Pages:
Author

Topic: [ANN][ICO]🌟⚫️Deneum.com🌟⚫️ Ultra-low-cost electricity generation. - page 20. (Read 4802 times)

newbie
Activity: 224
Merit: 0
in my opinion the hard work is mandatory because so that in the future the project can succeed as planned by gaining a lot of support from investors.
newbie
Activity: 28
Merit: 0
This is one of the ideas that should get more attention from the public. They are doing hard work on an actual real world idea. And good work to. So people keep an eye out for them.
legendary
Activity: 1498
Merit: 1030
Given that the only patents listed involve "cold fusion", which has been DEBUNKED a couple decades ago as an experimental error, I have to wonder about the apparent VERY HIGH SCAM LEVEL probability of this.
member
Activity: 406
Merit: 11
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
As far as I know events participation is not a priority for the team right now
Thats strange a little bit. Team usually do all their best to promote their projects amoung mass audience
It can be done through ordinary digital marketing, no need to waste thousands of dollars for useless events.
When that promotion will start? I wish team reached hard cap Grin
It is already ongoing! Team has already reached 1 million USD. Think it would be possible without proper marketing and promotion?
member
Activity: 406
Merit: 10
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
As far as I know events participation is not a priority for the team right now
Thats strange a little bit. Team usually do all their best to promote their projects amoung mass audience
It can be done through ordinary digital marketing, no need to waste thousands of dollars for useless events.
When that promotion will start? I wish team reached hard cap Grin
member
Activity: 406
Merit: 29
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
As far as I know events participation is not a priority for the team right now
Thats strange a little bit. Team usually do all their best to promote their projects amoung mass audience
It can be done through ordinary digital marketing, no need to waste thousands of dollars for useless events.
member
Activity: 406
Merit: 10
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
As far as I know events participation is not a priority for the team right now
Thats strange a little bit. Team usually do all their best to promote their projects amoung mass audience
member
Activity: 406
Merit: 22
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
As far as I know events participation is not a priority for the team right now
brand new
Activity: 0
Merit: 0
Invested in your idea a pretty big sum of money, it looks amazing and I can’t wait for the creators to reveal even more ‘bout it. Кeep the good work! I'll sta tuned for your updates!
member
Activity: 406
Merit: 11
Have the team participated any event already? Conferences/meetups whatever?
Cmmon! Just take a look at the market! Thats the worst time ever for any events participation
jr. member
Activity: 308
Merit: 1
Have the team participated any event already? Conferences/meetups whatever?
member
Activity: 406
Merit: 10
What countries are restricted from participation? And what else restrictions are there? KYC is obligatory?
Yes, KYC is obligatory for everyone. To be honest I dont remember any ICO where there were no KYC
newbie
Activity: 252
Merit: 0
What countries are restricted from participation? And what else restrictions are there? KYC is obligatory?
China and the US i think. They usually being restricted from participation in any ICO.
newbie
Activity: 308
Merit: 0
What countries are restricted from participation? And what else restrictions are there? KYC is obligatory?
newbie
Activity: 7
Merit: 0
I really like your idea, but I think you have to do lot of work, getting permissions from regulatory authority would not be easy.How is that part going so far,any issues or everything is going smooth?
full member
Activity: 490
Merit: 100
Im very curious about your tech. How heat is being transformed into electricity? Where from heat is coming at all? Huh
The interaction in the active body results in excessive heat, which is turned into mechanical energy (electricity) by conventional means. In addition, we use our own innovative methods when transforming heat into electricity to reach the highest possible efficiency.
What metal do you use? Titanium as far as I understand? Why exactly titanium, not copper or gold?
Yes, we use titanium as the absorbing metal.
In technical terms, the deuterium in the capsule is absorbed into a metallic crystal lattice, which is selected from a group of substances in metals that can sufficiently accept hydrogen.
Are you sure that your Power Station is cost effective? I mean you will waste really a lot of energy just for the heating!
I have the same question. Firstly to heat the metal and then maintain the temperature - seems very expesive Power Station. Im not even sure that it will generate more energy that it will use  Shocked
The initial heating takes several minutes and happens only once to start up the Power Station. After that, the Power Station is autonomous or self-sufficient, meaning that it is powered by the
energy it generates.
Okay, understood.
But there is another question: how to power the station? Only via 220v circuit?
The Power Station contains lithium-ion batteries of sufficient capacity to start up the Power Station. If the batteries go flat (after a long period of non-use, for instance), the Power Station can be plugged into a 220v circuit.
so basically you use cold fusion to power up the stations?? Correct?
We wish to avoid assigning any of these terms to the processes that happen within Deneum Power Stations.
Instead, our scientific team is drafting academic explanations that we hope will gain wide acceptance within the global scientific community, as well as prevent the use of any misleading terms.
member
Activity: 406
Merit: 10
Im very curious about your tech. How heat is being transformed into electricity? Where from heat is coming at all? Huh
The interaction in the active body results in excessive heat, which is turned into mechanical energy (electricity) by conventional means. In addition, we use our own innovative methods when transforming heat into electricity to reach the highest possible efficiency.
What metal do you use? Titanium as far as I understand? Why exactly titanium, not copper or gold?
Yes, we use titanium as the absorbing metal.
In technical terms, the deuterium in the capsule is absorbed into a metallic crystal lattice, which is selected from a group of substances in metals that can sufficiently accept hydrogen.
Are you sure that your Power Station is cost effective? I mean you will waste really a lot of energy just for the heating!
I have the same question. Firstly to heat the metal and then maintain the temperature - seems very expesive Power Station. Im not even sure that it will generate more energy that it will use  Shocked
The initial heating takes several minutes and happens only once to start up the Power Station. After that, the Power Station is autonomous or self-sufficient, meaning that it is powered by the
energy it generates.
Okay, understood.
But there is another question: how to power the station? Only via 220v circuit?
The Power Station contains lithium-ion batteries of sufficient capacity to start up the Power Station. If the batteries go flat (after a long period of non-use, for instance), the Power Station can be plugged into a 220v circuit.
so basically you use cold fusion to power up the stations?? Correct?
full member
Activity: 490
Merit: 100
Im very curious about your tech. How heat is being transformed into electricity? Where from heat is coming at all? Huh
The interaction in the active body results in excessive heat, which is turned into mechanical energy (electricity) by conventional means. In addition, we use our own innovative methods when transforming heat into electricity to reach the highest possible efficiency.
What metal do you use? Titanium as far as I understand? Why exactly titanium, not copper or gold?
Yes, we use titanium as the absorbing metal.
In technical terms, the deuterium in the capsule is absorbed into a metallic crystal lattice, which is selected from a group of substances in metals that can sufficiently accept hydrogen.
Are you sure that your Power Station is cost effective? I mean you will waste really a lot of energy just for the heating!
I have the same question. Firstly to heat the metal and then maintain the temperature - seems very expesive Power Station. Im not even sure that it will generate more energy that it will use  Shocked
The initial heating takes several minutes and happens only once to start up the Power Station. After that, the Power Station is autonomous or self-sufficient, meaning that it is powered by the
energy it generates.
Okay, understood.
But there is another question: how to power the station? Only via 220v circuit?
The Power Station contains lithium-ion batteries of sufficient capacity to start up the Power Station. If the batteries go flat (after a long period of non-use, for instance), the Power Station can be plugged into a 220v circuit.
member
Activity: 406
Merit: 10
Im very curious about your tech. How heat is being transformed into electricity? Where from heat is coming at all? Huh
The interaction in the active body results in excessive heat, which is turned into mechanical energy (electricity) by conventional means. In addition, we use our own innovative methods when transforming heat into electricity to reach the highest possible efficiency.
What metal do you use? Titanium as far as I understand? Why exactly titanium, not copper or gold?
Yes, we use titanium as the absorbing metal.
In technical terms, the deuterium in the capsule is absorbed into a metallic crystal lattice, which is selected from a group of substances in metals that can sufficiently accept hydrogen.
Are you sure that your Power Station is cost effective? I mean you will waste really a lot of energy just for the heating!
I have the same question. Firstly to heat the metal and then maintain the temperature - seems very expesive Power Station. Im not even sure that it will generate more energy that it will use  Shocked
The initial heating takes several minutes and happens only once to start up the Power Station. After that, the Power Station is autonomous or self-sufficient, meaning that it is powered by the
energy it generates.
Okay, understood.
But there is another question: how to power the station? Only via 220v circuit?
newbie
Activity: 252
Merit: 0
How will you guys make a revenue?? Thats cool you are conducting ICO but that money wont be enough forever, you will spend them and what then?
Pages:
Jump to: