner only, I did not recover the 10%. If I shutdown the computer, I recover the 10% and I'am stable for 10 minutes...then it starts again.
March 23, 2014, 10:30:01 AM
Saphire R9 290 the model with the one fan. I have 3 of them, same problem. I'm in touch with some guy on windows 7 that has 6 of them (different brand but same design), and has the same problem too.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
I can flash any-bios you advise to.
It's 3 weeks now that I'm stuck with this issue.
March 23, 2014, 10:23:21 AM
Alright let's make this the project of the day 
(fixing boubou's problems)
What brand is it? I am with Kal here, a BIOS flash may be necessary here.
(fixing boubou's problems)What brand is it? I am with Kal here, a BIOS flash may be necessary here.
March 23, 2014, 10:21:09 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
If you have a Sapphire try TriXX (https://www.sapphireselectclub.com/ssc/TriXX/) to ajust the memory clock.
Yes it's for windows. Check if there is a similar software solution for linux or if it's necessary to flash your GPU.
@badman74 solution above seems better with the config.
March 23, 2014, 10:07:12 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
If you have a Sapphire try TriXX (https://www.sapphireselectclub.com/ssc/TriXX/) to ajust the memory clock.
"intensity" : "18,20",
"worksize" : "256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "30592",
"shaders" : "2048,2048",
"gpu-engine" : "300-1000,300-1050",
"gpu-fan" : "45-100,45-100",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "92,92",
"temp-target" : "88,88",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"auto-gpu" : false,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"temp-hysteresis" : "5",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
if i go any higher on the engine and clock settings it crashes
March 23, 2014, 09:49:33 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
If you have a Sapphire try TriXX (https://www.sapphireselectclub.com/ssc/TriXX/) to ajust the memory clock.
March 23, 2014, 09:48:58 AM
Update:
We are almost done with coding there are some delays but nothing that will hold us up for much longer. We are setting up some servers right as we speak and we should have a forum back up soon. Once coding is done we start on Graphics Design/HTML/CSS. We are committed to proving the best most pleasant most secure user experience possible.
Also we made the decision to add AnonCoin to our accepted payment options.
We are almost done with coding there are some delays but nothing that will hold us up for much longer. We are setting up some servers right as we speak and we should have a forum back up soon. Once coding is done we start on Graphics Design/HTML/CSS. We are committed to proving the best most pleasant most secure user experience possible.
Also we made the decision to add AnonCoin to our accepted payment options.
March 23, 2014, 09:45:38 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
If you have a Sapphire try TriXX (https://www.sapphireselectclub.com/ssc/TriXX/) to ajust the memory clock.
March 23, 2014, 09:34:10 AM
Ok, so yes, I already noticed my memory switch from 150 to 1250 from time to time.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
I was pretty sure it did that from the start, and not only after a while.
EDIT:
On my web UI, I refreh every seconds, and from the beginning (2.2Mh) the memory setting switch constantly from 1250 to 150.
After a while, I have a drop (2.0Mh), and the memory keep switching from 150 to 1250.
PS: I don't know if it's connected, but on the web UI my voltage is always 0 for my 290.
March 23, 2014, 09:10:41 AM
Coinmine has 54% of network hashpower! Spread the hashpower!
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
I have tried coinmine vs a couple of the other pools. 1 rig of 3 R9 290s 3 days each pool rotating over a couple of pools.
I get slightly more profit from a couple of the other pools than with coinmine. not sure why.
so you have a rig of R9 290.
I offer 30 Darkcoin to someone abble to fix the problem of loosing MH on R9 290 after 10 minutes.
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
So could you tell me if you run your miner on BAMT?
If yes, what exact image of BAMT did you get, what exact settings did you use, and what exact modifications did you do?
I assume you did not suffer the bug where you loos 0.2Mhs after 10 minutes?
that happens to me if i try to tweak the settings too far and the only way to fix it is a reboot
March 23, 2014, 09:04:22 AM
Coinmine has 54% of network hashpower! Spread the hashpower!
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
I have tried coinmine vs a couple of the other pools. 1 rig of 3 R9 290s 3 days each pool rotating over a couple of pools.
I get slightly more profit from a couple of the other pools than with coinmine. not sure why.
so you have a rig of R9 290.
I offer 30 Darkcoin to someone abble to fix the problem of loosing MH on R9 290 after 10 minutes.
I offer on the other topic 30 Darkcoin Bounty to solve that problem, a nobody has a clue, but I get in touch with other that had the same problem.
Here is the facts:
I have 3 different R9 290, other people has 6 290 of other brand, after 10 minutes, the cards looses 10% of Hash.
That probelm happend only on R9 290 cars.
I'm on Bamt 1.6 from Bajawa, He is on windows 7, same problem.
All 290 on the same rig experiment the loss in the exact same second
if you put another card in the rigg that is not a 290, all the 290 had a loss, but not the other card
The cards are cold.
The problem happenedonly with sph-darkcoin miner, if I mine Litecoin, I'm stable.
I split the cards with 2 PSU, does not change a thing, cards crashed at the same time, no matter what psu they are plugged.
I change motherboard, does not change a thing.
I run 4 different sgminer, each one with one card activated: even I did launch them with a delay of 3 minutes, 10 minutes later, all the instance with a 290 had a 10% lossat the same time
I launched sgminer without a .conf: only intensity in the parameters: happened with I:18 and I:21 (0% rejected, cards should worked with high intensity)
Once I got the loss only a cold reboot can recover the missing hash. If I mine restart only the miner, it restart but is capped to 90% of max hashrate.
I'm getting out of hints. If the problem is in the programm, I shoud stop wasting my time. If it is not, I will keep investigate, even if I think I already get pretty far.
PS: as usual, english is not my first languagae, so if I offensed any-one, it was not intended.
So could you tell me if you run your miner on BAMT?
If yes, what exact image of BAMT did you get, what exact settings did you use, and what exact modifications did you do?
I assume you did not suffer the bug where you loos 0.2Mhs after 10 minutes?
March 23, 2014, 09:01:59 AM
Coinmine has 54% of network hashpower! Spread the hashpower!
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
I have tried coinmine vs a couple of the other pools. 1 rig of 3 R9 290s 3 days each pool rotating over a couple of pools.
I get slightly more profit from a couple of the other pools than with coinmine. not sure why.
Coinmine should increase fee to reduce its hashing power. With more than 50% hashing power belongs to Coinmine, the price of the coin cannot be increased.
March 23, 2014, 08:39:16 AM
I have a problem
I have 280x Gigabyte, collegated to my mobo with risers 1x1x without power molex because there is only 1 gpu. Psu 750w 80+, after differentt time of mining the sgminer crushes witout any reas for me known... This is my config which I use. I use the same config for my RIG 3x 280x and works FINE!!
Using sgminer 4.1.0.
-g 2 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1650 --gpu-engine 1175 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-fan auto --failover-only --expiry 1 --scan-time 1 --queue 0 --no-submit-stale
Let me know if you have any any any idea why it crushes.... hmmmmm thnx! :*
I have 280x Gigabyte, collegated to my mobo with risers 1x1x without power molex because there is only 1 gpu. Psu 750w 80+, after differentt time of mining the sgminer crushes witout any reas for me known... This is my config which I use. I use the same config for my RIG 3x 280x and works FINE!!
Using sgminer 4.1.0.
-g 2 -w 64 -I 13 --lookup-gap 2 --thread-concurrency 8191 --gpu-memclock 1650 --gpu-engine 1175 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-fan auto --failover-only --expiry 1 --scan-time 1 --queue 0 --no-submit-stale
Let me know if you have any any any idea why it crushes.... hmmmmm thnx! :*
March 23, 2014, 08:01:44 AM
Yeah I know, but I've confirmed personally with Evan that it is indeed Darkcoin with a small c.
Ok !
March 23, 2014, 08:00:09 AM
Yeah I know, but I've confirmed personally with Evan that it is indeed Darkcoin with a small c.
March 23, 2014, 07:54:44 AM
Ok, so we had some great entries for the 2-5 sentence layman's explanation of DarkSend. In the end I went with TanteStefana's submission, since it's pitched at newbies, is to the point & concise:
TanteStefana, PM me your darkcoin wallet address and I'll send the bounty through!
Quote
DarkSend is an integrated technology inside DarkCoin that protects privacy by pooling like-sized payments and by hiding who paid whom. This blocks the pattern-seeking detection methods that are used to break privacy by making them too difficult and expensive to pursue. The developers of DarkCoin and DarkSend believe they offer users the best possible privacy protection available to any crypto-currency.
TanteStefana, PM me your darkcoin wallet address and I'll send the bounty through!
Very good! I think we should all be careful to remember the following though.
It's Darkcoin (with a small c) and DarkSend (with a capital S).
We need to be consistent with all our copy.
Look at the title of this thread.
March 23, 2014, 07:52:01 AM
Coinmine has 54% of network hashpower! Spread the hashpower!
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
http://www.drkpool.com/
http://lotterymining.com
http://dark.hashrapid.com
http://cpu-pool.net/drk/
http://drk.plasr.com/
http://Dark.SuchPool.pw
http://www.nimuecrypto.com/dark-pool
http://drk.yobapool.net/
http://benchdarkpool.myvnc.com/darkcoin/public/index.php
http://drk.justmine.us
http://darkcoin.miningpoolhub.com/
http://www.nimuecrypto.com/dark-pool
http://darckcoin.mine.nu/ (p2p)
http://darkcoin.boundarytesters.com/ (p2p)
I have tried coinmine vs a couple of the other pools. 1 rig of 3 R9 290s 3 days each pool rotating over a couple of pools.
I get slightly more profit from a couple of the other pools than with coinmine. not sure why.
I think this page has a clue.
http://darkcoin.mine.nu/poolhash.html
nethash : over 50%
block found : ~ 50%
Quote
3629 /home/user/blocks/blocks
last 1000 blocks
NEWBL 03-22 04:01:15 37571 412.231 Xd4Jv9fAf8NmgkJmmkoWXMi5JJPZdf4uUa
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
14 cpupool
34 mininghub
58 lotterymining
61 official
70 p2pool
244 suchpool
500 coinmine
last 500 blocks
NEWBL 03-23 01:03:56 38071 302.271 XoYNjJ8yEPkB3YUft5BtS1Je24eMgnAQXg
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
8 cpupool
15 mininghub
32 lotterymining
33 official
40 p2pool
116 suchpool
248 coinmine
last 400 blocks
NEWBL 03-23 05:34:24 38171 177.174 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
6 cpupool
13 mininghub
29 official
29 lotterymining
29 p2pool
91 suchpool
196 coinmine
last 300 blocks
NEWBL 03-23 09:30:11 38271 336.630 Xd4Jv9fAf8NmgkJmmkoWXMi5JJPZdf4uUa
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
5 cpupool
11 mininghub
19 lotterymining
23 official
26 p2pool
64 suchpool
147 coinmine
last 200 blocks
NEWBL 03-23 13:33:07 38371 343.073 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
3 cpupool
8 mininghub
9 lotterymining
15 official
20 p2pool
44 suchpool
99 coinmine
last 100 blocks
NEWBL 03-23 17:59:02 38471 230.992 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
2 mininghub
6 lotterymining
8 official
10 p2pool
25 suchpool
48 coinmine
last 1000 blocks
NEWBL 03-22 04:01:15 37571 412.231 Xd4Jv9fAf8NmgkJmmkoWXMi5JJPZdf4uUa
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
14 cpupool
34 mininghub
58 lotterymining
61 official
70 p2pool
244 suchpool
500 coinmine
last 500 blocks
NEWBL 03-23 01:03:56 38071 302.271 XoYNjJ8yEPkB3YUft5BtS1Je24eMgnAQXg
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
8 cpupool
15 mininghub
32 lotterymining
33 official
40 p2pool
116 suchpool
248 coinmine
last 400 blocks
NEWBL 03-23 05:34:24 38171 177.174 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
6 cpupool
13 mininghub
29 official
29 lotterymining
29 p2pool
91 suchpool
196 coinmine
last 300 blocks
NEWBL 03-23 09:30:11 38271 336.630 Xd4Jv9fAf8NmgkJmmkoWXMi5JJPZdf4uUa
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
5 cpupool
11 mininghub
19 lotterymining
23 official
26 p2pool
64 suchpool
147 coinmine
last 200 blocks
NEWBL 03-23 13:33:07 38371 343.073 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
3 cpupool
8 mininghub
9 lotterymining
15 official
20 p2pool
44 suchpool
99 coinmine
last 100 blocks
NEWBL 03-23 17:59:02 38471 230.992 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
NEWBL 03-23 22:08:41 38570 320.581 XccPicDbg7HhRfFwPU3Z2CFVpHSYAhuxtu
2 mininghub
6 lotterymining
8 official
10 p2pool
25 suchpool
48 coinmine
Jump to: