Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 113.

S4VV4S

hero member

Activity: 1582

Merit: 502

Quote from: ineedit on January 30, 2014, 02:25:56 PM

Quote from: meornot69 on January 30, 2014, 02:25:11 PM

i have a problem, and i wonder if anyone got the same issue
after 2 days of mining i start to get errors on both miners 2 antiminers s1:
ooxxxooo oxoxoxxo oooxoooo oxxooooo

On BTC Guild, i have the same hash rate.

After a reboot, the errors goes away, and i can mine again for 2 days or so...

Ignore them it is just a display bug.

I agree. If your hashrates are fine the X does not mean anything.
However if you keep getting that error check your PSU.
That error is listed in the antiminer setup and troubleshoot guide: https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970

cander

newbie

Activity: 7

Merit: 0

Quote from: jgm_coin on January 29, 2014, 02:05:42 AM

video if you are waiting for your antminer:

http://tmblr.co/ZJrlZv15nbjhw

Hi,

So you have one AntMiner S1 ?

DO you suggest to buy it or an other seller having products available ?

Regards

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: meornot69 on January 30, 2014, 02:25:11 PM

i have a problem, and i wonder if anyone got the same issue
after 2 days of mining i start to get errors on both miners 2 antiminers s1:
ooxxxooo oxoxoxxo oooxoooo oxxooooo

On BTC Guild, i have the same hash rate.

After a reboot, the errors goes away, and i can mine again for 2 days or so...

Ignore them it is just a display bug.

meornot69

member

Activity: 87

Merit: 10

i have a problem, and i wonder if anyone got the same issue
after 2 days of mining i start to get errors on both miners 2 antiminers s1:
ooxxxooo oxoxoxxo oooxoooo oxxooooo

On BTC Guild, i have the same hash rate.

After a reboot, the errors goes away, and i can mine again for 2 days or so...

S4VV4S

hero member

Activity: 1582

Merit: 502

Quote from: gmaxwell on January 30, 2014, 12:27:15 PM

Quote from: S4VV4S on January 30, 2014, 12:24:31 PM

Why do you think they are in stock and dropping on price constantly?

None of the antminers I've received showed the slightest evidence of being used. The reason they are dropping prices is that they're selling these things near or beyond the boundary of profitability, and so as more hashrate increasing days go by they need to lower the price to keep it from being an obvious loss to everyone.

My miner didn't show signs of being used either, and I am planning of ordering more.
Don't get me wrong but I am not stupid.

And when this guy: http://eligius.st/~wizkid057/newstats/userstats.php/1Nbq2XZaRsKknf5fcT2wTXvBS31PaUWSeX

Had a mining power of 252TH 2 weeks from now, 2 days from now more than 520TH and today only 450TH (btw 3 hours before it was 490), then don't tell me pre-order or any kind of mining equipment has not been used yet. For the sake of testing purposes let's say Roll Eyes

Let's be honest here, it's nothing personal it's just business.
You would have done the same.

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: giletto on January 30, 2014, 04:50:26 AM

DiffS is always =0 so what is your DiffS? I never see another number then 0. So why you want add 0? Grin

Oh if but that was only true, perhaps yours are not up long enough or my piece of string to the Internet is just too slow Cheesy

Some of my ant's do not have any DiffS but some do when you leave them running

gmaxwell

staff

Activity: 4284

Merit: 8808

Quote from: S4VV4S on January 30, 2014, 12:24:31 PM

Why do you think they are in stock and dropping on price constantly?

None of the antminers I've received showed the slightest evidence of being used. The reason they are dropping prices is that they're selling these things near or beyond the boundary of profitability, and so as more hashrate increasing days go by they need to lower the price to keep it from being an obvious loss to everyone.

S4VV4S

hero member

Activity: 1582

Merit: 502

Quote from: giletto on January 30, 2014, 11:53:45 AM

Nothing new released yet.

They are selling the Antminers to make room for the 2TH+ miners Wink

Why do you think they are in stock and dropping on price constantly?

giletto

sr. member

Activity: 812

Merit: 250

Nothing new released yet.

arorts

sr. member

Activity: 408

Merit: 250

Are there any newer boards made by Antminer or are they still selling the same S1 180 Gh/s miners?

giletto

sr. member

Activity: 812

Merit: 250

DiffS is always =0 so what is your DiffS? I never see another number then 0. So why you want add 0? Grin

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: giletto on January 30, 2014, 12:01:17 AM

Quote from: BuildTheFuture on January 29, 2014, 10:07:06 PM

Quote from: pjviitas on January 29, 2014, 09:19:48 PM

My latest one has more HW errors than accepted work however my pool stats say its doing fine.

Right, to get a better sense of the HW error percentage, you have to divide the HW number by: (HW + DiffA + DiffR + DiffS)

At least that's what I've read.

Where is the devision?

The right formula is HW/(HW+DiffA+DiffR)%

You are missing the DiffS giletto, the little buggers sneak in slowly over days whilst your back is turned Cheesy

HW / (HW + DiffA + DiffR + DiffS) = %

miter_myles

hero member

Activity: 742

Merit: 500

Quote from: BuildTheFuture on January 30, 2014, 12:00:10 AM

Yeah, site was down, now back up.

back up it seems

giletto

sr. member

Activity: 812

Merit: 250

Quote from: BuildTheFuture on January 29, 2014, 10:07:06 PM

Quote from: pjviitas on January 29, 2014, 09:19:48 PM

My latest one has more HW errors than accepted work however my pool stats say its doing fine.

Right, to get a better sense of the HW error percentage, you have to divide the HW number by: (HW + DiffA + DiffR + DiffS)

At least that's what I've read.

Where is the devision?

The right formula is HW/(HW+DiffA+DiffR)%

BuildTheFuture

full member

Activity: 195

Merit: 100

Yeah, site was down, now back up.

jjiimm_64

legendary

Activity: 1876

Merit: 1000

anyone else having trouble getting to the bitmain site?

eoakland

hero member

Activity: 699

Merit: 504

Thank you....ok, apparently my hash rate is not that far off, I am missing like 20gh/s which is typical variance. I have never had a device that
has had such a high HW error rate---so I spooked me. especially since these devices are super expensive and timing is everything. apologies to all for me hitting the "panic button" =)

I totally have egg on my face....doh !

pjviitas

sr. member

Activity: 434

Merit: 250

BuildTheFuture

full member

Activity: 195

Merit: 100

Quote from: pjviitas on January 29, 2014, 09:19:48 PM

My latest one has more HW errors than accepted work however my pool stats say its doing fine.

Right, to get a better sense of the HW error percentage, you have to divide the HW number by: (HW + DiffA + DiffR + DiffS)

At least that's what I've read.

Easy2Mine

hero member

Activity: 854

Merit: 500

einc.io

Slush stats are slow if you just connect to it, but it is a reliable pool and it is also the first Bitcoin pool.
Let it run for a while, probably there is nothing wrong with your Ant.
If you want fast stats, check Ghash or BTCGuild and Elisius.

Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 113. (Read 368330 times)