[ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 1028.

dArkjON

hero member

Activity: 683

Merit: 513

http://bitcoin-engrave.com/ & https://bitcore.cc

Quote from: marco89 on April 29, 2017, 02:33:09 PM

i start thinking that problem is not pool but this fucking coin that must wait 100 block...
24 hours of mining and i got only 0.0027 btx.
i can't reach the minimum payout.
fuck this shitty pool and this shitty coin

Quote from: Slava_K on April 29, 2017, 02:37:18 PM

66 MH at rig, 21-33 at pool, in day mined 67 BTX. But in real it must be 130...

Think about your Mining Power @marco89... One CPU/GPU is not worth Mining in Difficulty like 600

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: Slava_K on April 29, 2017, 02:37:18 PM

66 MH at rig, 21-33 at pool, in day mined 67 BTX. But in real it must be 130...

if you look at the net only yes, but take a look at the diff retarget i don't know if it's fast enough to catch the net, so don't look at the net only

Slava_K

hero member

Activity: 677

Merit: 500

66 MH at rig, 21-33 at pool, in day mined 67 BTX. But in real it must be 130...

marco89

member

Activity: 157

Merit: 10

Quote from: Slava_K on April 29, 2017, 02:07:24 PM

--diff-factor 0.5 or 0.25 Wink

P.S. Not work Huh

Even not shown in pool list...
Hate coinspool. We need second big pool!
And what about hasrates on pool?

i start thinking that problem is not pool but this fucking coin that must wait 100 block...
24 hours of mining and i got only 0.0027 btx.
i can't reach the minimum payout.
fuck this shitty pool and this shitty coin

Lucky - Luciano

hero member

Activity: 711

Merit: 500

Quote from: The Cryptophilanthropist on April 29, 2017, 11:36:54 AM

TO ALL THOSE ASKING ABOUT THE HASHRATE REPORTING I BELIEVE THIS IS THE REASON:

I found this while searching yesterday it is a quote from a NiceHash bulletin:

"Additional notes for users, using some other distributions of ccminer: you should make sure that the distribution is using difficulty multiplier 256. Since some distribution might still use the old multiplier 128 you might get only half speed reported on our miners stats page, compared to the speed, reported by the miner. In this case we recommend you to upgrade to the latest official version (see link above) or else you should use the "--diff 2" parameter."

I believe the miner/pool softwares have not been adjusted since TT10 is new.
Let me know if this works or is correct, thanks.

I tried d = 256 in the .conf file, but does not help.

Slava_K

hero member

Activity: 677

Merit: 500

--diff-factor 0.5 or 0.25 Wink

P.S. Not work Huh

Even not shown in pool list...
Hate coinspool. We need second big pool!
And what about hasrates on pool?

Ale91

member

Activity: 143

Merit: 10

Quote from: The Cryptophilanthropist on April 29, 2017, 12:18:41 PM

Quote from: Dr_Victor on April 29, 2017, 12:08:25 PM

Quote from: The Cryptophilanthropist on April 29, 2017, 11:36:54 AM

TO ALL THOSE ASKING ABOUT THE HASHRATE REPORTING I BELIEVE THIS IS THE REASON:

I found this while searching yesterday it is a quote from a NiceHash bulletin:

"Additional notes for users, using some other distributions of ccminer: you should make sure that the distribution is using difficulty multiplier 256. Since some distribution might still use the old multiplier 128 you might get only half speed reported on our miners stats page, compared to the speed, reported by the miner. In this case we recommend you to upgrade to the latest official version (see link above) or else you should use the "--diff 2" parameter."

I believe the miner/pool softwares have not been adjusted since TT10 is new.
Let me know if this works or is correct, thanks.

Please, solve this problem with low hashrate on pool.

Try changing your miner batch file , add -m 2 and see what happens, use another address so you can monitor, your miner hashrate may show a little lower but it's likely more accurate, let us know

with -m 2 nothing change..worse than before

Kryptowerk

legendary

Activity: 2114

Merit: 1403

Disobey.

Good news: Coins pool minimum payout lowered to 10 BTX. Great move into the right direction.

Quote from: Epsylon3 on April 29, 2017, 01:16:36 PM

well fine, except BTX (Bitcoin TX) already exists on c-cex

BCX seems ok

Well, their twitter hasn't been active for 1,5 years, so maybe CMC will just remove the old one? https://twitter.com/btxcoin
I am not sure, but a $5 daily volume... seems pretty dead to me.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

well fine, except BTX (Bitcoin TX) already exists on c-cex

BCX seems ok

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: Dr_Victor on April 29, 2017, 12:08:25 PM

Quote from: The Cryptophilanthropist on April 29, 2017, 11:36:54 AM

TO ALL THOSE ASKING ABOUT THE HASHRATE REPORTING I BELIEVE THIS IS THE REASON:

I found this while searching yesterday it is a quote from a NiceHash bulletin:

"Additional notes for users, using some other distributions of ccminer: you should make sure that the distribution is using difficulty multiplier 256. Since some distribution might still use the old multiplier 128 you might get only half speed reported on our miners stats page, compared to the speed, reported by the miner. In this case we recommend you to upgrade to the latest official version (see link above) or else you should use the "--diff 2" parameter."

I believe the miner/pool softwares have not been adjusted since TT10 is new.
Let me know if this works or is correct, thanks.

Please, solve this problem with low hashrate on pool.

Try changing your miner batch file , add -m 2 and see what happens, use another address so you can monitor, your miner hashrate may show a little lower but it's likely more accurate, let us know

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: The Cryptophilanthropist on April 29, 2017, 11:36:54 AM

TO ALL THOSE ASKING ABOUT THE HASHRATE REPORTING I BELIEVE THIS IS THE REASON:

I found this while searching yesterday it is a quote from a NiceHash bulletin:

"Additional notes for users, using some other distributions of ccminer: you should make sure that the distribution is using difficulty multiplier 256. Since some distribution might still use the old multiplier 128 you might get only half speed reported on our miners stats page, compared to the speed, reported by the miner. In this case we recommend you to upgrade to the latest official version (see link above) or else you should use the "--diff 2" parameter."

I believe the miner/pool softwares have not been adjusted since TT10 is new.
Let me know if this works or is correct, thanks.

Please, solve this problem with low hashrate on pool.

LemonAndFriesOne

legendary

Activity: 1050

Merit: 1000

Ok so I have supported BSD when it changed from Limecoin

What is this new project from you that I need to know about?

How do I join?

Neon~

sr. member

Activity: 275

Merit: 250

Quote from: Limx Dev on April 29, 2017, 05:59:54 AM

Quote from: Limx Dev on April 29, 2017, 04:32:43 AM

Hello,

our testnet is now online. I have here 10x10000 Testnetcoins.

1,"1A5HmGnJmKzv63TRqubdD55HAL9FKm1Mpt","5JpkgogtMDPAWkh3BBK6wKZ86t3XJUvjZJF5BtvCiRtkEyYGoaN"
2,"168HaFevx3A8aaYApPkLpFDYcBxFQCRrAH","5HqLnYDwzeqCsZdNo8sCKhghQCcMqmzY6CDDB5dCr5WHmtgpMVf"
3,"1AYTnfkzfsnqnL2ovqXJL8iYfZy4HtRy6U","5JbQfApgVHMp8ZmAiK114Ybh2XPFFwCKVg53NeEo7Vk2ns5FppM"
4,"1ALGhj8CkAYUSn2s5xfU9JKmeRAzqCb41o","5K27pNApH3bKXv4vkGUZiQEzsEkiq6ZRpo6VFAqtpbjZf7HN7a7"
5,"1FQRbNWEUuFnpFExn4bsXYK1bUBugVTfoz","5JX7KoeJ3aGsguTkkWc1ERQAy4hBL1wwZAM52Pm1jPgoXHj59Ma"
6,"1Bz9Pv6oQqo6iDHgmt5DiXeaqM9oPMCRGr","5KVLWi4x4EQVARSvUaL8iUp1CEJaCSsmXneRgT3EtKUG1WDWCeD"
7,"1hNwMBsRQtQ8P4xyw9GTPLxavQzYA4qYU","5J9AwCHkBvcW5xeoZw3cNrmz3y4Aowcw8TVXTW2X2Rb4A8btafQ"
8,"1MUVPMcN5T7jZwcjSfCASbbcVpJNrg8e2o","5K8bUXvdEBdBjjJbYx9Ge2PsBo4erZHQ6PXauJfuDfpNJGZcvva"
9,"1Ma3jxD5kkLJLHB2AwQ1uD4DtGXVhSKAXL","5J4yhyQPs7qGgX8zBnbXoiDN2PCE5dBJdQiM9iZPREDuVqHmggA"
10,"1BUvBJtiMPgE1HrKTDn2YURhb13UGjmuug","5Jo9gbFFFNLDYHqrwApb35oEHFpLbvn72dbifCGSAQjNM5AEcjf"

Please note! (The testnet isn't compatible to mainnet. Do not send mainnet BTX to our testent.)

Please use "-testnet" for start.

Kind Regards Christian

addnode=37.120.186.85
addnode=188.68.52.172
addnode=37.120.190.76

Version 0.14.0.1

Coin dev, I am not seeing any connections in testnet. Tried adding the above nodes, any other nodes available to try for testnet?

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

TO ALL THOSE ASKING ABOUT THE HASHRATE REPORTING I BELIEVE THIS IS THE REASON:

I found this while searching yesterday it is a quote from a NiceHash bulletin:

"Additional notes for users, using some other distributions of ccminer: you should make sure that the distribution is using difficulty multiplier 256. Since some distribution might still use the old multiplier 128 you might get only half speed reported on our miners stats page, compared to the speed, reported by the miner. In this case we recommend you to upgrade to the latest official version (see link above) or else you should use the "--diff 2" parameter."

I believe the miner/pool softwares have not been adjusted since TT10 is new.
Let me know if this works or is correct, thanks.

andrew24p

sr. member

Activity: 378

Merit: 250

Quote from: Kryptowerk on April 29, 2017, 10:46:05 AM

Quote from: andrew24p on April 29, 2017, 10:39:17 AM

Quote from: ol92 on April 29, 2017, 10:29:44 AM

Quote from: ol92 on April 29, 2017, 09:24:57 AM

Hello,
Mining in the official pool with 3 GTX1080/1080ti with my bitcore wallet adress, I see 50-70mh/s hashrate on pool side on http://coinspool.cu.cc/workers_bitcore but even after 12H and 100% accepted share, the balance stay at 0. Is this normal ?

It seems you will not have credits till you personnaly find a block ...

Is that even really a pool then ?

This is incorrect. It just takes 100 blocks to validate the new mined blocks in BTX, only then will they be added according to your networks share to your balance.
An example: You mine for say 70 blocks and then stop. Now 100 blocks later (at the 171th block from the starting point of you mining) your blocks will be transfered to your balance, one by one until all your 70 blocks are converted to your balance.

okay cool, good to see

Kryptowerk

legendary

Activity: 2114

Merit: 1403

Disobey.

Quote from: andrew24p on April 29, 2017, 10:39:17 AM

Quote from: ol92 on April 29, 2017, 10:29:44 AM

Quote from: ol92 on April 29, 2017, 09:24:57 AM

Hello,
Mining in the official pool with 3 GTX1080/1080ti with my bitcore wallet adress, I see 50-70mh/s hashrate on pool side on http://coinspool.cu.cc/workers_bitcore but even after 12H and 100% accepted share, the balance stay at 0. Is this normal ?

It seems you will not have credits till you personnaly find a block ...

Is that even really a pool then ?

This is incorrect. It just takes 100 blocks to validate the new mined blocks in BTX, only then will they be added according to your networks share to your balance.
An example: You mine for say 70 blocks and then stop. Now 100 blocks later (at the 171th block from the starting point of you mining) your blocks will be transfered to your balance, one by one until all your 70 blocks are converted to your balance.

istsarenko

newbie

Activity: 12

Merit: 0

Quote from: ol92 on April 29, 2017, 09:24:57 AM

Hello,
Mining in the official pool with 3 GTX1080/1080ti with my bitcore wallet adress, I see 50-70mh/s hashrate on pool side on http://coinspool.cu.cc/workers_bitcore but even after 12H and 100% accepted share, the balance stay at 0. Is this normal ?

wait about 12-14 hours

andrew24p

sr. member

Activity: 378

Merit: 250

Quote from: ol92 on April 29, 2017, 10:29:44 AM

Quote from: ol92 on April 29, 2017, 09:24:57 AM

Hello,
Mining in the official pool with 3 GTX1080/1080ti with my bitcore wallet adress, I see 50-70mh/s hashrate on pool side on http://coinspool.cu.cc/workers_bitcore but even after 12H and 100% accepted share, the balance stay at 0. Is this normal ?

It seems you will not have credits till you personnaly find a block ...

Is that even really a pool then ?

ol92

sr. member

Activity: 445

Merit: 255

Quote from: ol92 on April 29, 2017, 09:24:57 AM

Hello,
Mining in the official pool with 3 GTX1080/1080ti with my bitcore wallet adress, I see 50-70mh/s hashrate on pool side on http://coinspool.cu.cc/workers_bitcore but even after 12H and 100% accepted share, the balance stay at 0. Is this normal ?

It seems you will not have credits till you personnaly find a block ...

kamikaza

sr. member

Activity: 597

Merit: 250

Is there also another pool available?

I dont get the http://coinspool.cu.cc one... should i use my wallet address or this key generator thing?

Topic: [ANN][Main] Bitcore- BTX - Datacarriersize up to 220 bytes - page 1028. (Read 730398 times)