Topic: [ANN][P2POOL] p2pool nodes on p2p-usa.xyz(Chicago) - page 5. (Read 23264 times)

How do you make it that you have a Stratum to P2Pool on VTC that supports CryptoDredge?

Dear miners, below is the important information on my SHA256 nodes!
As many know that last time me and vnish were working closely on his firmware’s update for Antminer S9  to provide more stable work on p2pools, especially on BTC p2pool.

One of the results from this cooperation is the developing of his firmware’s modification for my sha256 nodes.

The point is that many people use his firmware with fee, mining on p2pools sha256 and especially on my nodes. In this case total fee is 2% for developer and 1% for me.

In new developed firmware modification the total fee is 1% for developer and 1%  for me. In this case, if you use exactly original firmware modification for p2pool, there will be no fee as it has been already included to the firmware.

The nodes themselves are developed in order not to take node’s fee from miners, who are using this firmware.

With the support of active participant Sedsem it was checked, how it works. And he can confirm that even with the fixed 99,99% fee on node - there was not fee taken from him during the mining.

At the same time all functions of original firmware by vnish are fully secured.  And mining is allowed everywhere - not only on p2pool.

Currently link for firmware downloading is presenting on each sha256 node except the Auracoin, which  is almost not being mined.  If it’s necessary this coin will be developed too.

Direct link to my Dropbox with firmware is  https://www.dropbox.com/s/xh0jtr65ocww0re/Antminer-S9-xilinx-vnish-3.7.3-p2pool.tar.gz?dl=1

Did not see the question, sorry.

My nodes Digibyte SHA256
The question was about him?

http://p2p-usa.xyz:5027/static/ - 228.94 TH/s
http://p2p-spb.xyz:5027/static/ - 568.12 TH/s
http://p2p-south.xyz:5027/static/ - 489.33 TH/s

Not the whole pool. Here's the scanner. http://www.p2pool.site/scanner/dgb-sha256d.html

New Bitcore p2pool nodes


Chicago (USA) - http://p2p-usa.xyz:3017/static/
Saint-Petersburg (RU) - http://p2p-spb.xyz:3017/static/
Rostov-on-Don (RU) -  http://p2p-south.xyz:3017/static/
Ekaterinburg (RU) -  http://p2p-ekb.xyz:3017/static/

fee 1%

Settings for mining (example for USA node)

POOL - "stratum+tcp://p2p-usa.xyz:3017"
USER - "Your_BTX_PayoutAddress"
PASSWORD - "x"
Options "--no-extranonce" (If this option exists)

Recomended official CORE wallet and Coinomi mobile wallet

Quick question to the pool owner


Pool interface says : Global pool rate:    2.81 PH/s
EU pool
Local rate:    297.90 TH/s


US pool
Local rate:    431.84 TH/s

That makes us 728TH/s at which pool is the rest 2PH/s hashrate ?

thanks is advance

Can you join to t.me/DGBSupport ?

You should enter there your private keys or seed to recover all coins from there to another address.
If yoy still have problems please contact t.me/DGBSupport

Here is service. https://mctrivia.github.io/DigiSweep/index.html

https://chainz.cryptoid.info/dgb/address.dws?DH5QU4Q1zWJDs2jQVc1Wxb2Fv12EGe9Wx9.htm

You coins.

DGB Chrome App wallet not support generated(coinbase) transactions

If you can import from a wallet privkey or seed phrases, then you can try to recover money to other wallet

Which DGB address format did you use?!
I am also mining on Qubit, using Legacy DGB address which starting with D
Other DGB addresses such as dgb1... or S... won’t work and your ASIC (Baikal x10 or G28) shouldn’t be connected to p2pool

Even though you can recover your coins with seed from Coinomi.

Conract to DigiByte support channel on t.me/DGBSupport

https://en.bitcoin.it/wiki/P2Pool

As long as the chain has your shares - you get coins with new blocks. What address are you mining to?

This is a blockexplorer that takes information from the blockchain. So your wallet does not know how to work with such transactions.

Write to the technical support of this wallet. Attach transaction references. Ask them to solve the issue. And change your wallet if you want to keep going. Use the official wallet - Core or Coinomi (for Android and IOS) or Bittrex (Exchange)

Immediately upon finding the block.

https://chainz.cryptoid.info/dgb/block.dws?0000000000000000ec9bf661e6565a231454e5f819aaea08e2af6074d0504825

This is blockexplorer. You can see. What wallet do you use? If you do not receive coins, then your wallet does not support generated transactions.

This is p2pool. When p2pool find a block -  using a generated transaction, coins recorded on the addresses of miners.

This wallet works well with p2pool. But you use BECH32 address. p2pool is not working yet with bech32. Need use LEGACY address.
Support for new addresses will be added later.

This is my first time attempting to use P2Pool.

I've had no payouts for 48 hours on either of two DGB Qubit pools. Can someone offer some assistance?

I currently have my ASIC Miner going to stratum+tcp://p2p-usa.xyz:5023   pass 111
My incoming address is to a DGB wallet that is inside the Coinomi multiwallet. Do I need to be running P2Pool software or a full DGB node locally for this to work?

May be clean cookie?

You can use the latest firmware from Bitmain

Wich browser do you use with that firmware?

Chrome give me 404
IE11 need a  reload on every page and no stats

 

Dear miners!

On SHA-256 nodes Chicago implemented AsicBoost technology (Beta testing)

BTC - http://p2p-usa.xyz:9334/static/
BCH - http://p2p-usa.xyz:9338/static/
LCC - http://p2p-usa.xyz:5555/static/
DGB - http://p2p-usa.xyz:5027/static/

Attention! At frequencies different from the default, some miners have problems when working on the nodes with AsicBoost.

ABC