Author

Topic: [ANN][FLAP] FlappyCoin ★ OLD/DEAD THREAD GO TO NEW ONE ★ - page 208. (Read 345285 times)

legendary
Activity: 1358
Merit: 1093
FlappyCoin paper wallet and scratch game launched!

faucet coming up....

http://coinok.pw
full member
Activity: 210
Merit: 100
I have tried sending a message but it's not working, I have 42k confirmed and about 150k waiting for confirmation, was getting about 50k an hour there last night / this morning, have tried other pools but it's just not working out as well, hopefully it sorts itself out sooner rather than later, or the pool owner notices it.
member
Activity: 114
Merit: 10
Anyone having issues with flappycoinpool.com today? no confirmations of coins (or a block) in a little over two hours :/



I am having same issue Sad
newbie
Activity: 26
Merit: 0
how can I set up an payout address on stablehash when it is grey and not white like the PIN area. also the email confirmations are not workin!!!!!
who is the owner of the pool and how can I contact him today???
full member
Activity: 210
Merit: 100
am into flappy.suchpool.pw

frequent payouts..good hashrate

That's where I have been mining as well, but I went out this morning, came back and it looks like flappycoinpool is stuck, 2.5 hours since last block, tried using the "contact" button and that didn't work, just wondered if anyone else knew anything? have moved over to flap.bondni.com for the time being, but would rather stick to the pool I first joined, I always try and stay with 1 pool for each coin Smiley
newbie
Activity: 8
Merit: 0
am into flappy.suchpool.pw

frequent payouts..good hashrate
full member
Activity: 210
Merit: 100
Anyone having issues with flappycoinpool.com today? no confirmations of coins (or a block) in a little over two hours :/
newbie
Activity: 39
Merit: 0
Want to buy FLAP for 3 sat. 1btc to spend.
newbie
Activity: 2
Merit: 0
put inflapcoin directory under apps... For temporary solution...

AppData\Roaming\Flappycoin

flappycoin.conf

this text below....

testnet=0
listen=1
addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
maxconnections=100
server=1
daemon=1
rpcuser=yourser
rpcpassword=yourpw

rpcconnect=127.0.0.1


this worked for me

Worked for me too. Thanks man.
Worked for me too. Thanks.
full member
Activity: 133
Merit: 100
How to make Windows  FlappQT synchronizing? It is not working for me ...


Is someone using windows version of qt ?? I nned help hot to make it work!

Did you make a .conf file?

this is my .conf file
rpcconnect=127.0.0.1
rpcuser=flappy
rpcpassword=mario
daemon=1
server=1
listen=1
rpcport=11555

addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=173.58.8.110:11556
addnode=101.167.59.225:11556
addnode=86.130.80.214:11556
addnode=99.241.74.216:11556
addnode=151.230.16.60:11556
addnode=98.196.133.57:11556
addnode=5.175.193.221:11556
addnode=87.224.151.220:11556
addnode=113.248.80.57:60784
addnode=203.174.12.17:58713
addnode=101.226.247.43:23943
addnode=62.163.9.155:61354
addnode=119.125.74.62:11556
addnode=162.243.219.6:35963
addnode=209.193.47.249:63062
addnode=205.204.50.88:58740
addnode=78.90.137.167:11556
addnode=173.51.180.254:11556
addnode=81.104.23.219:56855
addnode=83.128.154.201:32800
addnode=74.90.20.137:49909
addnode=83.252.155.158:65197
addnode=217.118.83.186:65269
addnode=108.180.101.26:56827
addnode=99.241.74.216:11556
addnode=71.72.189.203:37666
addnode=95.97.63.134:56647
addnode=115.91.171.92:60277
addnode=50.169.119.194:49559
addnode=50.161.77.201:55100
addnode=174.139.194.205:50331
addnode=146.48.87.114:63946
addnode=130.156.24.211:20069
addnode=94.123.196.157:62211
addnode=70.189.144.40:54638
addnode=78.242.242.22:57521
addnode=88.176.192.78:56344
addnode=82.236.129.31:49274
addnode=50.46.235.36:61906
addnode=221.204.172.65:49596
addnode=94.242.52.199:56582
addnode=24.86.109.154:11556
addnode=121.223.38.24:54350
addnode=58.169.177.19:49882
addnode=70.79.105.55:63422
addnode=75.32.234.140:13116
addnode=110.20.146.223:49458
addnode=65.30.25.96:55255
addnode=178.120.55.198:59821
addnode=70.52.93.180:63339
addnode=61.132.94.251:59336
addnode=173.58.8.110:64613
addnode=2.248.130.3:55877
addnode=106.116.205.80:49342
addnode=61.157.126.1:39139
addnode=124.121.62.223:10271
addnode=1.120.172.130:56303
addnode=184.32.101.153:58305
addnode=50.10.14.134:61177
addnode=173.58.138.157:59853
addnode=60.151.153.242:2926
addnode=71.199.112.21:49265
addnode=128.72.69.237:59086
addnode=58.170.165.44:63734
addnode=65.129.73.133:51476
addnode=50.31.240.238:49875
addnode=86.218.169.246:11556
addnode=99.188.168.230:32572
addnode=198.91.248.4:60567
addnode=50.100.147.117:63423
addnode=113.190.33.106:3190
addnode=129.7.134.228:39332
addnode=174.139.83.252:57023
addnode=86.24.143.245:50828
addnode=208.180.172.73:56638


And it not synchronizing at all ...

where sould I get user and pass? is flappy and mario correct?! Smiley

I had same problem you have to disable the firewall  (adding the qt.exe to exceptions wasnt working for some reason   only full disable works   AND  give it some time to sync  it might start after 20 min
sr. member
Activity: 421
Merit: 250
How to make Windows  FlappQT synchronizing? It is not working for me ...


Is someone using windows version of qt ?? I nned help hot to make it work!

Did you make a .conf file?
....
addnode=174.139.83.252:57023
addnode=86.24.143.245:50828
addnode=208.180.172.73:56638


And it not synchronizing at all ...

where sould I get user and pass? is flappy and mario correct?! Smiley


rpcuser=leafcoinrpc
rpcpassword=HPGv2MxBhv52HaPNcV8yjNmo6sPMEdDsqeV49McmcEnp
legendary
Activity: 2212
Merit: 1199
How to make Windows  FlappQT synchronizing? It is not working for me ...


Is someone using windows version of qt ?? I nned help hot to make it work!

Did you make a .conf file?

this is my .conf file
rpcconnect=127.0.0.1
rpcuser=flappy
rpcpassword=mario
daemon=1
server=1
listen=1
rpcport=11555

addnode=27.3.192.200:11556
addnode=94.22.75.142:11556
addnode=162.243.219.6:46285
addnode=221.121.207.215:11556
addnode=185.27.69.250:57835
addnode=210.229.52.135:1095
addnode=84.229.197.76:4599
addnode=188.40.106.68:35651
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=110.169.60.173:60370
addnode=111.98.41.44:61363
addnode=101.226.247.43:50061
addnode=94.208.110.64:11556
addnode=50.178.24.180:52588
addnode=203.174.12.17:62980
addnode=88.82.176.110:11556
addnode=77.173.110.4:11556
addnode=185.27.69.250:52009
addnode=87.11.234.16:64248
addnode=176.116.104.28:65008
addnode=119.125.183.169:51385
addnode=81.234.144.8:11556
addnode=173.58.8.110:11556
addnode=101.167.59.225:11556
addnode=86.130.80.214:11556
addnode=99.241.74.216:11556
addnode=151.230.16.60:11556
addnode=98.196.133.57:11556
addnode=5.175.193.221:11556
addnode=87.224.151.220:11556
addnode=113.248.80.57:60784
addnode=203.174.12.17:58713
addnode=101.226.247.43:23943
addnode=62.163.9.155:61354
addnode=119.125.74.62:11556
addnode=162.243.219.6:35963
addnode=209.193.47.249:63062
addnode=205.204.50.88:58740
addnode=78.90.137.167:11556
addnode=173.51.180.254:11556
addnode=81.104.23.219:56855
addnode=83.128.154.201:32800
addnode=74.90.20.137:49909
addnode=83.252.155.158:65197
addnode=217.118.83.186:65269
addnode=108.180.101.26:56827
addnode=99.241.74.216:11556
addnode=71.72.189.203:37666
addnode=95.97.63.134:56647
addnode=115.91.171.92:60277
addnode=50.169.119.194:49559
addnode=50.161.77.201:55100
addnode=174.139.194.205:50331
addnode=146.48.87.114:63946
addnode=130.156.24.211:20069
addnode=94.123.196.157:62211
addnode=70.189.144.40:54638
addnode=78.242.242.22:57521
addnode=88.176.192.78:56344
addnode=82.236.129.31:49274
addnode=50.46.235.36:61906
addnode=221.204.172.65:49596
addnode=94.242.52.199:56582
addnode=24.86.109.154:11556
addnode=121.223.38.24:54350
addnode=58.169.177.19:49882
addnode=70.79.105.55:63422
addnode=75.32.234.140:13116
addnode=110.20.146.223:49458
addnode=65.30.25.96:55255
addnode=178.120.55.198:59821
addnode=70.52.93.180:63339
addnode=61.132.94.251:59336
addnode=173.58.8.110:64613
addnode=2.248.130.3:55877
addnode=106.116.205.80:49342
addnode=61.157.126.1:39139
addnode=124.121.62.223:10271
addnode=1.120.172.130:56303
addnode=184.32.101.153:58305
addnode=50.10.14.134:61177
addnode=173.58.138.157:59853
addnode=60.151.153.242:2926
addnode=71.199.112.21:49265
addnode=128.72.69.237:59086
addnode=58.170.165.44:63734
addnode=65.129.73.133:51476
addnode=50.31.240.238:49875
addnode=86.218.169.246:11556
addnode=99.188.168.230:32572
addnode=198.91.248.4:60567
addnode=50.100.147.117:63423
addnode=113.190.33.106:3190
addnode=129.7.134.228:39332
addnode=174.139.83.252:57023
addnode=86.24.143.245:50828
addnode=208.180.172.73:56638


And it not synchronizing at all ...

where sould I get user and pass? is flappy and mario correct?! Smiley
sr. member
Activity: 434
Merit: 250
newbie
Activity: 54
Merit: 0
Quote
!!!IMPORTANT Implement KGW before we hit big exchanges - KGW?

Great news
newbie
Activity: 35
Merit: 0
KGW is implemented. Doing some final tests  Cool

that's fantastic news
newbie
Activity: 15
Merit: 0
might have to mine a few of these!  Shocked
member
Activity: 90
Merit: 10
sr. member
Activity: 308
Merit: 250
EVERYTHING YOU CAN IMAGINE IS REAL
sr. member
Activity: 266
Merit: 250
KGW is implemented. Doing some final tests  Cool
GREAT NEWS
Jump to: