Topic: [ANN][P2POOL] p2pool nodes on p2p-usa.xyz(Chicago) - page 4. (Read 23161 times)

First post updated https://bitcointalksearch.org/topic/m.19625359

More nodes for ASIC, GPU, CPU

New Chicago server installed and configured.

IP address changed from 144.48.104.74 to 66.151.242.154

If you set your miners to domain name (p2p-usa.xyz) then you do not need to change anything

If the IP address(144.48.104.74) is set in the settings of your miners, then replace it with a domain name.

After updating the DNS servers, all miners will automatically move to the new server.

Many new nodes are running on the new server (for ASIC, GPU, CPU)

New p2pool nodes for GPU coin - Argoneum, PHI2 algo

Spb - http://p2p-spb.xyz:3035/static/
Ekb - http://p2p-ekb.xyz:3035/static/
Rov - http://p2p-south.xyz:3035/static/
Chicago - http://p2p-usa.xyz:3035/static/

Mining ONLY local wallet!

Dear miners!

New p2pool for you - Bitcoin Core

Nodes:

Spb(RU)- http://sha256.p2p-spb.xyz:3031/static/
Ekb(RU) - http://p2p-ekb.xyz:3031/static/
Rov(RU) - http://p2p-south.xyz:3031/static/
Chicago(USA) - http://p2p-usa.xyz:3031/static/

New version firmware for S9 by VNISH special for my SHA256 nodes.

RELEASE 3.8.0 🚀 🚀 🚀

1) Overall stability
2) AsicBoost revision
3) Refinement of the config multiplier (new features have added when transmitting the config
A) Leave the chips unchanged.
B) Leave the settings of the blades and voltage unchanged.
C) Leave the profile unchanged.
D) Mass transfer function to troubleshoot connection DevFee.
D) Mass transfer silent mode settings.
E) Mass transfer temperature hold settings.
4) Added quiet fan mode when miner starts (at your own risk)
5) Added information output about dead fans in your own log
6) Corrected errors when using Nicehash and finalized #xnsub
7) Made a check of fans, and added a limit of 500-800 rpm (the situation when the rear fan is dead, but rotates due to the flow from the front at the minimum speed)
Redesigned output information when immersion mode turned on. (In the miner status shows snowflakes icon, and now you can see the rmp if you did not remove fans in oil)
9) Corrections orfagrophic errors and values ​​in the web interface)
10) Described the profile information more clearly with an approximate consumption of AB-OFF / AB-ON and output of information on overclocking or down volt.
10) 4 new profiles were added to 18.5, 19, 19.5, 20x.
11) Added Spanish localization .
12) Made updates to the Linux libraries.

https://www.dropbox.com/s/5kmc39oq5ikqy8x/Antminer-S9-xilinx-vnish-current-p2pool.tar.gz?dl=1

New p2pool node for X11 coin - Futurocoin

http://p2p-spb.xyz:3033/static/ - Saint-Petersburg (Russia)
http://p2p-south.xyz:3033/static/ - Rostov-on-Don (Russia)
http://p2p-ekb.xyz:3033/static/ - Ekaterinburg (Russia)
http://p2p-usa.xyz:3033/static/ - Chicago (Usa)

Dear miners

New pool for sha256 asics opened

Japan coin - Susucoin 😂

Trade on https://www.coinexchange.io/market/SUSU/BTC

Nodes:
http://sha256.p2p-spb.xyz:3029/static/ - Saint-Petersburg (Russia)
http://p2p-south.xyz:3029/static/ - Rostov-on-Don (Russia)
http://p2p-ekb.xyz:3029/static/ - Ekaterinburg (Russia)
http://p2p-usa.xyz:3029/static/ - Chicago (Usa)

Support ALL address type, AsicBoost, NiceHash

New version VNISH (AsicDip) firmware for my p2pool nodes - 3.7.7

1) Overall stability.
2) Updated libraries for Hive OS.
3) Added function -1 for HW.
4) Added #xnsub (this is how you add as example stratum.antpool.com:3333#xnsub).
5) Added the ability to set a reboot restriction with by trigger when say a blade got disconnected (You can set the maximum number of reboots. The counter is reset after the entire reboot or power-off).
6) The tuning log has been redesigned, the maximum number of lines is 20, if more than 20 the oldest records are deleted.
7) The log can be saved to a file.
The function of exporting the configuration in a multiplier has been added (for reproduction of overclocking, down-volt, applying a profile via BTC Tools).
Added new profile, frequency 700 voltage 8.6 (14.7th)
9) Added monitoring integration Anthill.farm (see the monitoring section).
10) Refinement, operation of fans and temperature sensors.
11) Refinement virus detection, and exclusion of infection in version 3.7.7
12) Fixed error displaying online voltage in the absence of boards.

https://www.dropbox.com/s/5kmc39oq5ikqy8x/Antminer-S9-xilinx-vnish-current-p2pool.tar.gz?dl=1

With this firmware version ONLY on my p2pool nodes - fee 0%.

To answer a frequent question. With this firmware, you can mine on any pool.

Yes, but in classic stats page (http://p2p-south.xyz:9338/static/classic/graphs.html?Day) correct ONLY NODE(!!) stats

Only it takes into account your real share. But it's ALL shares, ALL miners

User stats below - incorrect.

Look here.

Example

http://p2p-south.xyz:9338/static/

ONLY 1 miner!

DOA incorrect - DOA 820.98 GH/s / 1.92%

Why? But because http://p2p-south.xyz:9338/static/classic/graphs.html?Day
Second graph - good (mean: 31.5TH/s)
Area: 2.72EH (100% total)

DOA is missing. There are no losses in payments.

I can see my test in that page:

Dead
Mean: 261GH/s
Area: 22.5PH

Total
Mean: 4.12TH/s
Area: 356PH

so 6.32% DOA

I Just want to find the best configuration (Like everybody, jeje), and i will test the options off course. Lets see what can find, do my run in BCH 6 or 7 days, and then jump to BTC  .

Im tired for now, tomorrow will test south server.

Thank you!

I'll check EKB, very strange

Now the difficulty for Nicehash is selected automatically

Don't look at the DOA

This indicator is not correctly determined

Look here http://p2p-spb.xyz:9338/static/classic/graphs.html?Day

Here, the data about the shares

And - good (mean: 275TH/s)
Area: 23.7EH (100% total)

100% GOOD

You get paid for shares

ekb didn´t set it with or without +1048576 (In fact with +1048576 is worse  )

Already do a test on spb, works well but with 25 - 52 % Delta on nicehash and 8 -12 % DOA on your pool 

Later will test on south

Do you know if nicehash can do a ping to your servers? i cant find that tool, thats why i asking you! what of the 3 servers you know or think is better for the Nicehash EU, i think for the nicehash USA is the usa server, because there is only one, but EU is other story!

Thanks!

Hi

All my servers know how to work with Nicehash! Full natively support.

You don't need to add +1000000. But this working.

Recognition of Nicehash is automatic. The difficulty is given automatically.

Ping to p2p-spb.xyz
p2p-ekb.xyz
p2p-south.xyz

And use best.

Hello Kr1z1s!

Any advise to connect from nicehash?

Im trying BCH from nicehash EU in http://p2p-ekb.xyz:9338
Wich of your servers do you tink is best for nicehash EU?

Also how to set minimum difficulty of 1000000 required for nicehash?
Do your servers accept "Append "+difficulty" string to your P2Pool connection username"  like stated in https://www.nicehash.com/help/which-mining-pools-are-supported

Without it the order turns from alive to dead very often.

and with it  works very ugly and most of the time is dead

For now im just trying Asicboost, advise too about using or not using it please.

Thanks in advance!

Attention!

On DGB nodes sha256, scrypt and qubit algo ALL addresses types support!
Legacy (P2PKH) on D, so-called Segwit address (P2PKH) on S and new type bech32 address on dgb

skein and groeastl algo - later

Hello,

Can you please contact me on [email protected]. Need to have a contact at your mining pool.

Kind Regards,
Koen Peters
[email protected]

release 3.7.4.1 asicdip S9 firmware from VNISH for my SHA256 nodes

1) overall stability;
2) when corrected BUG ASIC could pour HW;
3) added in a tune HW section profiles;
4) rendered the regional settings on a separate tab;
5) fix translation errors;
7) small correction BUG-in to work with BTC.com tools;
Updating the log size (that he did not write that filled);
9) a lot of work done under the config multiplier (now he is not inferior BTC.com tools);
Extended functionality, such added features:
1) to propagate configuration does not have the workers`;
2) add to the existing worker is the host name;
3) add to existing worker`s ip address;
4) My worker is completely including the host name;
5) My worker is completely including the ip address;
6) change the pools and to pass the necessary pools.
Addition
1) eliminated BUG log clearance;
2) critical BUG eliminated in a multiplier configuration.

https://www.dropbox.com/s/pkx9valdyqnd56g/Antminer-S9-xilinx-vnish-3.7.4.1-p2pool.tar.gz?dl=1

With this firmware node fee will be equal to 0%.

Bitcoin Atom p2pool node open in Chicago - http://p2p-usa.xyz:3027/static/

I'm p2pool developer

How do you make it that you have a Stratum to P2Pool on VTC that supports CryptoDredge?