Topic: [ANN][GRA] Graincoin - New PoW/PoS coin | Fast, secure | Version 1.5 Released! - page 100. (Read 177059 times)
January 02, 2014, 05:49:56 PM
Is there a buy/sell thread for Graincoin?
January 02, 2014, 04:27:16 PM
well it worked, i removed what you said and the new wallet started, it found connections in a few seconds.
this is the superblock i found today, 118k of graincoins, (i have approx. 900 kh)
thanks!
http://prntscr.com/2fwk5n
Sadly I can't mine more than 2-12 hours per day as it's my gaming PC and can't leave it on while sleeping (gf says it makes too much noise).
January 02, 2014, 03:17:01 PM
well it worked, i removed what you said and the new wallet started, it found connections in a few seconds.
this is the superblock i found today, 118k of graincoins, (i have approx. 900 kh)
thanks!
http://prntscr.com/2fwk5n
So envy you....
I want to see the purple grain instead of yellow ~
January 02, 2014, 01:42:13 PM
hi all,
i hope someone wants to help me.
i would like to get mining grain again but my wallet cant sync. i have enough connections and the green bar in the bottom shows up with approx. 16000 blocks to go. but it stays at that number and when i start up later i have more blocks to go.
i do not know this problem from any other wallet.
i run the old version of the wallet, the new one says ''unable to load block.dat'' or something like that.
so maybee i need the new wallet? but do not know how to get it working,
or is there something else i could be doing wrong?
thanks for the help.
Remove everything from your User\Appdata\Roaming\Grain folder except wallet.dat and grain.conf if you have a conf file there. Then start 1.2 and it should start working. Make sure you make a copy of wallet.dat so you wont lose it incase something goes wrong.i hope someone wants to help me.
i would like to get mining grain again but my wallet cant sync. i have enough connections and the green bar in the bottom shows up with approx. 16000 blocks to go. but it stays at that number and when i start up later i have more blocks to go.
i do not know this problem from any other wallet.
i run the old version of the wallet, the new one says ''unable to load block.dat'' or something like that.
so maybee i need the new wallet? but do not know how to get it working,
or is there something else i could be doing wrong?
thanks for the help.
well it worked, i removed what you said and the new wallet started, it found connections in a few seconds.
this is the superblock i found today, 118k of graincoins, (i have approx. 900 kh)
thanks!
http://prntscr.com/2fwk5n
January 02, 2014, 12:55:43 PM
How ever this story ends, I'm walking away with stash of cash..
Just depends if it's gonna be big or less big..
Just depends if it's gonna be big or less big..
January 02, 2014, 12:34:47 PM
Any buyers today? Suggest a trade. Up to 245k grain available.
January 02, 2014, 11:08:13 AM
So, how to deal with POS?
What do you mean? January 02, 2014, 01:20:34 AM
So, how to deal with POS?
January 02, 2014, 01:17:23 AM
Neither single tx output nor total tx amount can exceed MAX_MONEY which is defined as 50000000000 grains (see CTransaction::CheckTransaction() in the main.cpp)
Thank you for the answer, In fact, I am not good at Programming,
So, I did not tried to check the software,
In fact, I just be an user ^^
anyway, thank you so much,
YW
January 02, 2014, 01:15:09 AM
Neither single tx output nor total tx amount can exceed MAX_MONEY which is defined as 50000000000 grains (see CTransaction::CheckTransaction() in the main.cpp)
Thank you for the answer, In fact, I am not good at Programming,
So, I did not tried to check the software,
In fact, I just be an user ^^
anyway, thank you so much,
YOP .. lets just take the other newb account/ dev guy's word for it.
Nothing spells trust like "p o n z i".
January 02, 2014, 12:50:21 AM
This is simple. When the output of some tx is selected as an input for the transaction being posted the whole amount of that input is spend during this new tx. The necessary portion is sent to the destination address while the rest is sent to the local address that receives the change. Thus you see this big tx amount in the block. This is normal behavior of the standard wallet. Though, other implementations may differ in respect of where to send the change (they could send change back to the source address), but the full tx amount will be calculated the same way.
Thanks bee7, yes you are right.
January 02, 2014, 12:47:31 AM
Gonna give this a try, looks interesting enough. You never know, maybe I'll get lucky.
98R8bijhudBsizSusSbgeDJTr4tShTGhiX
98R8bijhudBsizSusSbgeDJTr4tShTGhiX
Please request free coins at giveaway thread.
January 02, 2014, 12:40:21 AM
(snip)
If I am, I will try to adjust the number of PoS between PoW to match the target block time,
and reduce the coinage via hashrate increasing,
but, limit the number of PoS block between PoW as 12 or some number,
and, Adjust Diff for PoW,
Anyway, the software itself running good, actually, there is no issues.
In fact, I have trakced couple of pages of block lists, and confirmed.
Just only issue is the managing of PoS block is an issue,
it is unstable, and it shaking whole timeframe.
Especially, Grain retarget Diff by each PoW blocks,
Anyway, PoS generating timming is a kind of trouble maker
If I am, I will try to adjust the number of PoS between PoW to match the target block time,
and reduce the coinage via hashrate increasing,
but, limit the number of PoS block between PoW as 12 or some number,
and, Adjust Diff for PoW,
Anyway, the software itself running good, actually, there is no issues.
In fact, I have trakced couple of pages of block lists, and confirmed.
Just only issue is the managing of PoS block is an issue,
it is unstable, and it shaking whole timeframe.
Especially, Grain retarget Diff by each PoW blocks,
Anyway, PoS generating timming is a kind of trouble maker
You can't fix number of PoS blocks between two PoW blocks, because the PoS is only generated if you have adequate coin-days (and minimum coin hold time). Also in order to generate PoS blocks, you need to run the client.
January 02, 2014, 12:30:18 AM
Neither single tx output nor total tx amount can exceed MAX_MONEY which is defined as 50000000000 grains (see CTransaction::CheckTransaction() in the main.cpp)
Thank you for the answer, In fact, I am not good at Programming,
So, I did not tried to check the software,
In fact, I just be an user ^^
anyway, thank you so much,
January 02, 2014, 12:28:54 AM
Happy New Year everyone! Very happy to see the thread is very active. I will catch up 
January 02, 2014, 12:10:55 AM
Thank you for the explanation, it is so clear,
Can I know how much is the limit for the big transaction ?
Neither single tx output nor total tx amount can exceed MAX_MONEY which is defined as 50000000000 grains (see CTransaction::CheckTransaction() in the main.cpp)
[/quote]
Thank you for the answer, In fact, I am not good at Programming,
So, I did not tried to check the software,
In fact, I just be an user ^^
anyway, thank you so much,
January 02, 2014, 12:02:51 AM
Luv the new update previous wallet did not work for me.
Grain coin looks awesome.
Grain coin looks awesome.
January 01, 2014, 11:46:11 PM
I donnt understand, on the blocks hes saying, why is the tx so huge?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
192 mil is in my account for giveaway and bounties. I don't know why sometimes I sent out a bounty, the whole amount was in the block. Nothing moved except the bounty sent out.
If you look at block 58833, it's a bounty of 100K I sent to d-trix. I don't know why the whole amount move from one address to another. It is still in the same wallet, no address is changed.
Those 5K-20K are giveaways.
https://bitcointalksearch.org/topic/gragrain-giveaway-thread-each-account-gets-5000-to-20000-gras-closed-now-389595
This is simple. When the output of some tx is selected as an input for the transaction being posted the whole amount of that input is spend during this new tx. The necessary portion is sent to the destination address while the rest is sent to the local address that receives the change. Thus you see this big tx amount in the block. This is normal behavior of the standard wallet. Though, other implementations may differ in respect of where to send the change (they could send change back to the source address), but the full tx amount will be calculated the same way.
Thank you for the explanation, it is so clear,
Can I know how much is the limit for the big transaction ?
Neither single tx output nor total tx amount can exceed MAX_MONEY which is defined as 50000000000 grains (see CTransaction::CheckTransaction() in the main.cpp)
January 01, 2014, 07:50:46 PM
I donnt understand, on the blocks hes saying, why is the tx so huge?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
192 mil is in my account for giveaway and bounties. I don't know why sometimes I sent out a bounty, the whole amount was in the block. Nothing moved except the bounty sent out.
If you look at block 58833, it's a bounty of 100K I sent to d-trix. I don't know why the whole amount move from one address to another. It is still in the same wallet, no address is changed.
Those 5K-20K are giveaways.
https://bitcointalksearch.org/topic/gragrain-giveaway-thread-each-account-gets-5000-to-20000-gras-closed-now-389595
This is simple. When the output of some tx is selected as an input for the transaction being posted the whole amount of that input is spend during this new tx. The necessary portion is sent to the destination address while the rest is sent to the local address that receives the change. Thus you see this big tx amount in the block. This is normal behavior of the standard wallet. Though, other implementations may differ in respect of where to send the change (they could send change back to the source address), but the full tx amount will be calculated the same way.
Thank you for the explanation, it is so clear,
Can I know how much is the limit for the big transaction ?
January 01, 2014, 05:03:12 PM
I donnt understand, on the blocks hes saying, why is the tx so huge?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
is 192 million coins the total amount generated so far? it must be more than that...
I don't think there is anything weird going on I just want to learn what is happening.
is it a transfer that is huge or something to do with PoS generation?
192 mil is in my account for giveaway and bounties. I don't know why sometimes I sent out a bounty, the whole amount was in the block. Nothing moved except the bounty sent out.
If you look at block 58833, it's a bounty of 100K I sent to d-trix. I don't know why the whole amount move from one address to another. It is still in the same wallet, no address is changed.
Those 5K-20K are giveaways.
https://bitcointalksearch.org/topic/gragrain-giveaway-thread-each-account-gets-5000-to-20000-gras-closed-now-389595
This is simple. When the output of some tx is selected as an input for the transaction being posted the whole amount of that input is spend during this new tx. The necessary portion is sent to the destination address while the rest is sent to the local address that receives the change. Thus you see this big tx amount in the block. This is normal behavior of the standard wallet. Though, other implementations may differ in respect of where to send the change (they could send change back to the source address), but the full tx amount will be calculated the same way.
Jump to: