Topic: [ANN][ICO] 🔥Tokugawa Coin 🔥 Japanese Masternode 🔥1000% ROI🔥Buy in ICO - page 42. (Read 56997 times)
November 17, 2017, 06:33:43 AM
woot? 74 coins left on ICO phase one? Someone buy that, just to make it end
November 17, 2017, 05:53:01 AM
The estimated ROI for Tokugawa masternode is over 2k%. Is it real? Sounds a little bit unbelievable.
http://mnrank.com/
http://mnrank.com/
We have planned the coin to give 1000% ROI if it has 100 users. Now it has less than 100 MN and so ROI is at 2000%
Please note that such high ROI coins have been there in market earlier too. And they were also not scam.
We are planning to list in 20 days on exchanges.
November 17, 2017, 05:50:10 AM
Wallet shows wrong amount after each POS reward.
Was 3698, got 2.8 and now 3715. Only repairwallet helps.
Was 3698, got 2.8 and now 3715. Only repairwallet helps.
Please make a wallet.dat file backup and then delete Tokugawa folder. Then run the Tokugawa-qt.exe.
A new Tokugawa folder will be created. Then you should replace wallet.dat file with the backup one.
November 17, 2017, 05:07:29 AM
This feels far too good to be true. I won’t start investing in a Tokugawa masternode until the coin is on an exchange. All I see now is Bitcoin being exchanged for TOKs in the ICO and a fun game for people to print their own monopoly money by owning a masternode.
It is awesome if you can get 153 coins / day with a masternode, but if you can’t convert it to Bitcoin, Ethereum, USD or some other coin with real value then what is the point? Sounds like a good deal for the person collecting Bitcoins in the ICO.
Dev, which exchanges have you contacted?
Dev, what are the timelines for trading to commence?
Of course I hope to be wrong about this, but please people BE CAREFUL.
It is awesome if you can get 153 coins / day with a masternode, but if you can’t convert it to Bitcoin, Ethereum, USD or some other coin with real value then what is the point? Sounds like a good deal for the person collecting Bitcoins in the ICO.
Dev, which exchanges have you contacted?
Dev, what are the timelines for trading to commence?
Of course I hope to be wrong about this, but please people BE CAREFUL.
November 17, 2017, 04:11:32 AM
The estimated ROI for Tokugawa masternode is over 2k%. Is it real? Sounds a little bit unbelievable.
http://mnrank.com/
http://mnrank.com/
yes, approximately. for the last week
November 17, 2017, 03:28:08 AM
i dont think that its an uniq ICO, sounds too good/
November 17, 2017, 03:13:19 AM
Hey guys. I want to make an important feedback about the wallet:
Please notice that MN may be started anyway and can look alright, although the ports are closed! Yes, this is a fact. How I know this because I have experienced it. When I have transacted the coins and set up my MN, it has started from the console without any problem but, I could not see my IP on Explorer. Then, when I checked the ports via port signaling websites, I have realized that the ports were actually closed! When you face a trouble just like this case, please download a port mapper software (for example: UPnP Port Mapper or Portty) and make an internal connection by using it.
Have a nice day to all. With greetings...
Please notice that MN may be started anyway and can look alright, although the ports are closed! Yes, this is a fact. How I know this because I have experienced it. When I have transacted the coins and set up my MN, it has started from the console without any problem but, I could not see my IP on Explorer. Then, when I checked the ports via port signaling websites, I have realized that the ports were actually closed! When you face a trouble just like this case, please download a port mapper software (for example: UPnP Port Mapper or Portty) and make an internal connection by using it.
Have a nice day to all. With greetings...
November 17, 2017, 03:06:29 AM
Wallet shows wrong amount after each POS reward.
Was 3698, got 2.8 and now 3715. Only repairwallet helps.
Was 3698, got 2.8 and now 3715. Only repairwallet helps.
November 17, 2017, 03:06:19 AM
how long did you have to wait.
my node has been active for 1d 14h
Good news ! my masternode works coins added , I'm waiting out on the stock exchange and the price to the moon
November 17, 2017, 03:05:40 AM
how to fix my error : not capable masternode: Could not connect to 116.111.141.251:21117 ( my IP)
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports. Remote Ip in this software will be your Internet IP
Yes, finally it works! I have downloaded Portty, added a forwarding to localhost and then started the masternode again. When I checked the MN list on Explorer, I have seen my IP over there.
Thank you so much for your kind suppoert and Slack invitation dear Masternode_Support.
With Regards,
November 17, 2017, 03:02:53 AM
how long did you have to wait.
my node has been active for 1d 14h
Good news ! my masternode works coins added , I'm waiting out on the stock exchange and the price to the moon
November 17, 2017, 01:24:09 AM
Good news ! my masternode works coins added , I'm waiting out on the stock exchange and the price to the moon
November 17, 2017, 12:13:18 AM
🔥🔥🔥ICO Stage 1 has only 285 coins left Thank you for your support and interest guys. We are cancelling some pending orders of 16th November, resulting in addition of the unsold 20k (20000) coins in the Stage 1 @ 50 cents per coin. Grab the coins this time before they go to 75 cents per coin in Stage 2 of ICO 🔥🔥🔥
Thank you for your support and interest guys. We are cancelling some pending orders of 16th November, resulting in addition of the unsold 20k (20000) coins in the Stage 1 @ 50 cents per coin. Grab the coins this time before they go to 75 cents per coin in Stage 2 of ICO 🔥🔥🔥 November 16, 2017, 10:00:37 PM
Very interestIng ! Im in.
November 16, 2017, 09:59:38 PM
Can a masternode be run on any linux distro that is debian based?
My node works on debian.
Awesome thanks!
November 16, 2017, 08:17:54 PM
i got the error
could not bind socket. address and port already in use.
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports. Remote Ip in this software will be your Internet IP
so now im worried that my masternode wont work. i did the test with yougetsignal and port 21117 is closd. i downloaded the sofrware to open ports but dont understand the values ii need to enter.
can anyone help?
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports.
Remote Ip in this software will be your Internet IP
Remote port = 21117, local port also 21117, max connection 2
could not bind socket. address and port already in use.
how to fix my error : not capable masternode: Could not connect to 116.111.141.251:21117 ( my IP)
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports. Remote Ip in this software will be your Internet IP
so now im worried that my masternode wont work. i did the test with yougetsignal and port 21117 is closd. i downloaded the sofrware to open ports but dont understand the values ii need to enter.
can anyone help?
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports.
Remote Ip in this software will be your Internet IP
Remote port = 21117, local port also 21117, max connection 2
November 16, 2017, 08:02:33 PM
Ok i have a trouble call already in with the devs,but wanted to see if anyone else had any ideas. I goofed and in the options I enabled SOCKS Proxy by mistake because after over 800 confirms, I have not gotten one stake. So I was trying everything. Now the wallet has crashed and won't open. I was told to open the Tokugawa.config in a text reader and delete its contents, then save the file again but there are zero contents to delete after I open it. I have my wallet.dat file backed up and have deleted everything related to the wallet. Re-installed it again and it seems the wallet will not create the info thats supposed to be in a new wallet. So after all that, when I open the wallet, it crashes and pops up a window saying error the SOCKS proxy blah blah blah. If anyone has any ideas please let me know. Thanks.
W
W
Sent you message in slack to give me remote access. Please check
November 16, 2017, 08:01:30 PM
how to fix my error : not capable masternode: Could not connect to 116.111.141.251:21117 ( my IP)
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports. Remote Ip in this software will be your Internet IP
so now im worried that my masternode wont work. i did the test with yougetsignal and port 21117 is closd. i downloaded the sofrware to open ports but dont understand the values ii need to enter.
can anyone help?
21117 port should be open. Check if they are open or not on http://Yougetsignal.com/tools/open-ports/ if they are not open then you can use this software http://download.cnet.com/SPI-Port-Forward/3000-2651_4-10764348.html on VPS to open the ports.
Remote Ip in this software will be your Internet IP
Remote port = 21117, local port also 21117, max connection 2
November 16, 2017, 06:26:03 PM
Ok i have a trouble call already in with the devs,but wanted to see if anyone else had any ideas. I goofed and in the options I enabled SOCKS Proxy by mistake because after over 800 confirms, I have not gotten one stake. So I was trying everything. Now the wallet has crashed and won't open. I was told to open the Tokugawa.config in a text reader and delete its contents, then save the file again but there are zero contents to delete after I open it. I have my wallet.dat file backed up and have deleted everything related to the wallet. Re-installed it again and it seems the wallet will not create the info thats supposed to be in a new wallet. So after all that, when I open the wallet, it crashes and pops up a window saying error the SOCKS proxy blah blah blah. If anyone has any ideas please let me know. Thanks.
W
W
November 16, 2017, 05:18:48 PM
well, only 10k coins left at 0.5 cents on ICO... Kinda means it's being successfull, only 4 MNs left for 1250$, not bad.
Jump to: