Hi Dev,
Just few things to clarify. the wallet Aquachain v1.5.1 (HF5) will it be used after the hardfork also Is it possible to get a miner apart from the miner in wallet.
Topic: [ANN][EVM][Argon2id]💧Aquachain (AQUA)💧Programmable Money - page 13. (Read 23320 times)
I like the effort put into this project. The developer is always on hand to assist and the ethic of the project is a solid one.
Sometimes, a basic clone of a previously existing project, can lead to a very fruitful end result. This developer has the right intentions.
i applaud all the work done by aerth.
Sometimes, a basic clone of a previously existing project, can lead to a very fruitful end result. This developer has the right intentions.
i applaud all the work done by aerth.
trying to run the console and been getting this message over and over for like 10 minutes. am i doing something wrong?
ERROR[03-16|09:27:47]
########## BAD BLOCK #########
Chain config: {ChainID: 1, Engine: aquahash, HF-Ready: 0:3000 1:3600 2:7200 3:14400}
Number: 9134
Hash: 0x22edd012cd35fcd1c82d63dc7e7d707ebfc4bb4f71efc99d64df12d00aae098b
Error: uncle's parent is not ancestor
##############################
ERROR[03-16|09:27:47]
########## BAD BLOCK #########
Chain config: {ChainID: 1, Engine: aquahash, HF-Ready: 0:3000 1:3600 2:7200 3:14400}
Number: 9134
Hash: 0x22edd012cd35fcd1c82d63dc7e7d707ebfc4bb4f71efc99d64df12d00aae098b
Error: uncle's parent is not ancestor
##############################
You should delete that and upgrade. Here is the link: https://github.com/aquanetwork/aquachain/releases/tag/v1.5.0-rc2
https://github.com/aquanetwork/aquachain/releases
Your HF-Ready map does not show past HF3 (0:3000 1:3600 2:7200 3:14400)
Test network blocks/coins will be deleted after fork?
testnet coins stay on testnet.
The testnet pool will switch to mainnet at block 22800 (or maybe 1 or 2 before) to get the party started. There will be a brief downtime during the switch.
Until then, mine the last ethash blocks!
current block is 22618, so still 182 blocks til switch... difficult to gauge ETA due to the 'stuck' diff - which is slowly dropping. should be at some point over the weekend.
You can try solo mining at the switch if you have enough CPU power, however, here's the pool...
http://pool.aquachain-foundation.org:8082/
hope this helps.
cheers
you should set your cpu to mine on the testnet now and when the algo changes, it will auto-switch to the mainnet. in case you are sleeping or miss it
Test network blocks/coins will be deleted after fork?
testnet coins stay on testnet.
The testnet pool will switch to mainnet at block 22800 (or maybe 1 or 2 before) to get the party started. There will be a brief downtime during the switch.
Until then, mine the last ethash blocks!
current block is 22618, so still 182 blocks til switch... difficult to gauge ETA due to the 'stuck' diff - which is slowly dropping. should be at some point over the weekend.
You can try solo mining at the switch if you have enough CPU power, however, here's the pool...
http://pool.aquachain-foundation.org:8082/
hope this helps.
cheers
Test network blocks/coins will be deleted after fork?
testnet coins stay on testnet.
The testnet pool will switch to mainnet at block 22800 (or maybe 1 or 2 before) to get the party started. There will be a brief downtime during the switch.
Until then, mine the last ethash blocks!
current block is 22618, so still 182 blocks til switch... difficult to gauge ETA due to the 'stuck' diff - which is slowly dropping. should be at some point over the weekend.
You can try solo mining at the switch if you have enough CPU power, however, here's the pool...
http://pool.aquachain-foundation.org:8082/
hope this helps.
Test network blocks/coins will be deleted after fork?
testnet coins stay on testnet.
The testnet pool will switch to mainnet at block 22800 (or maybe 1 or 2 before) to get the party started. There will be a brief downtime during the switch.
Until then, mine the last ethash blocks!
this seems to be all coming together very nicely.
now running full node 24/7.
now running full node 24/7.
Test network blocks/coins will be deleted after fork?
testnet coins stay on testnet.
The testnet pool will switch to mainnet at block 22800 (or maybe 1 or 2 before) to get the party started. There will be a brief downtime during the switch.
Until then, mine the last ethash blocks!
Test network blocks/coins will be deleted after fork?
testnest is 0 block reward anyway, so it make no difference.
get as many Aqua with your GPU before the switch!
Test network blocks/coins will be deleted after fork?
diff should drop a bit after the next few blocks... would be nice to see some serious hashpower back on this coin until HF5
Web wallet always show me "Could not connect to node .....". How to fix it?
Balance() command in console show me my coins, but web wallet balance always show 0.
Ok, i try to remove maw.zip and run HF5 .exe with wallet command - its ok now, show me my balance in web wallet.
Balance() command in console show me my coins, but web wallet balance always show 0.
Ok, i try to remove maw.zip and run HF5 .exe with wallet command - its ok now, show me my balance in web wallet.
On the top right, re-add custom node, make sure to put the chain id: 61717561
The rpc server that spins up when you run the web wallet, it is http://localhost:8543
Thank you for letting me know, I haven't made any changes to the maw.zip since it was first created.
Ok, i try to remove maw.zip and run HF5 .exe with wallet command - its ok now, show me my balance in web wallet.
Web wallet always show me "Could not connect to node .....". How to fix it?
Balance() command in console show me my coins, but web wallet balance always show 0.
Balance() command in console show me my coins, but web wallet balance always show 0.
HF5 at block 22800, switching algo to argon2id
Run the latest release: https://github.com/aquanetwork/aquachain/releases/tag/v1.5.0-rc2
Run with '-testnet' flag to connect to the argonated testnet
Also, see wiki: https://github.com/aquanetwork/aquachain/wiki/Basics
And aquachain has a basic website now: https://aquachain.github.io
Run the latest release: https://github.com/aquanetwork/aquachain/releases/tag/v1.5.0-rc2
Run with '-testnet' flag to connect to the argonated testnet
Also, see wiki: https://github.com/aquanetwork/aquachain/wiki/Basics
And aquachain has a basic website now: https://aquachain.github.io
still GPU mineable?
HF5 at block 22800, switching algo to argon2id
Run the latest release: https://github.com/aquanetwork/aquachain/releases/tag/v1.5.0-rc2
Run with '-testnet' flag to connect to the argonated testnet
Also, see wiki: https://github.com/aquanetwork/aquachain/wiki/Basics
And aquachain has a basic website now: https://aquachain.github.io
Run the latest release: https://github.com/aquanetwork/aquachain/releases/tag/v1.5.0-rc2
Run with '-testnet' flag to connect to the argonated testnet
Also, see wiki: https://github.com/aquanetwork/aquachain/wiki/Basics
And aquachain has a basic website now: https://aquachain.github.io
Is this thing working?
this coin still alive?
Back to CPU mining! Soon... what!!!? 
Currently testing HF5, where we switch from ethash to argon2id
This is to prevent ASIC takeover, E3, etc.
🔌 HF5: Argonated
* Switch POW algorithm to argon2id
* Better testnet (just run with -testnet flag to try the new algo out)
If this PR works as expected, and is merged, HF5 is activated on mainnet on block 22800.
Things to consider while testing:
* Difficulty, rate of change
* Average time
* Lucky blocks frequency
* Choice of argon2d package
* This is super alpha test version. Log output is slightly more verbose than normal.
* Syncing from scratch
* Export chain / Import chain
Currently testing HF5, where we switch from ethash to argon2id
This is to prevent ASIC takeover, E3, etc.
🔌 HF5: Argonated
* Switch POW algorithm to argon2id
* Better testnet (just run with -testnet flag to try the new algo out)
If this PR works as expected, and is merged, HF5 is activated on mainnet on block 22800.
Things to consider while testing:
* Difficulty, rate of change
* Average time
* Lucky blocks frequency
* Choice of argon2d package
* This is super alpha test version. Log output is slightly more verbose than normal.
* Syncing from scratch
* Export chain / Import chain
Jump to: