So mining and MN are still alive. But I don't see any activity of th edev team either here or in telegram chat. Are they still working on it? Or it is abandoned?
Since the mining is still alive and there are people, I think the project has not been abandoned, but the project is not so active in the community. 
Topic: [ANN][ENT] Eternity - X11 - No Premine - page 7. (Read 83921 times)
So mining and MN are still alive. But I don't see any activity of th edev team either here or in telegram chat. Are they still working on it? Or it is abandoned?
Still cheap to buy and setup a masternode, no premine will be a good coin, ENT on the top.
Best regards
Okane Satoshi
Steward.Friendz
Signal.Network
Best regards
Okane Satoshi
Steward.Friendz
Signal.Network
when moon sir ?
Tomorrow, but don't tell anyone.
when moon sir ?
Hello, I mistakenly bought 400 ENT tokens off etherdelta exchange at the rate of .002 Eth. I know, big mistake, I paid about .7 eth too much. Will never be so hasty again.
At any rate, I still want to put them on an exchange but I can't seem to do this, because it keeps saying invalid address, even though I know that ENT deposit address is correct on Yobit and livecoin exchanges.
I can't seem to find the right contract address to add this as a token. Is this even an ethereum based token? What am I missing? How do I add the token to myetherwallet? Is it even a token anymore? Please help! This is driving me crazy.
Right now they are in my etherdelta exchange personal wallet.
At any rate, I still want to put them on an exchange but I can't seem to do this, because it keeps saying invalid address, even though I know that ENT deposit address is correct on Yobit and livecoin exchanges.
I can't seem to find the right contract address to add this as a token. Is this even an ethereum based token? What am I missing? How do I add the token to myetherwallet? Is it even a token anymore? Please help! This is driving me crazy.
Right now they are in my etherdelta exchange personal wallet.
Eternity [ENT] is coin not token..
Maybe you buy some different eg: ENTCash.
Hello, I mistakenly bought 400 ENT tokens off etherdelta exchange at the rate of .002 Eth. I know, big mistake, I paid about .7 eth too much. Will never be so hasty again.
At any rate, I still want to put them on an exchange but I can't seem to do this, because it keeps saying invalid address, even though I know that ENT deposit address is correct on Yobit and livecoin exchanges.
I can't seem to find the right contract address to add this as a token. Is this even an ethereum based token? What am I missing? How do I add the token to myetherwallet? Is it even a token anymore? Please help! This is driving me crazy.
Right now they are in my etherdelta exchange personal wallet.
At any rate, I still want to put them on an exchange but I can't seem to do this, because it keeps saying invalid address, even though I know that ENT deposit address is correct on Yobit and livecoin exchanges.
I can't seem to find the right contract address to add this as a token. Is this even an ethereum based token? What am I missing? How do I add the token to myetherwallet? Is it even a token anymore? Please help! This is driving me crazy.
Right now they are in my etherdelta exchange personal wallet.
i use ubuntu and work fine for me (pay).. but first pay out was few day later from start(masternode).
Hallo, my MN is under Windows, is it paying.
Guide for V0.12.0 nodes updating to v0.12.1.6 in servers like Vultr or VPS.ag
First of all, if you have not already stop your old node, it's time to stop it.
Let's update our server after that
It's time to download the new distro
Now we unpack it
And start the new node:
Funny thing, in my nodes at least I didn't recieve the rpcuser and rpcpassword usual error message of the first turn on of the node, so I have to push ctrl+c and enter to exit from node execution
Now we have to configure the new eternity.conf file
We include the usual info:
Let's start our node:
See if everything is working
And made some cleaning from old instalation and tar archives if neccesary:
We can also erase the old eternity blockchain folder .eternity, but I forgot about it
FInally we wait to have downloaded all the chain (it ususally is a very fast download), go to the console, restart the node with eternitynode start-alias and go to our node to check if the eternitynode is correctly started with:
And that's all. If you detect any mistake, please, post it to update the guide.
Salute
Ahhh, tip jar if you have some eternity to give away
EVgCha8qvpXeT52WaBQyoeXP9QdgvcRsnf
First of all, if you have not already stop your old node, it's time to stop it.
Quote
cd eternity-0.12.0/bin && ./eternity-cli stop
Let's update our server after that
Quote
cd
apt-get update
apt-get upgrade
apt-get update
apt-get upgrade
It's time to download the new distro
Quote
Now we unpack it
Quote
tar -xzvf eternitycore-0.12.1-linux64.tar.gz
And start the new node:
Quote
cd eternitycore-0.12.1/bin && ./eternityd
Funny thing, in my nodes at least I didn't recieve the rpcuser and rpcpassword usual error message of the first turn on of the node, so I have to push ctrl+c and enter to exit from node execution
Now we have to configure the new eternity.conf file
Quote
cd
cd .eternitycore && nano eternity.conf
cd .eternitycore && nano eternity.conf
We include the usual info:
Quote
rpcuser=lonbfdsbsfbfbfdgbzfdbame
rpcpassword=longzbfbzbfdbzdbword
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=
--> We can copy the priv key from our eternitynode.conf file in the controller wallet or go to the folder .eternity and copy from the old eternity.conf file. Also we can use Winscp or a similar program to directly copy the old file in the new .eternitycore folder.rpcpassword=longzbfbzbfdbzdbword
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=
Let's start our node:
Quote
cd
cd eternitycore-0.12.1/bin && ./eternityd
cd eternitycore-0.12.1/bin && ./eternityd
See if everything is working
Quote
./eternity-cli getinfo
And made some cleaning from old instalation and tar archives if neccesary:
Quote
cd
rm -Rf eternity-0.12.0 && rm -Rf eternity-0.12.0-linux64.tar.gz && rm -Rf eternitycore-0.12.1-linux64.tar.gz && cd eternitycore-0.12.1/bin
rm -Rf eternity-0.12.0 && rm -Rf eternity-0.12.0-linux64.tar.gz && rm -Rf eternitycore-0.12.1-linux64.tar.gz && cd eternitycore-0.12.1/bin
We can also erase the old eternity blockchain folder .eternity, but I forgot about it
FInally we wait to have downloaded all the chain (it ususally is a very fast download), go to the console, restart the node with eternitynode start-alias and go to our node to check if the eternitynode is correctly started with:
Quote
./eternity-cli eternitynode status
And that's all. If you detect any mistake, please, post it to update the guide.
Salute
Ahhh, tip jar if you have some eternity to give away
EVgCha8qvpXeT52WaBQyoeXP9QdgvcRsnf
Hope this helps.
Salute
Hey there.
Great instructions.
So before I rent a VPS...
Still working? This looks like a modified dash clone the like of chc/terra. That particular code is not currently paying out MN rewards for the other coins I mentioned. Is this still an issue for ENT. If so I'll wait to resolved before starting MN.
Can you advise if
1. the instructions are still valid
2. masternodes are currently paying out rewards
3. anything else that you think would help someone new to this coin
Thanks a ton in advance!
-tokenz
Hey fellow ENT hodler's.
We're doing a little ENT giveaway later today. Should be doing some ETH giveaways too.
Just wanted to invite you: https://discord.gg/jkkWpBu
And remember.... HODL that ENT!!
We're doing a little ENT giveaway later today. Should be doing some ETH giveaways too.
Just wanted to invite you: https://discord.gg/jkkWpBu
And remember.... HODL that ENT!!
a very interesting Announcements 
Yeah i guess it's a joke
1. create account
2. make a ann
3. leave and let people talk
So this was it, there is no Eternity coin
yup
Added Eternity coin
on poolmin.com
Fee only 0.5% - Random 0% fee
Payment every 1h
With the profitability tool just enter your hash rate and find how much you get
on poolmin.com
Fee only 0.5% - Random 0% fee
Payment every 1h
Code:
-a x11 -o stratum+tcp://mine.poolmin.com:3533 -u-p c=ENT
With the profitability tool just enter your hash rate and find how much you get
Eternity is now being mined on D3Pool.eu - high profitability multipool
Link: D3pool.eu
ANN: https://bitcointalksearch.org/topic/annpool-d3pooleu-40-x11-coins-profit-switching-auto-exchange-2904614
Fee: only 0.5%
We have an active team & fast responding support - join us on Facebook - Twitter
Link: D3pool.eu
ANN: https://bitcointalksearch.org/topic/annpool-d3pooleu-40-x11-coins-profit-switching-auto-exchange-2904614
Fee: only 0.5%
We have an active team & fast responding support - join us on Facebook - Twitter
Is the governance (10% of the block reward) activated yet?
If not, is it on the roadmap? Thank you.
If not, is it on the roadmap? Thank you.
Hallo,
I started my masternode ... but it is still in PRE-ENABLED state ... is it normal for how long time?
Ah no wait, now it is ENABLED ... how much does it take to get paid? every day or when ?
thanks
I started my masternode ... but it is still in PRE-ENABLED state ... is it normal for how long time?
Ah no wait, now it is ENABLED ... how much does it take to get paid? every day or when ?
thanks
i will wait for more update how to get this coin
Thank you fgopper,
That is awesome... appreciate it mate.
Local Computer Windows:
1. Install Win wallet https://github.com/eternity-group/eternity/releases/tag/v0.12.1.6 on your LC.
2. wait for full synchronization wallet.
3. Receive a new address
4. Send coins from exchange on received address (3.).
5. console debug wallet on your LC>>> getaccountaddress EternityNode>>> Enter>>> copy Eternitynodeaddress on Notepad
6. console debug wallet on your LC>>> sendtoaddress "Eternitynodeaddress (5.)" 1000>>> Enter.
7. wait for the recommended confirmations (6.)
8. console debug wallet on your LC>>>> eternitynode outputs>>> Enter>>> copy eternitynode outputs with the index (0-1) on Notepad.
9. Close LC wallet.
10.File eternity.conf is empty.
Go to WinVPS:
1. Install Win wallet https://github.com/eternity-group/eternity/releases/tag/v0.12.1.6 on your WinVPS.
2. wait for full synchronization wallet.
3. console debug wallet on your WinVPS>>> eternitynode genkey>>> Enter>>> copy privatekey your Eternitynode on Notepad.
4. Close Wallet.
5. Open file eternity.conf on your WinVPS copy the following
eternitynode=1
eternitynodeprivkey= privatekey your Eternitynode (3.)
discover=1
externalip=xxx.xxx.xxx.xxx( your external IP address VPS):4855
save and exit.
6. Start Wallet on WinVPS. Wait for full synchronization wallet.
7. Follow on your LC.
8. In folder your LC wallet open file eternitynode.conf copy the following
Example: mn1:4855
save and exit.
9. Start LC wallet.
10. In the LC wallet setup menu, select the Display tab with Eternitynode.
11. Following Eternitynode menu>>> My Eternitynode>>> Start all>>> YES>>> OK.
That is awesome... appreciate it mate.
I cannot find info on how to setup masternode?
hiLocal Computer Windows:
1. Install Win wallet https://github.com/eternity-group/eternity/releases/tag/v0.12.1.6 on your LC.
2. wait for full synchronization wallet.
3. Receive a new address
4. Send coins from exchange on received address (3.).
5. console debug wallet on your LC>>> getaccountaddress EternityNode>>> Enter>>> copy Eternitynodeaddress on Notepad
6. console debug wallet on your LC>>> sendtoaddress "Eternitynodeaddress (5.)" 1000>>> Enter.
7. wait for the recommended confirmations (6.)
8. console debug wallet on your LC>>>> eternitynode outputs>>> Enter>>> copy eternitynode outputs with the index (0-1) on Notepad.
9. Close LC wallet.
10.File eternity.conf is empty.
Go to WinVPS:
1. Install Win wallet https://github.com/eternity-group/eternity/releases/tag/v0.12.1.6 on your WinVPS.
2. wait for full synchronization wallet.
3. console debug wallet on your WinVPS>>> eternitynode genkey>>> Enter>>> copy privatekey your Eternitynode on Notepad.
4. Close Wallet.
5. Open file eternity.conf on your WinVPS copy the following
eternitynode=1
eternitynodeprivkey= privatekey your Eternitynode (3.)
discover=1
externalip=xxx.xxx.xxx.xxx( your external IP address VPS):4855
save and exit.
6. Start Wallet on WinVPS. Wait for full synchronization wallet.
7. Follow on your LC.
8. In folder your LC wallet open file eternitynode.conf copy the following
Example: mn1
save and exit.
9. Start LC wallet.
10. In the LC wallet setup menu, select the Display tab with Eternitynode.
11. Following Eternitynode menu>>> My Eternitynode>>> Start all>>> YES>>> OK.
Thank you NormDSR..
Appreciate your help.
Hope this helps.
Salute
For ppl who can't find it in the thread
this is the updated MN install procedure.
Worked for me on Virpus.com VPS
Thanks to OP
Appreciate your help.
Guide for V0.12.0 nodes updating to v0.12.1.6 in servers like Vultr or VPS.ag
First of all, if you have not already stop your old node, it's time to stop it.
Let's update our server after that
It's time to download the new distro
Now we unpack it
And start the new node:
Funny thing, in my nodes at least I didn't recieve the rpcuser and rpcpassword usual error message of the first turn on of the node, so I have to push ctrl+c and enter to exit from node execution
Now we have to configure the new eternity.conf file
We include the usual info:
Let's start our node:
See if everything is working
And made some cleaning from old instalation and tar archives if neccesary:
We can also erase the old eternity blockchain folder .eternity, but I forgot about it
FInally we wait to have downloaded all the chain (it ususally is a very fast download), go to the console, restart the node with eternitynode start-alias and go to our node to check if the eternitynode is correctly started with:
And that's all. If you detect any mistake, please, post it to update the guide.
Salute
Ahhh, tip jar if you have some eternity to give away
EVgCha8qvpXeT52WaBQyoeXP9QdgvcRsnf
First of all, if you have not already stop your old node, it's time to stop it.
Quote
cd eternity-0.12.0/bin && ./eternity-cli stop
Let's update our server after that
Quote
cd
apt-get update
apt-get upgrade
apt-get update
apt-get upgrade
It's time to download the new distro
Quote
Now we unpack it
Quote
tar -xzvf eternitycore-0.12.1-linux64.tar.gz
And start the new node:
Quote
cd eternitycore-0.12.1/bin && ./eternityd
Funny thing, in my nodes at least I didn't recieve the rpcuser and rpcpassword usual error message of the first turn on of the node, so I have to push ctrl+c and enter to exit from node execution
Now we have to configure the new eternity.conf file
Quote
cd
cd .eternitycore && nano eternity.conf
cd .eternitycore && nano eternity.conf
We include the usual info:
Quote
rpcuser=lonbfdsbsfbfbfdgbzfdbame
rpcpassword=longzbfbzbfdbzdbword
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=
--> We can copy the priv key from our eternitynode.conf file in the controller wallet or go to the folder .eternity and copy from the old eternity.conf file. Also we can use Winscp or a similar program to directly copy the old file in the new .eternitycore folder.rpcpassword=longzbfbzbfdbzdbword
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=
Let's start our node:
Quote
cd
cd eternitycore-0.12.1/bin && ./eternityd
cd eternitycore-0.12.1/bin && ./eternityd
See if everything is working
Quote
./eternity-cli getinfo
And made some cleaning from old instalation and tar archives if neccesary:
Quote
cd
rm -Rf eternity-0.12.0 && rm -Rf eternity-0.12.0-linux64.tar.gz && rm -Rf eternitycore-0.12.1-linux64.tar.gz && cd eternitycore-0.12.1/bin
rm -Rf eternity-0.12.0 && rm -Rf eternity-0.12.0-linux64.tar.gz && rm -Rf eternitycore-0.12.1-linux64.tar.gz && cd eternitycore-0.12.1/bin
We can also erase the old eternity blockchain folder .eternity, but I forgot about it
FInally we wait to have downloaded all the chain (it ususally is a very fast download), go to the console, restart the node with eternitynode start-alias and go to our node to check if the eternitynode is correctly started with:
Quote
./eternity-cli eternitynode status
And that's all. If you detect any mistake, please, post it to update the guide.
Salute
Ahhh, tip jar if you have some eternity to give away
EVgCha8qvpXeT52WaBQyoeXP9QdgvcRsnf
Hope this helps.
Salute
this is the updated MN install procedure.
Worked for me on Virpus.com VPS
Thanks to OP
Thank you Goddylein...
Will check it out.
http://michael.morris-family.us/2017/08/26/eternity-ent-masternode-setup/
https://www.youtube.com/watch?v=Lybtz7iucVs
Offical: https://www.youtube.com/watch?v=yaeZ-qKgK7I
Will check it out.
I agree,
Would anyone care to share how to set up a masternode?
Would appreciate your help.
Thanks.
Would anyone care to share how to set up a masternode?
Would appreciate your help.
Thanks.
Where is masternode setup information?
http://michael.morris-family.us/2017/08/26/eternity-ent-masternode-setup/
https://www.youtube.com/watch?v=Lybtz7iucVs
Offical: https://www.youtube.com/watch?v=yaeZ-qKgK7I
Jump to: