[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6905.

tabnk

full member

Activity: 140

Merit: 100

0.00056 BTC is too Low. Don't sell at this price.

daddeo

full member

Activity: 129

Merit: 100

Quote from: Probleminfected on February 15, 2014, 10:11:59 PM

Quote from: daddeo on February 15, 2014, 10:04:08 PM

Looks like I FINALLY got it. I used the AMD uninstall utility to clean out my 14.1 driver. Next I installed the 13.9 driver that someone referenced earlier as being stable. Then I wrote the following .bat:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

at least now it appears to be working and I can start playing around with parameters. Thanks everyone for your help. At least now I know I can follow directions: Grin

. I just had a rare incident. Either the sgminer file I downloaded was corrupted or the 14.1 driver I installed was. In either case, at least I now have a starting point.

try these settings when you are ready

-I 19 -g 1 -w 256 --thread-concurrency 5824

and then bump up -i until it either crashes or gives you less kh/s.

I haven't tried anything except bump up intensity to 18 within sgminer while its running thus far. I'm already getting 960 kh/s. How's that compare to what everyone else is getting?

daddeo

full member

Activity: 129

Merit: 100

Quote from: Probleminfected on February 15, 2014, 10:05:51 PM

Quote from: daddeo on February 15, 2014, 10:04:08 PM

Looks like I FINALLY got it. I used the AMD uninstall utility to clean out my 14.1 driver. Next I installed the 13.9 driver that someone referenced earlier as being stable. Then I wrote the following .bat:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

at least now it appears to be working and I can start playing around with parameters. Thanks everyone for your help. At least now I know I can follow directions: Grin

. I just had a rare incident. Either the sgminer file I downloaded was corrupted or the 14.1 driver I installed was. In either case, at least I now have a starting point.

great!

I hope everybody who is having problems does that same thing. Now hurry up before its too late!

I'm sure a veteran would have tried that first, but being a novice, I didn't think of it right away. Seems to this day, I still like to learn things the hard way. Lesson learned though. Grin

Probleminfected

member

Activity: 89

Merit: 100

Quote from: daddeo on February 15, 2014, 10:04:08 PM

Looks like I FINALLY got it. I used the AMD uninstall utility to clean out my 14.1 driver. Next I installed the 13.9 driver that someone referenced earlier as being stable. Then I wrote the following .bat:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

at least now it appears to be working and I can start playing around with parameters. Thanks everyone for your help. At least now I know I can follow directions: Grin

. I just had a rare incident. Either the sgminer file I downloaded was corrupted or the 14.1 driver I installed was. In either case, at least I now have a starting point.

try these settings when you are ready

-I 19 -g 1 -w 256 --thread-concurrency 5824

and then bump up -i until it either crashes or gives you less kh/s.

PyroClasTix

newbie

Activity: 56

Merit: 0

Price going up. Too bad I let some go for a bit cheaper earlier.

Probleminfected

member

Activity: 89

Merit: 100

Quote from: daddeo on February 15, 2014, 10:04:08 PM

Looks like I FINALLY got it. I used the AMD uninstall utility to clean out my 14.1 driver. Next I installed the 13.9 driver that someone referenced earlier as being stable. Then I wrote the following .bat:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

at least now it appears to be working and I can start playing around with parameters. Thanks everyone for your help. At least now I know I can follow directions: Grin

. I just had a rare incident. Either the sgminer file I downloaded was corrupted or the 14.1 driver I installed was. In either case, at least I now have a starting point.

great!

I hope everybody who is having problems does that same thing. Now hurry up before its too late!

daddeo

full member

Activity: 129

Merit: 100

Looks like I FINALLY got it. I used the AMD uninstall utility to clean out my 14.1 driver. Next I installed the 13.9 driver that someone referenced earlier as being stable. Then I wrote the following .bat:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

at least now it appears to be working and I can start playing around with parameters. Thanks everyone for your help. At least now I know I can follow directions: Grin

. I just had a rare incident. Either the sgminer file I downloaded was corrupted or the 14.1 driver I installed was. In either case, at least I now have a starting point.

SeriousCoins14

full member

Activity: 154

Merit: 100

Coinoholic

Quote from: Probleminfected on February 15, 2014, 09:39:11 PM

Quote from: SeriousCoins14 on February 15, 2014, 09:34:33 PM

Quote from: Probleminfected on February 15, 2014, 09:32:43 PM

only use up to 13.12. opencl is broken on anything above it... for now.

14.1 was the only thing to get it running for me on two separate computers with two separate 5xxx series cards. It refused to run on 13.12 even with the same bat I posted earlier. (in my two cases)

Yes they will work, but hash rates are super low with them... at least when mining scrypt.

This is true, the drivers aren't stable. I'll have to roll back to mine other coins.

--------------------------------------------------------------------------------------------

Is there any voting going on for darkcoin on cryptsy? I can't wait to buy buy buy in the upfront sell panic that always happens there

Probleminfected

member

Activity: 89

Merit: 100

Quote from: SeriousCoins14 on February 15, 2014, 09:34:33 PM

Quote from: Probleminfected on February 15, 2014, 09:32:43 PM

only use up to 13.12. opencl is broken on anything above it... for now.

14.1 was the only thing to get it running for me on two separate computers with two separate 5xxx series cards. It refused to run on 13.12 even with the same bat I posted earlier. (in my two cases)

Yes they will work, but hash rates are super low with them... at least when mining scrypt.

slyA

full member

Activity: 126

Merit: 100

The rise begins!!!

SeriousCoins14

full member

Activity: 154

Merit: 100

Coinoholic

Quote from: Probleminfected on February 15, 2014, 09:32:43 PM

only use up to 13.12. opencl is broken on anything above it... for now.

14.1 was the only thing to get it running for me on two separate computers with two separate 5xxx series cards. It refused to run on 13.12 even with the same bat I posted earlier. (in my two cases)

Probleminfected

member

Activity: 89

Merit: 100

only use up to 13.12. opencl is broken on anything above it... for now.

SeriousCoins14

full member

Activity: 154

Merit: 100

Coinoholic

Quote from: daddeo on February 15, 2014, 09:19:04 PM

FFS! Same error. I guess I'll try deleting everything and starting over. No one else seems to have had this much trouble with it. Maybe my sgminer download was corrupted or something.

Did you try the new beta drivers from AMD I linked before? That's what got it running for me. I'm still sure its related to thread concurrency because with or without adl if I go over 3200 on the 5770s it stops dead in the water. try messing with the concurrency value and maybe do -g 1. You'll find the magic spot, it seems like it is just a random magic number for 5xxx series cards.

Probleminfected

member

Activity: 89

Merit: 100

Quote from: daddeo on February 15, 2014, 09:19:04 PM

FFS! Same error. I guess I'll try deleting everything and starting over. No one else seems to have had this much trouble with it. Maybe my sgminer download was corrupted or something.

do a complete uninstall of drivers and then ->

use 13.12 drivers and the newest sdk.

look at https://litecoin.info/Mining_hardware_comparison for more info on card settings.

AlexGR

legendary

Activity: 1708

Merit: 1049

Quote from: daddeo on February 15, 2014, 09:19:04 PM

FFS! Same error. I guess I'll try deleting everything and starting over. No one else seems to have had this much trouble with it. Maybe my sgminer download was corrupted or something.

Also do a reboot, maybe catalyst is f***ed up as well.

daddeo

full member

Activity: 129

Merit: 100

FFS! Same error. I guess I'll try deleting everything and starting over. No one else seems to have had this much trouble with it. Maybe my sgminer download was corrupted or something.

daddeo

full member

Activity: 129

Merit: 100

Quote from: Probleminfected on February 15, 2014, 09:10:08 PM

Quote from: daddeo on February 15, 2014, 08:59:56 PM

Same scenario.

[19:56:03] Started sgminer 4.0.0
[19:56:03] Started sgminer 4.0.0
[19:57:54] Error -11: Building Program (clBuildProgram)
[19:57:54] Error compiling program for search.

Frontend phase failed compilation.
Error: Creating kernel search failed!

[19:57:54] Failed to init GPU thread 0, disabling device 0
[19:57:54] Restarting the GPU from the menu will not fix this.
[19:57:54] Try restarting sgminer.
Press enter to continue:

Here's my .bat:

sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl -I 18 --thread-concurrency 3200 -w 256 -g 2 --lookup-gap 2

try just this

sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

and then build onto it one at a time until it fails again and you'll find your problem.

Okay I'll try. I also get a window saying "sgminer has stopped working" when I hit enter at the end of the error message. Just thought I'd add that in case it meant something.

Probleminfected

member

Activity: 89

Merit: 100

Quote from: daddeo on February 15, 2014, 08:59:56 PM

Same scenario.

[19:56:03] Started sgminer 4.0.0
[19:56:03] Started sgminer 4.0.0
[19:57:54] Error -11: Building Program (clBuildProgram)
[19:57:54] Error compiling program for search.

Frontend phase failed compilation.
Error: Creating kernel search failed!

[19:57:54] Failed to init GPU thread 0, disabling device 0
[19:57:54] Restarting the GPU from the menu will not fix this.
[19:57:54] Try restarting sgminer.
Press enter to continue:

Here's my .bat:

sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl -I 18 --thread-concurrency 3200 -w 256 -g 2 --lookup-gap 2

try just this

sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl

and then build onto it one at a time until it fails again and you'll find your problem.

tabnk

full member

Activity: 140

Merit: 100

HIGHEST. C-CEX should THANK DARK COIN !!! for the profit and fee. Shocked

Quote from: Acidyo on February 15, 2014, 08:10:25 PM

Quote from: SeriousCoins14 on February 15, 2014, 08:00:54 PM

Quote from: blaaaaacksuit on February 15, 2014, 07:59:04 PM

Hmm.. they pulled dark from coinmarketcap, what are they up to?

trying to kill the price and buy in because they know where dark is headed Wink

https://c-cex.com/index.html?id=stat

this is where they are headed.

daddeo

full member

Activity: 129

Merit: 100

Same scenario.

[19:56:03] Started sgminer 4.0.0
[19:56:03] Started sgminer 4.0.0
[19:57:54] Error -11: Building Program (clBuildProgram)
[19:57:54] Error compiling program for search.

Frontend phase failed compilation.
Error: Creating kernel search failed!

[19:57:54] Failed to init GPU thread 0, disabling device 0
[19:57:54] Restarting the GPU from the menu will not fix this.
[19:57:54] Try restarting sgminer.
Press enter to continue:

Here's my .bat:

sgminer.exe --kernel darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u Daddeo.1 -p x --no-adl -I 18 --thread-concurrency 3200 -w 256 -g 2 --lookup-gap 2

Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6905. (Read 9723475 times)