[ANN][MOON] Mooncoin: You know where it's headed! KGW exploit FIXED 4/3/2014 - page 489.

customxyz

newbie

Activity: 56

Merit: 0

Quote from: bakedraccoon on December 30, 2013, 12:56:14 PM

Quote from: bakedraccoon on December 30, 2013, 12:20:54 PM

I present to you: Scryptminer.nl

1% fee, 0% for the first 20 miners ( claim in the support section ).
VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

We opened up extra spots for 0% fee, register now and claim your 0% fee through the support section.

registered, claimed through the support section, messaged you, id = 50

anoncoinpoolnet

newbie

Activity: 7

Merit: 0

First 30 Users NO Fee

Stratum + VarDiff Mooncoin Pool | 0% Fee - http://weminemoon.com - Registration are opened!

setup your miners to: stratum+tcp://nl.weminemoon.com:3333

Server Info:

DDoS Protected Server
1Gbps Download/Upload
Intel Xeon E3-1240 | 8 x 3.7 Ghz
8,192 MB RAM
SSD Drive
99.9% Uptime
Since: 17th December 2013
Powereded By Linux - Debian

Stratum Servers:
Europe, Netherlands: stratum+tcp://nl.weminemoon.com:3333
USA, Los Angeles: stratum+tcp://la.weminemoon.com:3333

Why Us?
0% Fee Accepting only donations!
NO ADS
SSL Secured Website
DDoS Protected Server
Constantly improving and adding more features
Reward type: Proportional - When a block is found, the reward is distributed among all workers proportionally to how many shares each of them has found.

LitecoinRates

newbie

Activity: 42

Merit: 0

Quote from: mamucik666 on December 30, 2013, 12:52:49 PM

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

I wrote a solo-mining setup guide for QQcoin here: solo mining guide

It will basically be the same just change the ports (when confirmed), your UN and password (can be anything) and add node addresses.

killver

newbie

Activity: 49

Merit: 0

Quote from: atp1916 on December 30, 2013, 12:55:42 PM

Quote from: mdawg on December 30, 2013, 12:54:49 PM

wow difficulty is already at 4.5. Thank god I started when it was 0.02

What?

troll

svennand

sr. member

Activity: 462

Merit: 250

Quote from: atp1916 on December 30, 2013, 12:55:42 PM

Quote from: mdawg on December 30, 2013, 12:54:49 PM

wow difficulty is already at 4.5. Thank god I started when it was 0.02

What?

Lol someone is trolling

singula

sr. member

Activity: 462

Merit: 251

Quote from: mdawg on December 30, 2013, 12:54:49 PM

wow difficulty is already at 4.5. Thank god I started when it was 0.02

What? It is already online? It started EARLY?

bakedraccoon

newbie

Activity: 42

Merit: 0

Quote from: bakedraccoon on December 30, 2013, 12:20:54 PM

I present to you: Scryptminer.nl

1% fee, 0% for the first 20 miners ( claim in the support section ).
VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

We opened up extra spots for 0% fee, register now and claim your 0% fee through the support section.

atp1916

legendary

Activity: 854

Merit: 1000

Quote from: mdawg on December 30, 2013, 12:54:49 PM

wow difficulty is already at 4.5. Thank god I started when it was 0.02

What?

lucoia

full member

Activity: 126

Merit: 100

Quote from: LitecoinRates on December 30, 2013, 12:49:12 PM

Quote from: pttinh on December 30, 2013, 12:40:45 PM

Quote from: bakedraccoon on December 30, 2013, 12:33:07 PM

Quote from: bakedraccoon on December 30, 2013, 12:20:54 PM

I present to you: Scryptminer.nl

1% fee, 0% for the first 20 miners ( claim in the support section ).
VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

Already set 5 people's fee to 0%, join fast and request your 0% fee in the support section!

ID 16, thanks

id 34 thanks!

id 48 registered and 2 miners already ready for the liftoff Cheesy

singula

sr. member

Activity: 462

Merit: 251

Quote from: buddynuno on December 30, 2013, 12:37:06 PM

How the heck pools know what kind of scrypt miner is gonna be used?

They'll know once they get and compile the source and plug it in their mining pools (so it may take a minute or two after the release for the pools to start functioning). But the devs have said in the first post "Algorithm: scrypt". So the algo is known in advance

If they'll put in some nasty surprise (like using scrypt-jane with some obscure parameters), then I'll guess the rocket won't make it to the moon and will just explode on the launch pad in a huge ball of fire.

IainKay

newbie

Activity: 49

Merit: 0

A message to all users of HashAddicts.net:

Support is available from #HashAddicts on FreeNode.

If you cannot login to the website then please contact us on IRC and we'll get you sorted. We're also ensuring that any locked accounts are automatically, regularly, unlocked before the launch. If you cannot login then contact us, or try again in a little while.

Also, if you have visited both moon.hashaddicts.net and hashaddicts.net ltc pool, and logged into both, then clear all cookies before attempting to login to the moon pool again. If this doesn't work, contact support.

svennand

sr. member

Activity: 462

Merit: 250

Quote from: Zombie123 on December 30, 2013, 12:09:38 PM

Quote from: Kergekoin on December 30, 2013, 12:06:10 PM

Quote from: LitecoinRates on December 30, 2013, 12:01:06 PM

Quote from: Quicken1337 on December 30, 2013, 11:59:44 AM

So i just use this on multipool

stratum+tcp://pool1.eu.multipool.us:3358 ?

Is that right?

Cheers

that's what I have too

Is it confirmed that multipool moon EU server will work at launch?

Even if it doesnt set it up as your mail pool if thats the nearest. and fallback to US

Is this confirmed to be the right port and node address?

eddied316

full member

Activity: 198

Merit: 100

Quote from: mamucik666 on December 30, 2013, 12:52:49 PM

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

yep. You can also use 127.0.0.1 instead of local host. both work though.

Make sure you set the rpcport in the conf file and the cgminer bat file.

mdawg

sr. member

Activity: 278

Merit: 250

wow difficulty is already at 4.5. Thank god I started when it was 0.02

dquancey

hero member

Activity: 587

Merit: 500

Quite a few pools and interest in MOON eh.
Will see how this goes.

Pustul

sr. member

Activity: 350

Merit: 250

What will be the difficulty at start?

TheMiningHorst

newbie

Activity: 10

Merit: 0

What's the correct port at Scryptminer.nl?

thanks

mamucik666

newbie

Activity: 42

Merit: 0

So... to start solo mining when the windows wallet comes out, I have to:
- run it with "--server" command
- set the rpcallowip in the .conf file to "localhost"
- set username and password
- set up cgminer to use these settings
Is this all I need to do? I'm new to solo mining and I would be grateful if somebody could confirm/correct that. Thanks is advance!
Also, what port should I use?

Cyriaque5962

full member

Activity: 140

Merit: 100

Quote from: stoneset on December 30, 2013, 12:38:46 PM

How do I mine this with Cudaminer?

Will reward for help with MOON accordingly.

First you must register on one of the pools.
For example, if you register on MoonCoinPool.com, in the cudaminer folder, you must create a file.bat (for example Moon.bat). In this file, you edit and paste that :
cudaminer.exe -o stratum+tcp://mooncoinpool.com:3334 -u Youraccountnameonthepool.yourworkernameontheppol-p yourworkerpasswordonthepool

bakedraccoon

newbie

Activity: 42

Merit: 0

Quote from: TheMiningHorst on December 30, 2013, 12:33:44 PM

Quote from: bakedraccoon on December 30, 2013, 12:20:54 PM

I present to you: Scryptminer.nl

1% fee, 0% for the first 20 miners ( claim in the support section ).
VARDIFF Enabled, PROP payout. It will be better at launch than PPLNS
8 CORE 32 GB 10Gbps Server

Sign up here: www.scryptminer.nl

We launch as soon as the sourcecode comes out!

User ID 9. Thanks guys, this will be my primary MOON Pool Wink

I can't find your user id, please provide me with your account name and I will set your fee to 0% !

Topic: [ANN][MOON] Mooncoin: You know where it's headed! KGW exploit FIXED 4/3/2014 - page 489. (Read 1106885 times)