Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 26.

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: R4v37 on August 30, 2014, 09:04:47 PM

Quote from: btcmner on August 30, 2014, 05:03:54 PM

Quote from: BITMAIN on August 30, 2014, 10:55:07 AM

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Nice ! :-)
So the S2 upgrade kit you were talking of about a couple of months ago is going to be released soon ?

really??? re u just making up ur post or what?
we're talkin bout S3 and S4, nothing bout S2 upgrade kit bro...

derp - S4 & S2 'upgrade' will use the same or VERY similar blades...

kinda obvious

techman05

hero member

Activity: 546

Merit: 500

Quote from: Miasma on August 30, 2014, 10:42:06 AM

Quote from: samsonn25 on August 28, 2014, 01:12:46 PM

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Unfortunately the expected ROI for the sp31 is only about 1.5 btc when it comes out. Everyone is late to the party.

What's an L1 Huh

Dang I thought I was going to be first to ask that :p

mazedk

sr. member

Activity: 457

Merit: 250

Quote from: Miasma on August 31, 2014, 04:46:24 AM

Quote from: BITMAIN on August 30, 2014, 10:55:07 AM

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Dear Miasma,

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Look forward to hearing it. I guess your competition is Hashra: http://hashra.com/moonrakerwarp3/

not really no.. Thats just 3x 1ths boxes.. if you read their description a moonrakerwarp3 = 3x moonraker boxes. So you'll spend 12u for 3ths.. thats been done for a long time.

Miasma

member

Activity: 110

Merit: 10

Quote from: BITMAIN on August 30, 2014, 10:55:07 AM

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Dear Miasma,

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Look forward to hearing it. I guess your competition is Hashra: http://hashra.com/moonrakerwarp3/

icodestuff

newbie

Activity: 44

Merit: 0

Can you give any information on the Antminer L1?

Am I correct in thinking this is Bitmain's entry into SCRYPT mining hardware Shocked

R4v37

sr. member

Activity: 266

Merit: 250

Quote from: btcmner on August 30, 2014, 05:03:54 PM

Quote from: BITMAIN on August 30, 2014, 10:55:07 AM

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Nice ! :-)
So the S2 upgrade kit you were talking of about a couple of months ago is going to be released soon ?

really??? re u just making up ur post or what?
we're talkin bout S3 and S4, nothing bout S2 upgrade kit bro...

btcmner

full member

Activity: 132

Merit: 100

Quote from: BITMAIN on August 30, 2014, 10:55:07 AM

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Nice ! :-)
So the S2 upgrade kit you were talking of about a couple of months ago is going to be released soon ?

adqsonline

newbie

Activity: 41

Merit: 0

I can access all my pages of my ant s3 in the control board except the miner status page. Does anyone knows how to fix it? Thanks.

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Dear Miasma,

We are waiting for testing results of the S4 sample machine. Hopefully there will be good news before next Tuesday.

Miasma

member

Activity: 110

Merit: 10

Quote from: samsonn25 on August 28, 2014, 01:12:46 PM

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Unfortunately the expected ROI for the sp31 is only about 1.5 btc when it comes out. Everyone is late to the party.

That's what I thought. What about paying for an S3 a month in advance Huh

What's an L1 Huh

techman05

hero member

Activity: 546

Merit: 500

Bitmain, do we have any idea what the stock is for s3+ and how soon a batch 9 is afterward. If you hadn't stopped selling s3's I wouldn't have this question.

You've given me too much time to think and I swinging back and forth at stocks vs bitcoin Wink

though I'll probably fall to the darkside of bitcoin[sha256].

EnderXi

newbie

Activity: 5

Merit: 0

Quote

I can only tell that I've been using this PSU to power each of my S3, one connector per blade, without any issues:

http://www.corsair.com/en-us/cx-series-cx600m-modular-atx-power-supply-600-watt-80-plus-bronze-certified-modular-psu

And I overclock them to 500 GH/s Cheesy

Sounds good to me, if that 1300w EVGA can power 3 blades overclocked to 500GH/s should be the one for me at least, i will have a look and see if i can get that corsair 600w one cheap as well.

Trimegistus

legendary

Activity: 1564

Merit: 1027

Quote from: adqsonline on August 29, 2014, 08:17:26 AM

Quote from: adqsonline on August 28, 2014, 01:07:01 PM

Quote from: adqsonline on August 28, 2014, 01:01:37 PM

Help please.

I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.

I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.

Does anyone knows why this could happen?

Thank you.

In addiction the psu i use in each blade is about 600w

Any help please?

I can only tell that I've been using this PSU to power each of my S3, one connector per blade, without any issues:

http://www.corsair.com/en-us/cx-series-cx600m-modular-atx-power-supply-600-watt-80-plus-bronze-certified-modular-psu

And I overclock them to 500 GH/s Cheesy

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: adqsonline on August 28, 2014, 01:07:01 PM

Quote from: adqsonline on August 28, 2014, 01:01:37 PM

Help please.

I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.

I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.

Does anyone knows why this could happen?

Thank you.

In addiction the psu i use in each blade is about 600w

Any help please?

samsonn25

hero member

Activity: 882

Merit: 1003

Quote from: Miasma on August 28, 2014, 09:00:13 AM

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Unfortunately the expected ROI for the sp31 is only about 1.5 btc when it comes out. Everyone is late to the party.

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: adqsonline on August 28, 2014, 01:01:37 PM

Help please.

I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.

I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.

Does anyone knows why this could happen?

Thank you.

In addiction the psu i use in each blade is about 600w

adqsonline

newbie

Activity: 41

Merit: 0

Help please.

I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.

I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.

Does anyone knows why this could happen?

Thank you.

Miasma

member

Activity: 110

Merit: 10

Dear Mister BitMan,

We need to know when to expect the S4 Huh

Absent news it's time to buy SP31s.

Miasma

member

Activity: 110

Merit: 10

Quote from: Zelek Uther on August 19, 2014, 03:51:57 PM

Any news on the S4?

And by "S4" I mean like an S2, except using the 28nm BM1382 ASICs.

Yes, we to know, when can we expect the S4 Huh

adqsonline

newbie

Activity: 41

Merit: 0

Quote from: samsonn25 on August 28, 2014, 04:18:17 AM

Power efficiency is important if you plan on using 1 year or more, the EVGA can make it back. And better re sell value.

1000 watts use with Gold versus Plus PSU saves 100 watts per hour, at 24/7 for 1 year is $140.00 usd savings if your electricity cost is .16/kw

Any links to buy into Portugal-Europe? Thanks.

Topic: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip - page 26. (Read 368266 times)